All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@kernel.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v3 2/2] ath11k: Change qcn9074 fw to operate in mode-2
Date: Thu,  9 Dec 2021 12:43:51 +0200	[thread overview]
Message-ID: <20211209104351.9811-3-kvalo@kernel.org> (raw)
In-Reply-To: <20211209104351.9811-1-kvalo@kernel.org>

From: Seevalamuthu Mariappan <seevalam@codeaurora.org>

In mode-2 QCN9074 firmware uses 15MB of host memory and firmware
request 1MB size segements in QMI, whereas in mode-0 firmware
uses 45MB of host memory and each segment is of 2MB size.
In mode-2 firmware operates with reduced number of vdevs and peers.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1

Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Patchwork-Id: 12664445
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/core.c | 18 ++++++++++++++++++
 drivers/net/wireless/ath/ath11k/hw.h   |  9 ++++++---
 drivers/net/wireless/ath/ath11k/qmi.c  |  2 +-
 drivers/net/wireless/ath/ath11k/qmi.h  |  1 -
 4 files changed, 25 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index c08e96522332..606e867c36ec 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -79,6 +79,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = false,
 		.supports_sta_ps = false,
 		.cold_boot_calib = true,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
 		.fix_l1ss = true,
@@ -134,6 +137,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = false,
 		.supports_sta_ps = false,
 		.cold_boot_calib = true,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
 		.fix_l1ss = true,
@@ -188,6 +194,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = true,
 		.supports_sta_ps = true,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = true,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
 		.fix_l1ss = true,
@@ -242,6 +251,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = false,
 		.supports_sta_ps = false,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 2,
+		.num_vdevs = 8,
+		.num_peers = 128,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074),
 		.fix_l1ss = true,
@@ -296,6 +308,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = true,
 		.supports_sta_ps = true,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = true,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_wcn6855),
 		.fix_l1ss = false,
@@ -349,6 +364,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = true,
 		.supports_sta_ps = true,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = true,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_wcn6855),
 		.fix_l1ss = false,
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 7ea3207692dc..23f3ce741636 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -12,9 +12,9 @@
 /* Target configuration defines */
 
 /* Num VDEVS per radio */
-#define TARGET_NUM_VDEVS(ab)	(16 + 1)
+#define TARGET_NUM_VDEVS(ab)	(ab->hw_params.num_vdevs)
 
-#define TARGET_NUM_PEERS_PDEV(ab) (512 + TARGET_NUM_VDEVS(ab))
+#define TARGET_NUM_PEERS_PDEV(ab) (ab->hw_params.num_peers + TARGET_NUM_VDEVS(ab))
 
 /* Num of peers for Single Radio mode */
 #define TARGET_NUM_PEERS_SINGLE(ab) (TARGET_NUM_PEERS_PDEV(ab))
@@ -26,7 +26,7 @@
 #define TARGET_NUM_PEERS_DBS_SBS(ab)	(3 * TARGET_NUM_PEERS_PDEV(ab))
 
 /* Max num of stations (per radio) */
-#define TARGET_NUM_STATIONS(ab)	512
+#define TARGET_NUM_STATIONS(ab)	(ab->hw_params.num_peers)
 
 #define TARGET_NUM_PEERS(ab, x)	TARGET_NUM_PEERS_##x(ab)
 #define TARGET_NUM_PEER_KEYS	2
@@ -173,6 +173,9 @@ struct ath11k_hw_params {
 	bool idle_ps;
 	bool supports_sta_ps;
 	bool cold_boot_calib;
+	int fw_mem_mode;
+	u32 num_vdevs;
+	u32 num_peers;
 	bool supports_suspend;
 	u32 hal_desc_sz;
 	bool fix_l1ss;
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index 25eb22cbeaeb..b71781398fc4 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -2830,7 +2830,7 @@ int ath11k_qmi_init_service(struct ath11k_base *ab)
 	memset(&ab->qmi.target_mem, 0, sizeof(struct target_mem_chunk));
 	ab->qmi.ab = ab;
 
-	ab->qmi.target_mem_mode = ATH11K_QMI_TARGET_MEM_MODE_DEFAULT;
+	ab->qmi.target_mem_mode = ab->hw_params.fw_mem_mode;
 	ret = qmi_handle_init(&ab->qmi.handle, ATH11K_QMI_RESP_LEN_MAX,
 			      &ath11k_qmi_ops, ath11k_qmi_msg_handlers);
 	if (ret < 0) {
diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
index d9e95b700765..49db39bf638c 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.h
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -34,7 +34,6 @@
 
 #define QMI_WLANFW_MAX_DATA_SIZE_V01		6144
 #define ATH11K_FIRMWARE_MODE_OFF		4
-#define ATH11K_QMI_TARGET_MEM_MODE_DEFAULT	0
 #define ATH11K_COLD_BOOT_FW_RESET_DELAY		(40 * HZ)
 
 struct ath11k_base;
-- 
2.20.1


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@kernel.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v3 2/2] ath11k: Change qcn9074 fw to operate in mode-2
Date: Thu,  9 Dec 2021 12:43:51 +0200	[thread overview]
Message-ID: <20211209104351.9811-3-kvalo@kernel.org> (raw)
In-Reply-To: <20211209104351.9811-1-kvalo@kernel.org>

