All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@kernel.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v3 1/2] ath11k: add ab to TARGET_NUM_VDEVS & co
Date: Thu,  9 Dec 2021 12:43:50 +0200	[thread overview]
Message-ID: <20211209104351.9811-2-kvalo@kernel.org> (raw)
In-Reply-To: <20211209104351.9811-1-kvalo@kernel.org>

From: Kalle Valo <quic_kvalo@quicinc.com>

The next patch changes TARGET_NUM_VDEVS to be dynamic and need access to ab.
Add ab separately to keep the next patch simple.

Compile tested only.

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/core.c |  2 +-
 drivers/net/wireless/ath/ath11k/hw.c   | 14 +++++++-------
 drivers/net/wireless/ath/ath11k/hw.h   | 18 +++++++++---------
 drivers/net/wireless/ath/ath11k/mac.c  | 10 +++++-----
 4 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 1d983fde6fc9..c08e96522332 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -1067,7 +1067,7 @@ static int ath11k_core_reconfigure_on_crash(struct ath11k_base *ab)
 	ath11k_dp_free(ab);
 	ath11k_hal_srng_deinit(ab);
 
-	ab->free_vdev_map = (1LL << (ab->num_radios * TARGET_NUM_VDEVS)) - 1;
+	ab->free_vdev_map = (1LL << (ab->num_radios * TARGET_NUM_VDEVS(ab))) - 1;
 
 	ret = ath11k_hal_srng_init(ab);
 	if (ret)
diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index 2f0b526188e4..3b0fdc1a6b3f 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -150,18 +150,18 @@ static void ath11k_hw_ipq8074_reo_setup(struct ath11k_base *ab)
 static void ath11k_init_wmi_config_ipq8074(struct ath11k_base *ab,
 					   struct target_resource_config *config)
 {
-	config->num_vdevs = ab->num_radios * TARGET_NUM_VDEVS;
+	config->num_vdevs = ab->num_radios * TARGET_NUM_VDEVS(ab);
 
 	if (ab->num_radios == 2) {
-		config->num_peers = TARGET_NUM_PEERS(DBS);
-		config->num_tids = TARGET_NUM_TIDS(DBS);
+		config->num_peers = TARGET_NUM_PEERS(ab, DBS);
+		config->num_tids = TARGET_NUM_TIDS(ab, DBS);
 	} else if (ab->num_radios == 3) {
-		config->num_peers = TARGET_NUM_PEERS(DBS_SBS);
-		config->num_tids = TARGET_NUM_TIDS(DBS_SBS);
+		config->num_peers = TARGET_NUM_PEERS(ab, DBS_SBS);
+		config->num_tids = TARGET_NUM_TIDS(ab, DBS_SBS);
 	} else {
 		/* Control should not reach here */
-		config->num_peers = TARGET_NUM_PEERS(SINGLE);
-		config->num_tids = TARGET_NUM_TIDS(SINGLE);
+		config->num_peers = TARGET_NUM_PEERS(ab, SINGLE);
+		config->num_tids = TARGET_NUM_TIDS(ab, SINGLE);
 	}
 	config->num_offload_peers = TARGET_NUM_OFFLD_PEERS;
 	config->num_offload_reorder_buffs = TARGET_NUM_OFFLD_REORDER_BUFFS;
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index fe6e0cb9476c..7ea3207692dc 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -12,26 +12,26 @@
 /* Target configuration defines */
 
 /* Num VDEVS per radio */
-#define TARGET_NUM_VDEVS	(16 + 1)
+#define TARGET_NUM_VDEVS(ab)	(16 + 1)
 
-#define TARGET_NUM_PEERS_PDEV	(512 + TARGET_NUM_VDEVS)
+#define TARGET_NUM_PEERS_PDEV(ab) (512 + TARGET_NUM_VDEVS(ab))
 
