Re: [PATCH v2 2/7] hw/i2c: Read FIFO during RXF_CTL change in NPCM7XX SMBus

[Corey Minyard <minyard@acm.org>]

On Thu, Oct 21, 2021 at 11:39:51AM -0700, Hao Wu wrote:
> Originally we read in from SMBus when RXF_STS is cleared. However,
> the driver clears RXF_STS before setting RXF_CTL, causing the SM bus
> module to read incorrect amount of bytes in FIFO mode when the number
> of bytes read changed. This patch fixes this issue.
> 
> Signed-off-by: Hao Wu <wuhaotsh@google.com>
> Reviewed-by: Titus Rwantare <titusr@google.com>

This looks ok.  I assume you can take this in with the rest of the
patches.

Acked-by: Corey Minyard <cminyard@mvista.com>

> ---
>  hw/i2c/npcm7xx_smbus.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/hw/i2c/npcm7xx_smbus.c b/hw/i2c/npcm7xx_smbus.c
> index f18e311556..1435daea94 100644
> --- a/hw/i2c/npcm7xx_smbus.c
> +++ b/hw/i2c/npcm7xx_smbus.c
> @@ -637,9 +637,6 @@ static void npcm7xx_smbus_write_rxf_sts(NPCM7xxSMBusState *s, uint8_t value)
>  {
>      if (value & NPCM7XX_SMBRXF_STS_RX_THST) {
>          s->rxf_sts &= ~NPCM7XX_SMBRXF_STS_RX_THST;
> -        if (s->status == NPCM7XX_SMBUS_STATUS_RECEIVING) {
> -            npcm7xx_smbus_recv_fifo(s);
> -        }
>      }
>  }
>  
> @@ -651,6 +648,9 @@ static void npcm7xx_smbus_write_rxf_ctl(NPCM7xxSMBusState *s, uint8_t value)
>          new_ctl = KEEP_OLD_BIT(s->rxf_ctl, new_ctl, NPCM7XX_SMBRXF_CTL_LAST);
>      }
>      s->rxf_ctl = new_ctl;
> +    if (s->status == NPCM7XX_SMBUS_STATUS_RECEIVING) {
> +        npcm7xx_smbus_recv_fifo(s);
> +    }
>  }
>  
>  static uint64_t npcm7xx_smbus_read(void *opaque, hwaddr offset, unsigned size)
> -- 
> 2.33.0.1079.g6e70778dc9-goog
> 
>