[PATCH] net: dsa|ethernet: use bool values to pass bool param of phy_init_eee

From: Jisheng Zhang <jszhang@kernel.org>
To: Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Sean Wang <sean.wang@mediatek.com>,
	Landen Chao <Landen.Chao@mediatek.com>,
	DENG Qingfang <dqfext@gmail.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Doug Berger <opendmb@gmail.com>,
	Joakim Zhang <qiangqing.zhang@nxp.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Bryan Whitehead <bryan.whitehead@microchip.com>,
	UNGLinuxDriver@microchip.com, Byungho An <bh74.an@samsung.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com
Subject: [PATCH] net: dsa|ethernet: use bool values to pass bool param of phy_init_eee
Date: Sun, 23 Jan 2022 23:22:41 +0800	[thread overview]
Message-ID: <20220123152241.1480-1-jszhang@kernel.org> (raw)

The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use
true or false instead of 1/0.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
 drivers/net/dsa/b53/b53_common.c                 | 2 +-
 drivers/net/dsa/mt7530.c                         | 2 +-
 drivers/net/ethernet/broadcom/genet/bcmgenet.c   | 2 +-
 drivers/net/ethernet/freescale/fec_main.c        | 2 +-
 drivers/net/ethernet/marvell/mvneta.c            | 2 +-
 drivers/net/ethernet/microchip/lan743x_ethtool.c | 2 +-
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c  | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 3867f3d4545f..a3b98992f180 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2186,7 +2186,7 @@ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
 	int ret;
 
-	ret = phy_init_eee(phy, 0);
+	ret = phy_init_eee(phy, false);
 	if (ret)
 		return 0;
 
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index b82512e5b33b..bc77a26c825a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2846,7 +2846,7 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
 			mcr |= PMCR_RX_FC_EN;
 	}
 
-	if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, 0) >= 0) {
+	if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
 		switch (speed) {
 		case SPEED_1000:
 			mcr |= PMCR_FORCE_EEE1G;
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 87f1056e29ff..cfe09117fe6c 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1368,7 +1368,7 @@ static int bcmgenet_set_eee(struct net_device *dev, struct ethtool_eee *e)
 	if (!p->eee_enabled) {
 		bcmgenet_eee_enable_set(dev, false);
 	} else {
-		ret = phy_init_eee(dev->phydev, 0);
+		ret = phy_init_eee(dev->phydev, false);
 		if (ret) {
 			netif_err(priv, hw, dev, "EEE initialization failed\n");
 			return ret;
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 796133de527e..11227f51404c 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2797,7 +2797,7 @@ static int fec_enet_eee_mode_set(struct net_device *ndev, bool enable)
 	int ret = 0;
 
 	if (enable) {
-		ret = phy_init_eee(ndev->phydev, 0);
+		ret = phy_init_eee(ndev->phydev, false);
 		if (ret)
 			return ret;
 
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 83c8908f0cc7..7f44b73024a0 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4169,7 +4169,7 @@ static void mvneta_mac_link_up(struct phylink_config *config,
 	mvneta_port_up(pp);
 
 	if (phy && pp->eee_enabled) {
-		pp->eee_active = phy_init_eee(phy, 0) >= 0;
+		pp->eee_active = phy_init_eee(phy, false) >= 0;
 		mvneta_set_eee(pp, pp->eee_active && pp->tx_lpi_enabled);
 	}
 }
diff --git a/drivers/net/ethernet/microchip/lan743x_ethtool.c b/drivers/net/ethernet/microchip/lan743x_ethtool.c
index 91a755efe2e6..5f1e7b8bad4f 100644
--- a/drivers/net/ethernet/microchip/lan743x_ethtool.c
+++ b/drivers/net/ethernet/microchip/lan743x_ethtool.c
@@ -750,7 +750,7 @@ static int lan743x_ethtool_set_eee(struct net_device *netdev,
 	}
 
 	if (eee->eee_enabled) {
-		ret = phy_init_eee(phydev, 0);
+		ret = phy_init_eee(phydev, false);
 		if (ret) {
 			netif_err(adapter, drv, adapter->netdev,
 				  "EEE initialization failed\n");
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index 32161a56726c..77a0d9d7e65a 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -127,7 +127,7 @@ bool sxgbe_eee_init(struct sxgbe_priv_data * const priv)
 	/* MAC core supports the EEE feature. */
 	if (priv->hw_cap.eee) {
 		/* Check if the PHY supports EEE */
-		if (phy_init_eee(ndev->phydev, 1))
+		if (phy_init_eee(ndev->phydev, true))
 			return false;
 
 		priv->eee_active = 1;
-- 
2.34.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
