From: Boris Brezillon <boris.brezillon@collabora.com>
To: Apurva Nandan <a-nandan@ti.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Mark Brown <broonie@kernel.org>,
Patrice Chotard <patrice.chotard@foss.st.com>,
Christophe Kerello <christophe.kerello@foss.st.com>,
Daniel Palmer <daniel@0x0f.com>,
Alexander Lobakin <alobakin@pm.me>,
<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<linux-spi@vger.kernel.org>, <p.yadav@ti.com>
Subject: Re: [PATCH v3 15/17] mtd: spianand: winbond: Add change_mode() manufacturer_ops
Date: Mon, 3 Jan 2022 11:27:05 +0100 [thread overview]
Message-ID: <20220103112705.718c580c@collabora.com> (raw)
In-Reply-To: <20220101074250.14443-16-a-nandan@ti.com>
On Sat, 1 Jan 2022 13:12:48 +0530
Apurva Nandan <a-nandan@ti.com> wrote:
> Add implementation of change_mode() for Winbond's manufacturer_ops,
> that executes octal_dtr_enable() and octal_dtr_disable() according
> to requested protocol.
>
> Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf
>
> Signed-off-by: Apurva Nandan <a-nandan@ti.com>
> ---
> drivers/mtd/nand/spi/winbond.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
> index c7478faf6cee..d8eccb40c80f 100644
> --- a/drivers/mtd/nand/spi/winbond.c
> +++ b/drivers/mtd/nand/spi/winbond.c
> @@ -242,8 +242,33 @@ static int winbond_spinand_octal_dtr_disable(struct spinand_device *spinand)
> return 0;
> }
>
> +static int winbond_change_spi_mode(struct spinand_device *spinand,
> + const enum spinand_protocol protocol)
> +{
> + if (spinand->protocol == protocol)
> + return 0;
> +
> + switch (spinand->protocol) {
> + case SPINAND_1S_1S_1S:
> + if (protocol == SPINAND_8D_8D_8D)
> + return winbond_spinand_octal_dtr_enable(spinand);
> + break;
> +
> + case SPINAND_8D_8D_8D:
> + if (protocol == SPINAND_1S_1S_1S)
> + return winbond_spinand_octal_dtr_disable(spinand);
> + break;
> +
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return -EOPNOTSUPP;
This version is slightly more concise:
if (spinand->protocol == protocol)
return 0;
else if (spinand->protocol == SPINAND_1S && protocol == SPINAND_8D)
return winbond_spinand_octal_dtr_enable(spinand);
else if (spinand->protocol == SPINAND_8D && protocol == SPINAND_1S)
return winbond_spinand_octal_dtr_disable(spinand);
return -EOPNOTSUPP;
> +}
> +
> static const struct spinand_manufacturer_ops winbond_spinand_manuf_ops = {
> .init = winbond_spinand_init,
> + .change_mode = winbond_change_spi_mode,
> };
>
> const struct spinand_manufacturer winbond_spinand_manufacturer = {
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Boris Brezillon <boris.brezillon@collabora.com>
To: Apurva Nandan <a-nandan@ti.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Mark Brown <broonie@kernel.org>,
Patrice Chotard <patrice.chotard@foss.st.com>,
Christophe Kerello <christophe.kerello@foss.st.com>,
Daniel Palmer <daniel@0x0f.com>,
Alexander Lobakin <alobakin@pm.me>,
<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<linux-spi@vger.kernel.org>, <p.yadav@ti.com>
Subject: Re: [PATCH v3 15/17] mtd: spianand: winbond: Add change_mode() manufacturer_ops
Date: Mon, 3 Jan 2022 11:27:05 +0100 [thread overview]
Message-ID: <20220103112705.718c580c@collabora.com> (raw)
In-Reply-To: <20220101074250.14443-16-a-nandan@ti.com>
On Sat, 1 Jan 2022 13:12:48 +0530
Apurva Nandan <a-nandan@ti.com> wrote:
> Add implementation of change_mode() for Winbond's manufacturer_ops,
> that executes octal_dtr_enable() and octal_dtr_disable() according
> to requested protocol.
