From: Aswath Govindraju <a-govindraju@ti.com>
Cc: <u-boot@lists.denx.de>, Wolfgang Denk <wd@denx.de>,
Hari Nagalla <hnagalla@ti.com>, David Huang <d-huang@ti.com>,
Keerthy <j-keerthy@ti.com>, Dave Gerlach <d-gerlach@ti.com>,
Suman Anna <s-anna@ti.com>, Nishanth Menon <nm@ti.com>,
Tero Kristo <kristo@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Christian Hewitt <christianshewitt@gmail.com>,
Tim Harvey <tharvey@gateworks.com>,
Peter Robinson <pbrobinson@gmail.com>,
Kever Yang <kever.yang@rock-chips.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Fabio Estevam <festevam@denx.de>,
Andre Przywara <andre.przywara@arm.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Sean Anderson <seanga2@gmail.com>,
Lukasz Majewski <lukma@denx.de>,
Aswath Govindraju <a-govindraju@ti.com>
Subject: [PATCH v2 19/20] configs: j721s2_evm_r5_defconfig: Add R5 SPL specific defconfig
Date: Tue, 11 Jan 2022 13:25:44 +0530 [thread overview]
Message-ID: <20220111075545.1880-20-a-govindraju@ti.com> (raw)
In-Reply-To: <20220111075545.1880-1-a-govindraju@ti.com>
From: David Huang <d-huang@ti.com>
Enable R5 SPL specific configs for J721S2.
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
---
configs/j721s2_evm_r5_defconfig | 171 ++++++++++++++++++++++++++++++++
1 file changed, 171 insertions(+)
create mode 100644 configs/j721s2_evm_r5_defconfig
diff --git a/configs/j721s2_evm_r5_defconfig b/configs/j721s2_evm_r5_defconfig
new file mode 100644
index 000000000000..4ecab605357c
--- /dev/null
+++ b/configs/j721s2_evm_r5_defconfig
@@ -0,0 +1,171 @@
+CONFIG_PANIC_HANG=y
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x10000
+CONFIG_SOC_K3_J721S2=y
+CONFIG_K3_EARLY_CONS=y
+CONFIG_TARGET_J721S2_R5_EVM=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_DM_SPI=y
+CONFIG_SPL_TEXT_BASE=0x41c00000
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-j721s2-r5-common-proc-board"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_USE_BOOTCOMMAND=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_EARLY_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
+CONFIG_SPL_DMA=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_NOR_SUPPORT=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_REMOTEPROC=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_THERMAL=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_REMOTEPROC=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+# CONFIG_CLK_TI_SCI is not set
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
+CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_OMAP24XX=y
+CONFIG_DM_MAILBOX=y
+CONFIG_K3_SEC_PROXY=y
+CONFIG_FS_LOADER=y
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_SPL_MMC_SDHCI_ADMA=y
+CONFIG_MMC_SDHCI_AM654=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_SOFT_RESET=y
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_S28HS512T=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MT35XU=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_POWER_DOMAIN=y
+# CONFIG_TI_SCI_POWER_DOMAIN is not set
+CONFIG_K3_SYSTEM_CONTROLLER=y
+CONFIG_REMOTEPROC_TI_K3_ARM64=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_TI_SCI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SOC_DEVICE=y
+CONFIG_SOC_DEVICE_TI_K3=y
+CONFIG_SOC_TI=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_CADENCE_QSPI_PHY=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_TI_SCI=y
+CONFIG_DM_THERMAL=y
+CONFIG_TIMER=y
+CONFIG_SPL_TIMER=y
+CONFIG_OMAP_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_SPL_USB_CDNS3_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0x6168
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
+CONFIG_TI_POWER_DOMAIN=y
+CONFIG_SPL_CLK_CCF=y
+CONFIG_LIB_RATIONAL=y
+CONFIG_SPL_LIB_RATIONAL=y
+CONFIG_SPL_CLK_K3_PLL=y
+CONFIG_SPL_CLK_K3=y
+CONFIG_K3_DM_FW=y
+CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+CONFIG_OF_LIBFDT=y
