All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Andrew Lunn" <andrew@lunn.ch>,
	"Gregory Clement" <gregory.clement@bootlin.com>,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
	"Vladimir Vid" <vladimir.vid@sartura.hr>,
	"Marek Behún" <kabel@kernel.org>,
	linux-clk@vger.kernel.org, linux-serial@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH v7 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it
Date: Thu, 30 Sep 2021 11:58:37 +0200	[thread overview]
Message-ID: <20210930095838.28145-6-pali@kernel.org> (raw)
In-Reply-To: <20210930095838.28145-1-pali@kernel.org>

This change defines DT node for UART clock "marvell,armada-3700-uart-clock"
and use this UART clock as a base clock for all UART devices.

Signed-off-by: Pali Rohár <pali@kernel.org>

---
Changes in v6:
* Do not disable uartclk by default
* Rename node to clock-controller@12010
---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 9acc5d2b5a00..f9bfe73d8ec2 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -132,10 +132,20 @@
 				reg = <0x11500 0x40>;
 			};
 
+			uartclk: clock-controller@12010 {
+				compatible = "marvell,armada-3700-uart-clock";
+				reg = <0x12010 0x4>, <0x12210 0x4>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+					<&tbg 3>, <&xtalclk>;
+				clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S",
+					"TBG-B-S", "xtal";
+				#clock-cells = <1>;
+			};
+
 			uart0: serial@12000 {
 				compatible = "marvell,armada-3700-uart";
 				reg = <0x12000 0x18>;
-				clocks = <&xtalclk>;
+				clocks = <&uartclk 0>;
 				interrupts =
 				<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
@@ -147,7 +157,7 @@
 			uart1: serial@12200 {
 				compatible = "marvell,armada-3700-uart-ext";
 				reg = <0x12200 0x30>;
-				clocks = <&xtalclk>;
+				clocks = <&uartclk 1>;
 				interrupts =
 				<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
 				<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: "Pali Rohár" <pali@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Andrew Lunn" <andrew@lunn.ch>,
	"Gregory Clement" <gregory.clement@bootlin.com>,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
	"Vladimir Vid" <vladimir.vid@sartura.hr>,
	"Marek Behún" <kabel@kernel.org>,
	linux-clk@vger.kernel.org, linux-serial@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH v7 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it
Date: Thu, 30 Sep 2021 11:58:37 +0200	[thread overview]
Message-ID: <20210930095838.28145-6-pali@kernel.org> (raw)
In-Reply-To: <20210930095838.28145-1-pali@kernel.org>

This change defines DT node for UART clock "marvell,armada-3700-uart-clock"
and use this UART clock as a base clock for all UART devices.

Signed-off-by: Pali Rohár <pali@kernel.org>

---
Changes in v6:
* Do not disable uartclk by default
* Rename node to clock-controller@12010
---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 9acc5d2b5a00..f9bfe73d8ec2 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -132,10 +132,20 @@
 				reg = <0x11500 0x40>;
 			};
 