 /* Num of peers for Single Radio mode */
-#define TARGET_NUM_PEERS_SINGLE		(TARGET_NUM_PEERS_PDEV)
+#define TARGET_NUM_PEERS_SINGLE(ab) (TARGET_NUM_PEERS_PDEV(ab))
 
 /* Num of peers for DBS */
-#define TARGET_NUM_PEERS_DBS		(2 * TARGET_NUM_PEERS_PDEV)
+#define TARGET_NUM_PEERS_DBS(ab) (2 * TARGET_NUM_PEERS_PDEV(ab))
 
 /* Num of peers for DBS_SBS */
-#define TARGET_NUM_PEERS_DBS_SBS	(3 * TARGET_NUM_PEERS_PDEV)
+#define TARGET_NUM_PEERS_DBS_SBS(ab)	(3 * TARGET_NUM_PEERS_PDEV(ab))
 
 /* Max num of stations (per radio) */
-#define TARGET_NUM_STATIONS	512
+#define TARGET_NUM_STATIONS(ab)	512
 
-#define TARGET_NUM_PEERS(x)	TARGET_NUM_PEERS_##x
+#define TARGET_NUM_PEERS(ab, x)	TARGET_NUM_PEERS_##x(ab)
 #define TARGET_NUM_PEER_KEYS	2
-#define TARGET_NUM_TIDS(x)	(2 * TARGET_NUM_PEERS(x) + \
-				 4 * TARGET_NUM_VDEVS + 8)
+#define TARGET_NUM_TIDS(ab, x)	(2 * TARGET_NUM_PEERS(ab, x) +	\
+				 4 * TARGET_NUM_VDEVS(ab) + 8)
 
 #define TARGET_AST_SKID_LIMIT	16
 #define TARGET_NUM_OFFLD_PEERS	4
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index b7ab82f4572b..c5968cf1e87a 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5980,9 +5980,9 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
 		goto err;
 	}
 
-	if (ar->num_created_vdevs > (TARGET_NUM_VDEVS - 1)) {
+	if (ar->num_created_vdevs > (TARGET_NUM_VDEVS(ab) - 1)) {
 		ath11k_warn(ab, "failed to create vdev %u, reached max vdev limit %d\n",
-			    ar->num_created_vdevs, TARGET_NUM_VDEVS);
+			    ar->num_created_vdevs, TARGET_NUM_VDEVS(ab));
 		ret = -EBUSY;
 		goto err;
 	}
@@ -8178,8 +8178,8 @@ static int __ath11k_mac_register(struct ath11k *ar)
 	ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE |
 				   NL80211_FEATURE_AP_SCAN;
 
-	ar->max_num_stations = TARGET_NUM_STATIONS;
-	ar->max_num_peers = TARGET_NUM_PEERS_PDEV;
+	ar->max_num_stations = TARGET_NUM_STATIONS(ab);
+	ar->max_num_peers = TARGET_NUM_PEERS_PDEV(ab);
 
 	ar->hw->wiphy->max_ap_assoc_sta = ar->max_num_stations;
 
@@ -8277,7 +8277,7 @@ int ath11k_mac_register(struct ath11k_base *ab)
 
 	/* Initialize channel counters frequency value in hertz */
 	ab->cc_freq_hz = IPQ8074_CC_FREQ_HERTZ;
-	ab->free_vdev_map = (1LL << (ab->num_radios * TARGET_NUM_VDEVS)) - 1;
+	ab->free_vdev_map = (1LL << (ab->num_radios * TARGET_NUM_VDEVS(ab))) - 1;
 
 	for (i = 0; i < ab->num_radios; i++) {
 		pdev = &ab->pdevs[i];
-- 
2.20.1


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@kernel.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v3 1/2] ath11k: add ab to TARGET_NUM_VDEVS & co
Date: Thu,  9 Dec 2021 12:43:50 +0200	[thread overview]
Message-ID: <20211209104351.9811-2-kvalo@kernel.org> (raw)
In-Reply-To: <20211209104351.9811-1-kvalo@kernel.org>

From: Kalle Valo <quic_kvalo@quicinc.com>

The next patch changes TARGET_NUM_VDEVS to be dynamic and need access to ab.
Add ab separately to keep the next patch simple.

