All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: Frieder Schrempf <frieder@fris.de>
Cc: devicetree@vger.kernel.org,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	stable@vger.kernel.org, Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: Re: [PATCH 5/8] arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
Date: Tue, 5 Oct 2021 15:12:31 +0800	[thread overview]
Message-ID: <20211005071230.GC20743@dragon> (raw)
In-Reply-To: <20210930155633.2745201-6-frieder@fris.de>

On Thu, Sep 30, 2021 at 05:56:28PM +0200, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@kontron.de>
> 
> The MCP2515 can be used with an SPI clock of up to 10 MHz. Set the
> limit accordingly to prevent any performance issues caused by the
> really low clock speed of 100 kHz.

Could you share some testing result of this change?

> 
> Fixes: 21c4f45b335f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")

It's really an optimization rather than fix, isn't it?

Shawn

> Cc: stable@vger.kernel.org
> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
> index f2c8ccefd1bf..dbf11e03ecce 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
> @@ -98,7 +98,7 @@ can0: can@0 {
>  		clocks = <&osc_can>;
>  		interrupt-parent = <&gpio4>;
>  		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
> -		spi-max-frequency = <100000>;
> +		spi-max-frequency = <10000000>;
>  		vdd-supply = <&reg_vdd_3v3>;
>  		xceiver-supply = <&reg_vdd_5v>;
>  	};
> -- 
> 2.33.0
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Frieder Schrempf <frieder@fris.de>
Cc: devicetree@vger.kernel.org,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	stable@vger.kernel.org, Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: Re: [PATCH 5/8] arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
Date: Tue, 5 Oct 2021 15:12:31 +0800	[thread overview]
Message-ID: <20211005071230.GC20743@dragon> (raw)
In-Reply-To: <20210930155633.2745201-6-frieder@fris.de>

On Thu, Sep 30, 2021 at 05:56:28PM +0200, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@kontron.de>
> 
> The MCP2515 can be used with an SPI clock of up to 10 MHz. Set the
> limit accordingly to prevent any performance issues caused by the
> really low clock speed of 100 kHz.

Could you share some testing result of this change?

> 
> Fixes: 21c4f45b335f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")

It's really an optimization rather than fix, isn't it?

Shawn

> Cc: stable@vger.kernel.org
> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
> index f2c8ccefd1bf..dbf11e03ecce 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
> @@ -98,7 +98,7 @@ can0: can@0 {
>  		clocks = <&osc_can>;
>  		interrupt-parent = <&gpio4>;
>  		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
> -		spi-max-frequency = <100000>;
> +		spi-max-frequency = <10000000>;
>  		vdd-supply = <&reg_vdd_3v3>;
>  		xceiver-supply = <&reg_vdd_5v>;
>  	};
> -- 
> 2.33.0
> 

  reply	other threads:[~2021-10-05  7:14 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-30 15:56 [PATCH 0/8] Devicetree fixes and additions for Kontron SL/BL i.MX8MM boards Frieder Schrempf
2021-09-30 15:56 ` Frieder Schrempf
2021-09-30 15:56 ` [PATCH 1/8] arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on SD card Frieder Schrempf
2021-09-30 15:56   ` Frieder Schrempf
2021-10-05  6:45   ` Shawn Guo
2021-10-05  6:45     ` Shawn Guo
2021-10-15 10:44     ` Frieder Schrempf
2021-10-15 10:44       ` Frieder Schrempf
2021-09-30 15:56 ` [PATCH 2/8] arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct Frieder Schrempf
2021-09-30 15:56   ` Frieder Schrempf
2021-09-30 16:02   ` Frieder Schrempf
2021-09-30 16:02     ` Frieder Schrempf
2021-10-05  6:49     ` Shawn Guo
2021-10-05  6:49       ` Shawn Guo
2021-10-05  6:53   ` Shawn Guo
2021-10-05  6:53     ` Shawn Guo
2021-10-05 13:10     ` Frieder Schrempf
2021-10-05 13:10       ` Frieder Schrempf
2021-10-15  3:51       ` Shawn Guo
2021-10-15  3:51         ` Shawn Guo
2021-09-30 15:56 ` [PATCH 3/8] arm64: dts: imx8mm-kontron: Set VDD_SNVS to 800 mV Frieder Schrempf
2021-09-30 15:56   ` Frieder Schrempf
2021-10-05  6:56   ` Shawn Guo
2021-10-05  6:56     ` Shawn Guo
2021-10-05 13:14     ` Frieder Schrempf
2021-10-05 13:14       ` Frieder Schrempf
2021-10-15  4:04       ` Shawn Guo
2021-10-15  4:04         ` Shawn Guo
2021-09-30 15:56 ` [PATCH 4/8] arm64: dts: imx8mm-kontron: Fix reg_rst_eth2 and reg_vdd_5v regulators Frieder Schrempf
2021-09-30 15:56   ` Frieder Schrempf
2021-10-05  7:09   ` Shawn Guo
2021-10-05  7:09     ` Shawn Guo
2021-10-05 17:06     ` Frieder Schrempf
2021-10-05 17:06       ` Frieder Schrempf
2021-10-15  4:09       ` Shawn Guo
2021-10-15  4:09         ` Shawn Guo
2021-10-15 11:32         ` Frieder Schrempf
2021-10-15 11:32           ` Frieder Schrempf
2021-09-30 15:56 ` [PATCH 5/8] arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency Frieder Schrempf
2021-09-30 15:56   ` Frieder Schrempf
2021-10-05  7:12   ` Shawn Guo [this message]
2021-10-05  7:12     ` Shawn Guo
2021-10-05 17:17     ` Frieder Schrempf
2021-10-05 17:17       ` Frieder Schrempf
2021-10-15  4:12       ` Shawn Guo
2021-10-15  4:12         ` Shawn Guo
2021-09-30 15:56 ` [PATCH 6/8] arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY Frieder Schrempf
2021-10-02 18:14   ` Heiko Thiery
2021-10-02 18:08   ` Heiko Thiery
2021-09-30 15:56   ` Frieder Schrempf
2021-10-05  7:20   ` Shawn Guo
2021-10-05  7:20     ` Shawn Guo
2021-09-30 15:56 ` [PATCH 7/8] arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY Frieder Schrempf
2021-09-30 15:56   ` Frieder Schrempf
2021-09-30 15:56 ` [PATCH 8/8] arm64: dts: imx8mm-kontron: Leave reg_vdd_arm always powered on Frieder Schrempf
2021-09-30 15:56   ` Frieder Schrempf
2021-09-30 18:52   ` Heiko Thiery
2021-09-30 18:52     ` Heiko Thiery
2021-10-05  7:27   ` Shawn Guo
2021-10-05  7:27     ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211005071230.GC20743@dragon \
    --to=shawnguo@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=frieder.schrempf@kontron.de \
    --cc=frieder@fris.de \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.