>
> Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf
>
> Signed-off-by: Apurva Nandan <a-nandan@ti.com>
> ---
> drivers/mtd/nand/spi/winbond.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
> index c7478faf6cee..d8eccb40c80f 100644
> --- a/drivers/mtd/nand/spi/winbond.c
> +++ b/drivers/mtd/nand/spi/winbond.c
> @@ -242,8 +242,33 @@ static int winbond_spinand_octal_dtr_disable(struct spinand_device *spinand)
> return 0;
> }
>
> +static int winbond_change_spi_mode(struct spinand_device *spinand,
> + const enum spinand_protocol protocol)
> +{
> + if (spinand->protocol == protocol)
> + return 0;
> +
> + switch (spinand->protocol) {
> + case SPINAND_1S_1S_1S:
> + if (protocol == SPINAND_8D_8D_8D)
> + return winbond_spinand_octal_dtr_enable(spinand);
> + break;
> +
> + case SPINAND_8D_8D_8D:
> + if (protocol == SPINAND_1S_1S_1S)
> + return winbond_spinand_octal_dtr_disable(spinand);
> + break;
> +
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return -EOPNOTSUPP;
This version is slightly more concise:
if (spinand->protocol == protocol)
return 0;
else if (spinand->protocol == SPINAND_1S && protocol == SPINAND_8D)
return winbond_spinand_octal_dtr_enable(spinand);
else if (spinand->protocol == SPINAND_8D && protocol == SPINAND_1S)
return winbond_spinand_octal_dtr_disable(spinand);
return -EOPNOTSUPP;
> +}
> +
> static const struct spinand_manufacturer_ops winbond_spinand_manuf_ops = {
> .init = winbond_spinand_init,
> + .change_mode = winbond_change_spi_mode,
> };
>
> const struct spinand_manufacturer winbond_spinand_manufacturer = {
next prev parent reply other threads:[~2022-01-03 10:27 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-01 7:42 [PATCH v3 00/17] mtd: spinand: Add Octal DTR SPI (8D-8D-8D) mode support Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-01 7:42 ` [PATCH v3 01/17] spi: spi-mem: Add DTR templates for cmd, address, dummy and data phase Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-04 14:52 ` Mark Brown
2022-01-04 14:52 ` Mark Brown
2022-01-04 15:31 ` Boris Brezillon
2022-01-04 15:31 ` Boris Brezillon
2022-01-05 5:50 ` Pratyush Yadav
2022-01-05 5:50 ` Pratyush Yadav
2022-01-05 7:36 ` Boris Brezillon
2022-01-05 7:36 ` Boris Brezillon
2022-01-05 8:24 ` Tudor.Ambarus
2022-01-05 8:24 ` Tudor.Ambarus
2022-01-01 7:42 ` [PATCH v3 02/17] mtd: spinand: Define macros for Octal DTR ops Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-01 7:42 ` [PATCH v3 03/17] mtd: spinand: Add enum spinand_protocol to indicate current SPI IO mode Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-03 10:05 ` Boris Brezillon
2022-01-03 10:05 ` Boris Brezillon
2022-01-01 7:42 ` [PATCH v3 04/17] mtd: spinand: Rename 'op_templates' to 'data_ops' Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-03 9:48 ` Boris Brezillon
2022-01-03 9:48 ` Boris Brezillon
2022-01-01 7:42 ` [PATCH v3 05/17] mtd: spinand: Define ctrl_ops for non-page read/write op templates Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-03 10:01 ` Boris Brezillon
2022-01-03 10:01 ` Boris Brezillon
2022-01-03 10:36 ` Boris Brezillon
2022-01-03 10:36 ` Boris Brezillon
2022-02-15 15:33 ` Apurva Nandan
2022-02-15 15:33 ` Apurva Nandan
2022-02-15 17:37 ` Boris Brezillon
2022-02-15 17:37 ` Boris Brezillon
2022-03-02 15:30 ` Apurva Nandan
2022-03-02 15:30 ` Apurva Nandan
2022-03-02 20:05 ` Boris Brezillon
2022-03-02 20:05 ` Boris Brezillon
2022-03-10 7:57 ` Apurva Nandan
2022-03-10 7:57 ` Apurva Nandan
2022-03-10 8:40 ` Boris Brezillon
2022-03-10 8:40 ` Boris Brezillon
2022-03-14 11:47 ` Apurva Nandan
2022-03-14 11:47 ` Apurva Nandan
2022-01-01 7:42 ` [PATCH v3 06/17] mtd: spinand: Define default ctrl_ops in the core Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-01 7:42 ` [PATCH v3 07/17] mtd: spinand: Switch from op macros usage to 'ctrl_ops' " Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-01 7:42 ` [PATCH v3 08/17] mtd: spinand: Add support for manufacturer-based ctrl_ops variations Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-01 7:42 ` [PATCH v3 09/17] mtd: spinand: Add change_mode() in manufacturer_ops Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-05 9:52 ` Boris Brezillon
2022-01-05 9:52 ` Boris Brezillon
2022-01-01 7:42 ` [PATCH v3 10/17] mtd: spinand: Add pointer to probed flash's spinand_info Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-01 7:42 ` [PATCH v3 11/17] mtd: spinand: Allow enabling/disabling Octal DTR mode in the core Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-03 10:14 ` Boris Brezillon
2022-01-03 10:14 ` Boris Brezillon
2022-01-01 7:42 ` [PATCH v3 12/17] mtd: spinand: Add mtd_suspend() to disable Octal DTR mode at suspend Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-03 10:17 ` Boris Brezillon
2022-01-03 10:17 ` Boris Brezillon
2022-01-01 7:42 ` [PATCH v3 13/17] mtd: spinand: winbond: Add support for write volatile configuration register op Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-01 7:42 ` [PATCH v3 14/17] mtd: spinand: winbond: Add octal_dtr_enable/disable() in manufacturer_ops Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-01 7:42 ` [PATCH v3 15/17] mtd: spianand: winbond: Add change_mode() manufacturer_ops Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-03 10:27 ` Boris Brezillon [this message]
2022-01-03 10:27 ` Boris Brezillon
2022-01-01 7:42 ` [PATCH v3 16/17] mtd: spinand: winbond: Rename cache op_variants struct variable Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
2022-01-01 7:42 ` [PATCH v3 17/17] mtd: spinand: winbond: Add support for Winbond W35N01JW SPI NAND flash Apurva Nandan
2022-01-01 7:42 ` Apurva Nandan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220103112705.718c580c@collabora.com \
--to=boris.brezillon@collabora.com \
--cc=a-nandan@ti.com \
--cc=alobakin@pm.me \
--cc=broonie@kernel.org \
--cc=christophe.kerello@foss.st.com \
--cc=daniel@0x0f.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=p.yadav@ti.com \
--cc=patrice.chotard@foss.st.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.