Compile tested only.

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/core.c |  2 +-
 drivers/net/wireless/ath/ath11k/hw.c   | 14 +++++++-------
 drivers/net/wireless/ath/ath11k/hw.h   | 18 +++++++++---------
 drivers/net/wireless/ath/ath11k/mac.c  | 10 +++++-----
 4 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 1d983fde6fc9..c08e96522332 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -1067,7 +1067,7 @@ static int ath11k_core_reconfigure_on_crash(struct ath11k_base *ab)
 	ath11k_dp_free(ab);
 	ath11k_hal_srng_deinit(ab);
 
-	ab->free_vdev_map = (1LL << (ab->num_radios * TARGET_NUM_VDEVS)) - 1;
+	ab->free_vdev_map = (1LL << (ab->num_radios * TARGET_NUM_VDEVS(ab))) - 1;
 
 	ret = ath11k_hal_srng_init(ab);
 	if (ret)
diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index 2f0b526188e4..3b0fdc1a6b3f 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -150,18 +150,18 @@ static void ath11k_hw_ipq8074_reo_setup(struct ath11k_base *ab)
 static void ath11k_init_wmi_config_ipq8074(struct ath11k_base *ab,
 					   struct target_resource_config *config)
 {
-	config->num_vdevs = ab->num_radios * TARGET_NUM_VDEVS;
+	config->num_vdevs = ab->num_radios * TARGET_NUM_VDEVS(ab);
 
 	if (ab->num_radios == 2) {
-		config->num_peers = TARGET_NUM_PEERS(DBS);
-		config->num_tids = TARGET_NUM_TIDS(DBS);
+		config->num_peers = TARGET_NUM_PEERS(ab, DBS);
+		config->num_tids = TARGET_NUM_TIDS(ab, DBS);
 	} else if (ab->num_radios == 3) {
-		config->num_peers = TARGET_NUM_PEERS(DBS_SBS);
-		config->num_tids = TARGET_NUM_TIDS(DBS_SBS);
+		config->num_peers = TARGET_NUM_PEERS(ab, DBS_SBS);
+		config->num_tids = TARGET_NUM_TIDS(ab, DBS_SBS);
 	} else {
 		/* Control should not reach here */
-		config->num_peers = TARGET_NUM_PEERS(SINGLE);
-		config->num_tids = TARGET_NUM_TIDS(SINGLE);
+		config->num_peers = TARGET_NUM_PEERS(ab, SINGLE);
+		config->num_tids = TARGET_NUM_TIDS(ab, SINGLE);
 	}
 	config->num_offload_peers = TARGET_NUM_OFFLD_PEERS;
 	config->num_offload_reorder_buffs = TARGET_NUM_OFFLD_REORDER_BUFFS;
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index fe6e0cb9476c..7ea3207692dc 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -12,26 +12,26 @@
 /* Target configuration defines */
 
 /* Num VDEVS per radio */
-#define TARGET_NUM_VDEVS	(16 + 1)
+#define TARGET_NUM_VDEVS(ab)	(16 + 1)
 
-#define TARGET_NUM_PEERS_PDEV	(512 + TARGET_NUM_VDEVS)
+#define TARGET_NUM_PEERS_PDEV(ab) (512 + TARGET_NUM_VDEVS(ab))
 
 /* Num of peers for Single Radio mode */
-#define TARGET_NUM_PEERS_SINGLE		(TARGET_NUM_PEERS_PDEV)
+#define TARGET_NUM_PEERS_SINGLE(ab) (TARGET_NUM_PEERS_PDEV(ab))
 
 /* Num of peers for DBS */
-#define TARGET_NUM_PEERS_DBS		(2 * TARGET_NUM_PEERS_PDEV)
+#define TARGET_NUM_PEERS_DBS(ab) (2 * TARGET_NUM_PEERS_PDEV(ab))
 