+			uartclk: clock-controller@12010 {
+				compatible = "marvell,armada-3700-uart-clock";
+				reg = <0x12010 0x4>, <0x12210 0x4>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+					<&tbg 3>, <&xtalclk>;
+				clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S",
+					"TBG-B-S", "xtal";
+				#clock-cells = <1>;
+			};
+
 			uart0: serial@12000 {
 				compatible = "marvell,armada-3700-uart";
 				reg = <0x12000 0x18>;
-				clocks = <&xtalclk>;
+				clocks = <&uartclk 0>;
 				interrupts =
 				<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
@@ -147,7 +157,7 @@
 			uart1: serial@12200 {
 				compatible = "marvell,armada-3700-uart-ext";
 				reg = <0x12200 0x30>;
-				clocks = <&xtalclk>;
+				clocks = <&uartclk 1>;
 				interrupts =
 				<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
 				<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-09-30  9:59 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-30  9:58 [PATCH v7 0/6] serial: mvebu-uart: Support for higher baudrates Pali Rohár
2021-09-30  9:58 ` Pali Rohár
2021-09-30  9:58 ` [PATCH v7 1/6] math64: New DIV_U64_ROUND_CLOSEST helper Pali Rohár
2021-09-30  9:58   ` Pali Rohár
2021-09-30  9:58 ` [PATCH v7 2/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Pali Rohár
2021-09-30  9:58   ` Pali Rohár
2021-10-13 14:16   ` Gregory CLEMENT
2021-10-13 14:16     ` Gregory CLEMENT
2021-10-13 14:21     ` Pali Rohár
2021-10-13 14:21       ` Pali Rohár
2021-09-30  9:58 ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-09-30  9:58   ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell, armada-3700-uart-clock Pali Rohár
2021-10-06 21:07   ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Rob Herring
2021-10-06 21:07     ` Rob Herring
2021-10-15  0:13   ` Stephen Boyd
2021-10-15  0:13     ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell, armada-3700-uart-clock Stephen Boyd
2021-10-15  9:09     ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-10-15  9:09       ` Pali Rohár
2021-10-15  9:37       ` Pali Rohár
2021-10-15  9:37         ` Pali Rohár
2021-10-15 21:55         ` Stephen Boyd
2021-10-15 21:55           ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell, armada-3700-uart-clock Stephen Boyd
2021-10-15 22:08           ` Mark Kettenis
2021-10-15 22:08             ` Mark Kettenis
2021-10-16  6:42           ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-10-16  6:42             ` Pali Rohár
2022-01-15  8:02             ` Stephen Boyd
2022-01-15  8:02               ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell, armada-3700-uart-clock Stephen Boyd
2022-01-15 11:50               ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2022-01-15 11:50                 ` Pali Rohár
2022-01-15 12:05                 ` Marek Behún
2022-01-15 12:05                   ` Marek Behún
2022-01-15 12:26                   ` Pali Rohár
2022-01-15 12:26                     ` Pali Rohár
2022-01-19 23:16                     ` Stephen Boyd
2022-01-19 23:16                       ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell, armada-3700-uart-clock Stephen Boyd
2022-01-20  0:06                       ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2022-01-20  0:06                         ` Pali Rohár
2022-01-20  6:01                         ` Stephen Boyd
2022-01-20  6:01                           ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell, armada-3700-uart-clock Stephen Boyd
2022-01-20  9:26                           ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2022-01-20  9:26                             ` Pali Rohár
2022-01-25 20:40                             ` Stephen Boyd
2022-01-25 20:40                               ` [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell, armada-3700-uart-clock Stephen Boyd
2021-09-30  9:58 ` [PATCH v7 4/6] dt-bindings: mvebu-uart: update information about UART clock Pali Rohár
2021-09-30  9:58   ` Pali Rohár
2021-10-06 21:11   ` Rob Herring
2021-10-06 21:11     ` Rob Herring
2021-09-30  9:58 ` Pali Rohár [this message]
2021-09-30  9:58   ` [PATCH v7 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Pali Rohár
2021-10-13 14:13   ` Gregory CLEMENT
2021-10-13 14:13     ` Gregory CLEMENT
2021-10-13 14:19     ` Pali Rohár
2021-10-13 14:19       ` Pali Rohár
2021-09-30  9:58 ` [PATCH v7 6/6] serial: mvebu-uart: implement support for baudrates higher than 230400 Pali Rohár
2021-09-30  9:58   ` Pali Rohár
2021-10-01 12:11 ` [PATCH v7 0/6] serial: mvebu-uart: Support for higher baudrates Pali Rohár
2021-10-01 12:11   ` Pali Rohár
2021-11-03 21:42 ` Pali Rohár
2021-11-03 21:42   ` Pali Rohár
2021-12-17 17:23   ` Gregory CLEMENT
2021-12-17 17:23     ` Gregory CLEMENT
2022-01-14 10:51     ` Pali Rohár
2022-01-14 10:51       ` Pali Rohár
2022-01-14 22:56       ` Stephen Boyd
2022-01-14 22:56         ` Stephen Boyd
2022-01-14 23:05         ` Pali Rohár
2022-01-14 23:05           ` Pali Rohár
2022-01-14 23:16           ` Stephen Boyd
2022-01-14 23:16             ` Stephen Boyd
2022-01-14 23:20             ` Pali Rohár
2022-01-14 23:20               ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210930095838.28145-6-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=gregory.clement@bootlin.com \
    --cc=kabel@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=vladimir.vid@sartura.hr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.