From: Aswath Govindraju <a-govindraju@ti.com>
Cc: <u-boot@lists.denx.de>, Wolfgang Denk <wd@denx.de>,
Hari Nagalla <hnagalla@ti.com>, David Huang <d-huang@ti.com>,
Keerthy <j-keerthy@ti.com>, Dave Gerlach <d-gerlach@ti.com>,
Suman Anna <s-anna@ti.com>, Nishanth Menon <nm@ti.com>,
Tero Kristo <kristo@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Christian Hewitt <christianshewitt@gmail.com>,
Tim Harvey <tharvey@gateworks.com>,
Peter Robinson <pbrobinson@gmail.com>,
Kever Yang <kever.yang@rock-chips.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Fabio Estevam <festevam@denx.de>,
Andre Przywara <andre.przywara@arm.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Sean Anderson <seanga2@gmail.com>,
Lukasz Majewski <lukma@denx.de>,
Aswath Govindraju <a-govindraju@ti.com>
Subject: [PATCH v2 00/20] J721S2: Add initial support
Date: Tue, 11 Jan 2022 13:25:25 +0530 [thread overview]
Message-ID: <20220111075545.1880-1-a-govindraju@ti.com> (raw)
The J721S2 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration in automotive ADAS applications and
industrial applications requiring AI at the network edge. This SoC extends
the Jacinto 7 family of SoCs with focus on lowering system costs and power
while providing interfaces, memory architecture and compute performance for
single and multi-sensor applications.
Some highlights of this SoC are:
* Dual Cortex-A72s in a single cluster, three clusters of lockstep capable
dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x
floating point Vector DSP.
* 3D GPU: Automotive grade IMG BXS-4-64
* Vision Processing Accelerator (VPAC) with image signal processor and
Depth and Motion Processing Accelerator (DMPAC)
* Two CSI2.0 4L RX plus one eDP/DP, two DSI Tx, and one DPI interface.
* Two Ethernet ports with RGMII support.
* Single 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role device subsystems,
* Up to 20 MCANs, 5 McASP, eMMC and SD, OSPI/HyperBus memory controller,
QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals.
* Hardware accelerator blocks containing AES/DES/SHA/MD5 called SA2UL
management.
* Chips and Media Wave521CL H.264/H.265 encode/decode engine
See J721S2 Technical Reference Manual (SPRUJ28 – NOVEMBER 2021)
for further details: http://www.ti.com/lit/pdf/spruj28
bootlog:
- https://pastebin.ubuntu.com/p/WDpTxGHcGD/
Changes since v1:
- Removed unused serial aliases
- Assigned serial2 alias for main uart8 instance
- Moved aliases to respective board files
Aswath Govindraju (10):
ram: k3-ddrss: lpddr4_structs_if.h: Add a pointer to ddr instance
ram: k3-ddrss: Add support for multiple instances of DDR subsystems
ram: k3-ddrss: Add support for configuring MSMC subsystem in case of
Multiple DDR subsystems
dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2
arm: dts: Add initial support for J721S2 SoC
arm: dts: Add initial support for J721S2 System on Module
arm: dts: Add support for A72 specific J721S2 Common Processor Board
arm: dts: k3-j721s2: Add r5 specific dt support
arm: dts: k3-j721s2-ddr: Add DDR support
David Huang (9):
arm: K3: Add basic support for J721S2 SoC definition
drivers: dma: Add support for J721S2
clk: clk-k3: Add support for J721S2 SoC
power: domain: ti: Add support for J721S2 SoC
ram: k3-ddrss: Add support for J721S2 SoC
soc: ti: k3-socinfo: Add entry for J721S2 SoC
board: ti: j721s2: Add board support for J721S2
configs: j721s2_evm_r5_defconfig: Add R5 SPL specific defconfig