From: Seevalamuthu Mariappan <seevalam@codeaurora.org>

In mode-2 QCN9074 firmware uses 15MB of host memory and firmware
request 1MB size segements in QMI, whereas in mode-0 firmware
uses 45MB of host memory and each segment is of 2MB size.
In mode-2 firmware operates with reduced number of vdevs and peers.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1

Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Patchwork-Id: 12664445
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/core.c | 18 ++++++++++++++++++
 drivers/net/wireless/ath/ath11k/hw.h   |  9 ++++++---
 drivers/net/wireless/ath/ath11k/qmi.c  |  2 +-
 drivers/net/wireless/ath/ath11k/qmi.h  |  1 -
 4 files changed, 25 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index c08e96522332..606e867c36ec 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -79,6 +79,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = false,
 		.supports_sta_ps = false,
 		.cold_boot_calib = true,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
 		.fix_l1ss = true,
@@ -134,6 +137,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = false,
 		.supports_sta_ps = false,
 		.cold_boot_calib = true,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
 		.fix_l1ss = true,
@@ -188,6 +194,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = true,
 		.supports_sta_ps = true,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = true,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
 		.fix_l1ss = true,
@@ -242,6 +251,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = false,
 		.supports_sta_ps = false,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 2,
+		.num_vdevs = 8,
+		.num_peers = 128,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074),
 		.fix_l1ss = true,
@@ -296,6 +308,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = true,
 		.supports_sta_ps = true,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = true,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_wcn6855),
 		.fix_l1ss = false,
@@ -349,6 +364,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = true,
 		.supports_sta_ps = true,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = true,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_wcn6855),
 		.fix_l1ss = false,
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 7ea3207692dc..23f3ce741636 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -12,9 +12,9 @@
 /* Target configuration defines */
 
 /* Num VDEVS per radio */
-#define TARGET_NUM_VDEVS(ab)	(16 + 1)
+#define TARGET_NUM_VDEVS(ab)	(ab->hw_params.num_vdevs)
 
-#define TARGET_NUM_PEERS_PDEV(ab) (512 + TARGET_NUM_VDEVS(ab))
+#define TARGET_NUM_PEERS_PDEV(ab) (ab->hw_params.num_peers + TARGET_NUM_VDEVS(ab))
 
 /* Num of peers for Single Radio mode */
 #define TARGET_NUM_PEERS_SINGLE(ab) (TARGET_NUM_PEERS_PDEV(ab))
@@ -26,7 +26,7 @@
 #define TARGET_NUM_PEERS_DBS_SBS(ab)	(3 * TARGET_NUM_PEERS_PDEV(ab))
 
 /* Max num of stations (per radio) */
-#define TARGET_NUM_STATIONS(ab)	512
+#define TARGET_NUM_STATIONS(ab)	(ab->hw_params.num_peers)
 
 #define TARGET_NUM_PEERS(ab, x)	TARGET_NUM_PEERS_##x(ab)
 #define TARGET_NUM_PEER_KEYS	2
@@ -173,6 +173,9 @@ struct ath11k_hw_params {
 	bool idle_ps;
 	bool supports_sta_ps;
 	bool cold_boot_calib;
+	int fw_mem_mode;
+	u32 num_vdevs;
+	u32 num_peers;
 	bool supports_suspend;
 	u32 hal_desc_sz;
 	bool fix_l1ss;
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index 25eb22cbeaeb..b71781398fc4 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -2830,7 +2830,7 @@ int ath11k_qmi_init_service(struct ath11k_base *ab)
 	memset(&ab->qmi.target_mem, 0, sizeof(struct target_mem_chunk));
 	ab->qmi.ab = ab;
 
-	ab->qmi.target_mem_mode = ATH11K_QMI_TARGET_MEM_MODE_DEFAULT;
+	ab->qmi.target_mem_mode = ab->hw_params.fw_mem_mode;
 	ret = qmi_handle_init(&ab->qmi.handle, ATH11K_QMI_RESP_LEN_MAX,
 			      &ath11k_qmi_ops, ath11k_qmi_msg_handlers);
 	if (ret < 0) {
diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
index d9e95b700765..49db39bf638c 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.h
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -34,7 +34,6 @@
 
 #define QMI_WLANFW_MAX_DATA_SIZE_V01		6144
 #define ATH11K_FIRMWARE_MODE_OFF		4
-#define ATH11K_QMI_TARGET_MEM_MODE_DEFAULT	0
 #define ATH11K_COLD_BOOT_FW_RESET_DELAY		(40 * HZ)
 
 struct ath11k_base;
-- 
2.20.1


  parent reply	other threads:[~2021-12-09 10:44 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-09 10:43 [PATCH v3 0/2] ath11k: Change qcn9074 fw to operate in mode-2 Kalle Valo
2021-12-09 10:43 ` Kalle Valo
2021-12-09 10:43 ` [PATCH v3 1/2] ath11k: add ab to TARGET_NUM_VDEVS & co Kalle Valo
2021-12-09 10:43   ` Kalle Valo
2021-12-14 15:32   ` Kalle Valo
2021-12-14 15:32     ` Kalle Valo
2021-12-09 10:43 ` Kalle Valo [this message]
2021-12-09 10:43   ` [PATCH v3 2/2] ath11k: Change qcn9074 fw to operate in mode-2 Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211209104351.9811-3-kvalo@kernel.org \
    --to=kvalo@kernel.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.