 /* Num of peers for DBS_SBS */
-#define TARGET_NUM_PEERS_DBS_SBS	(3 * TARGET_NUM_PEERS_PDEV)
+#define TARGET_NUM_PEERS_DBS_SBS(ab)	(3 * TARGET_NUM_PEERS_PDEV(ab))
 
 /* Max num of stations (per radio) */
-#define TARGET_NUM_STATIONS	512
+#define TARGET_NUM_STATIONS(ab)	512
 
-#define TARGET_NUM_PEERS(x)	TARGET_NUM_PEERS_##x
+#define TARGET_NUM_PEERS(ab, x)	TARGET_NUM_PEERS_##x(ab)
 #define TARGET_NUM_PEER_KEYS	2
-#define TARGET_NUM_TIDS(x)	(2 * TARGET_NUM_PEERS(x) + \
-				 4 * TARGET_NUM_VDEVS + 8)
+#define TARGET_NUM_TIDS(ab, x)	(2 * TARGET_NUM_PEERS(ab, x) +	\
+				 4 * TARGET_NUM_VDEVS(ab) + 8)
 
 #define TARGET_AST_SKID_LIMIT	16
 #define TARGET_NUM_OFFLD_PEERS	4
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index b7ab82f4572b..c5968cf1e87a 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5980,9 +5980,9 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
 		goto err;
 	}
 
-	if (ar->num_created_vdevs > (TARGET_NUM_VDEVS - 1)) {
+	if (ar->num_created_vdevs > (TARGET_NUM_VDEVS(ab) - 1)) {
 		ath11k_warn(ab, "failed to create vdev %u, reached max vdev limit %d\n",
-			    ar->num_created_vdevs, TARGET_NUM_VDEVS);
+			    ar->num_created_vdevs, TARGET_NUM_VDEVS(ab));
 		ret = -EBUSY;
 		goto err;
 	}
@@ -8178,8 +8178,8 @@ static int __ath11k_mac_register(struct ath11k *ar)
 	ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE |
 				   NL80211_FEATURE_AP_SCAN;
 
-	ar->max_num_stations = TARGET_NUM_STATIONS;
-	ar->max_num_peers = TARGET_NUM_PEERS_PDEV;
+	ar->max_num_stations = TARGET_NUM_STATIONS(ab);
+	ar->max_num_peers = TARGET_NUM_PEERS_PDEV(ab);
 
 	ar->hw->wiphy->max_ap_assoc_sta = ar->max_num_stations;
 
@@ -8277,7 +8277,7 @@ int ath11k_mac_register(struct ath11k_base *ab)
 
 	/* Initialize channel counters frequency value in hertz */
 	ab->cc_freq_hz = IPQ8074_CC_FREQ_HERTZ;
-	ab->free_vdev_map = (1LL << (ab->num_radios * TARGET_NUM_VDEVS)) - 1;
+	ab->free_vdev_map = (1LL << (ab->num_radios * TARGET_NUM_VDEVS(ab))) - 1;
 
 	for (i = 0; i < ab->num_radios; i++) {
 		pdev = &ab->pdevs[i];
-- 
2.20.1


  reply	other threads:[~2021-12-09 10:44 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-09 10:43 [PATCH v3 0/2] ath11k: Change qcn9074 fw to operate in mode-2 Kalle Valo
2021-12-09 10:43 ` Kalle Valo
2021-12-09 10:43 ` Kalle Valo [this message]
2021-12-09 10:43   ` [PATCH v3 1/2] ath11k: add ab to TARGET_NUM_VDEVS & co Kalle Valo
2021-12-14 15:32   ` Kalle Valo
2021-12-14 15:32     ` Kalle Valo
2021-12-09 10:43 ` [PATCH v3 2/2] ath11k: Change qcn9074 fw to operate in mode-2 Kalle Valo
2021-12-09 10:43   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211209104351.9811-2-kvalo@kernel.org \
    --to=kvalo@kernel.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.