configs: j721s2_evm_a72_defconfig: Add A72 specific defconfig
Nishanth Menon (1):
remoteproc: k3_system_controller: Support optional boot_notification
channel
arch/arm/dts/Makefile | 2 +
.../k3-j721s2-common-proc-board-u-boot.dtsi | 149 +
arch/arm/dts/k3-j721s2-common-proc-board.dts | 430 ++
arch/arm/dts/k3-j721s2-ddr-evm-lp4-4266.dtsi | 4387 ++++++++++++++++
arch/arm/dts/k3-j721s2-ddr.dtsi | 4440 +++++++++++++++++
arch/arm/dts/k3-j721s2-main.dtsi | 937 ++++
arch/arm/dts/k3-j721s2-mcu-wakeup.dtsi | 302 ++
.../dts/k3-j721s2-r5-common-proc-board.dts | 198 +
arch/arm/dts/k3-j721s2-som-p0.dtsi | 173 +
arch/arm/dts/k3-j721s2.dtsi | 167 +
arch/arm/mach-k3/Kconfig | 11 +-
arch/arm/mach-k3/Makefile | 1 +
arch/arm/mach-k3/arm64-mmu.c | 53 +
arch/arm/mach-k3/include/mach/hardware.h | 4 +
.../mach-k3/include/mach/j721s2_hardware.h | 60 +
arch/arm/mach-k3/include/mach/j721s2_spl.h | 46 +
arch/arm/mach-k3/include/mach/spl.h | 4 +
arch/arm/mach-k3/j721s2/Makefile | 5 +
arch/arm/mach-k3/j721s2/clk-data.c | 403 ++
arch/arm/mach-k3/j721s2/dev-data.c | 85 +
arch/arm/mach-k3/j721s2_init.c | 312 ++
board/ti/j721s2/Kconfig | 63 +
board/ti/j721s2/MAINTAINERS | 7 +
board/ti/j721s2/Makefile | 8 +
board/ti/j721s2/evm.c | 180 +
configs/j721s2_evm_a72_defconfig | 207 +
configs/j721s2_evm_r5_defconfig | 171 +
.../remoteproc/k3-system-controller.txt | 3 +
drivers/clk/ti/clk-k3.c | 5 +
drivers/dma/ti/Makefile | 1 +
drivers/dma/ti/k3-psil-j721s2.c | 167 +
drivers/dma/ti/k3-psil-priv.h | 1 +
drivers/dma/ti/k3-psil.c | 2 +
drivers/firmware/ti_sci_static_data.h | 40 +-
drivers/power/domain/ti-power-domain.c | 5 +
drivers/ram/Kconfig | 12 +
drivers/ram/k3-ddrss/Makefile | 4 +
drivers/ram/k3-ddrss/k3-ddrss.c | 296 +-
drivers/ram/k3-ddrss/lpddr4_structs_if.h | 1 +
drivers/remoteproc/k3_system_controller.c | 20 +-
drivers/soc/soc_ti_k3.c | 4 +
include/configs/j721s2_evm.h | 191 +
include/dt-bindings/mux/ti-serdes.h | 22 +
include/dt-bindings/pinctrl/k3.h | 3 +
include/k3-clk.h | 1 +
include/k3-dev.h | 1 +
46 files changed, 13528 insertions(+), 56 deletions(-)
create mode 100644 arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi
create mode 100644 arch/arm/dts/k3-j721s2-common-proc-board.dts
create mode 100644 arch/arm/dts/k3-j721s2-ddr-evm-lp4-4266.dtsi
create mode 100644 arch/arm/dts/k3-j721s2-ddr.dtsi
create mode 100644 arch/arm/dts/k3-j721s2-main.dtsi
create mode 100644 arch/arm/dts/k3-j721s2-mcu-wakeup.dtsi
create mode 100644 arch/arm/dts/k3-j721s2-r5-common-proc-board.dts
create mode 100644 arch/arm/dts/k3-j721s2-som-p0.dtsi
create mode 100644 arch/arm/dts/k3-j721s2.dtsi
create mode 100644 arch/arm/mach-k3/include/mach/j721s2_hardware.h
create mode 100644 arch/arm/mach-k3/include/mach/j721s2_spl.h
create mode 100644 arch/arm/mach-k3/j721s2/Makefile
create mode 100644 arch/arm/mach-k3/j721s2/clk-data.c
create mode 100644 arch/arm/mach-k3/j721s2/dev-data.c
create mode 100644 arch/arm/mach-k3/j721s2_init.c
create mode 100644 board/ti/j721s2/Kconfig
create mode 100644 board/ti/j721s2/MAINTAINERS
create mode 100644 board/ti/j721s2/Makefile
create mode 100644 board/ti/j721s2/evm.c
create mode 100644 configs/j721s2_evm_a72_defconfig
create mode 100644 configs/j721s2_evm_r5_defconfig
create mode 100644 drivers/dma/ti/k3-psil-j721s2.c
create mode 100644 include/configs/j721s2_evm.h
--
2.17.1
next reply other threads:[~2022-01-11 7:56 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-11 7:55 Aswath Govindraju [this message]