+CONFIG_SPL_DM_GPIO=y
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
+CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
+CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
+CONFIG_SPL_SIZE_LIMIT=0x80000
+CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
--
2.17.1
next prev parent reply other threads:[~2022-01-11 7:59 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-11 7:55 [PATCH v2 00/20] J721S2: Add initial support Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel Aswath Govindraju
2022-01-13 14:12 ` Tom Rini
2022-01-17 5:31 ` Aswath Govindraju
2022-01-17 6:52 ` Aswath Govindraju
2022-01-17 13:54 ` Tom Rini
2022-01-18 5:56 ` Aswath Govindraju
2022-01-18 12:50 ` Tom Rini
2022-01-18 13:50 ` Nishanth Menon
2022-01-18 14:17 ` Tom Rini
2022-01-11 7:55 ` [PATCH v2 02/20] ram: k3-ddrss: lpddr4_structs_if.h: Add a pointer to ddr instance Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 03/20] ram: k3-ddrss: Add support for multiple instances of DDR subsystems Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 04/20] ram: k3-ddrss: Add support for configuring MSMC subsystem in case of Multiple " Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 05/20] arm: K3: Add basic support for J721S2 SoC definition Aswath Govindraju
2022-01-13 14:13 ` Tom Rini
2022-01-11 7:55 ` [PATCH v2 06/20] drivers: dma: Add support for J721S2 Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 07/20] clk: clk-k3: Add support for J721S2 SoC Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 08/20] power: domain: ti: " Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 09/20] ram: k3-ddrss: " Aswath Govindraju
2022-01-13 14:15 ` Tom Rini
2022-01-17 6:31 ` Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 10/20] soc: ti: k3-socinfo: Add entry " Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 11/20] board: ti: j721s2: Add board support for J721S2 Aswath Govindraju
2022-01-13 14:16 ` Tom Rini
2022-01-17 6:42 ` Aswath Govindraju
2022-01-17 13:54 ` Tom Rini
2022-01-11 7:55 ` [PATCH v2 12/20] dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC Aswath Govindraju
2022-01-13 14:17 ` Tom Rini
2022-01-17 5:41 ` Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 13/20] dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2 Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 14/20] arm: dts: Add initial support for J721S2 SoC Aswath Govindraju
2022-01-13 14:08 ` Tom Rini
2022-01-13 14:16 ` Aswath Govindraju
2022-01-13 14:23 ` Tom Rini
2022-01-11 7:55 ` [PATCH v2 15/20] arm: dts: Add initial support for J721S2 System on Module Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 16/20] arm: dts: Add support for A72 specific J721S2 Common Processor Board Aswath Govindraju
2022-01-11 7:55 ` [PATCH v2 17/20] arm: dts: k3-j721s2: Add r5 specific dt support Aswath Govindraju
2022-01-13 14:11 ` Tom Rini
2022-01-11 7:55 ` [PATCH v2 18/20] arm: dts: k3-j721s2-ddr: Add DDR support Aswath Govindraju
2022-01-11 7:55 ` Aswath Govindraju [this message]
2022-01-11 7:55 ` [PATCH v2 20/20] configs: j721s2_evm_a72_defconfig: Add A72 specific defconfig Aswath Govindraju
2022-01-18 7:30 ` [PATCH v2 00/20] J721S2: Add initial support Aswath Govindraju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220111075545.1880-20-a-govindraju@ti.com \
--to=a-govindraju@ti.com \
--cc=andre.przywara@arm.com \
--cc=christianshewitt@gmail.com \
--cc=d-gerlach@ti.com \
--cc=d-huang@ti.com \
--cc=festevam@denx.de \
--cc=hnagalla@ti.com \
--cc=j-keerthy@ti.com \
--cc=jh80.chung@samsung.com \
--cc=kever.yang@rock-chips.com \
--cc=kishon@ti.com \
--cc=kristo@kernel.org \
--cc=lukma@denx.de \
--cc=narmstrong@baylibre.com \
--cc=nm@ti.com \
--cc=pbrobinson@gmail.com \
--cc=s-anna@ti.com \
--cc=seanga2@gmail.com \
--cc=tharvey@gateworks.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.