2022-01-11 7:55 ` [PATCH v2 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel Aswath Govindraju
2022-01-13 14:12 ` Tom Rini
2022-01-17 5:31 ` Aswath Govindraju
2022-01-17 6:52 ` Aswath Govindraju
2022-01-17 13:54 ` Tom Rini
2022-01-18 5:56 ` Aswath Govindraju
2022-01-18 12:50 ` Tom Rini
2022-01-18 13:50 ` Nishanth Menon
2022-01-18 14:17 ` Tom Rini
2022-01-11 7:55 ` [PATCH v2 02/20] ram: k3-ddrss: lpddr4_structs_if.h: Add a pointer to ddr instance Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 03/20] ram: k3-ddrss: Add support for multiple instances of DDR subsystems Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 04/20] ram: k3-ddrss: Add support for configuring MSMC subsystem in case of Multiple " Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 05/20] arm: K3: Add basic support for J721S2 SoC definition Aswath Govindraju
2022-01-13 14:13 ` Tom Rini
2022-01-11 7:55 ` [PATCH v2 06/20] drivers: dma: Add support for J721S2 Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 07/20] clk: clk-k3: Add support for J721S2 SoC Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 08/20] power: domain: ti: " Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 09/20] ram: k3-ddrss: " Aswath Govindraju
2022-01-13 14:15 ` Tom Rini
2022-01-17 6:31 ` Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 10/20] soc: ti: k3-socinfo: Add entry " Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 11/20] board: ti: j721s2: Add board support for J721S2 Aswath Govindraju
2022-01-13 14:16 ` Tom Rini
2022-01-17 6:42 ` Aswath Govindraju
2022-01-17 13:54 ` Tom Rini
2022-01-11 7:55 ` [PATCH v2 12/20] dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC Aswath Govindraju
2022-01-13 14:17 ` Tom Rini
2022-01-17 5:41 ` Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 13/20] dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2 Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 14/20] arm: dts: Add initial support for J721S2 SoC Aswath Govindraju
2022-01-13 14:08 ` Tom Rini
2022-01-13 14:16 ` Aswath Govindraju
2022-01-13 14:23 ` Tom Rini
2022-01-11 7:55 ` [PATCH v2 15/20] arm: dts: Add initial support for J721S2 System on Module Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 16/20] arm: dts: Add support for A72 specific J721S2 Common Processor Board Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 17/20] arm: dts: k3-j721s2: Add r5 specific dt support Aswath Govindraju
2022-01-13 14:11 ` Tom Rini
2022-01-11 7:55 ` [PATCH v2 18/20] arm: dts: k3-j721s2-ddr: Add DDR support Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 19/20] configs: j721s2_evm_r5_defconfig: Add R5 SPL specific defconfig Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 20/20] configs: j721s2_evm_a72_defconfig: Add A72 " Aswath Govindraju
2022-01-18 7:30 ` [PATCH v2 00/20] J721S2: Add initial support Aswath Govindraju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220111075545.1880-1-a-govindraju@ti.com \
--to=a-govindraju@ti.com \
--cc=andre.przywara@arm.com \
--cc=christianshewitt@gmail.com \
--cc=d-gerlach@ti.com \
--cc=d-huang@ti.com \
--cc=festevam@denx.de \
--cc=hnagalla@ti.com \
--cc=j-keerthy@ti.com \
--cc=jh80.chung@samsung.com \
--cc=kever.yang@rock-chips.com \
--cc=kishon@ti.com \
--cc=kristo@kernel.org \
--cc=lukma@denx.de \
--cc=narmstrong@baylibre.com \
--cc=nm@ti.com \
--cc=pbrobinson@gmail.com \
--cc=s-anna@ti.com \
--cc=seanga2@gmail.com \
--cc=tharvey@gateworks.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.