All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Geis <pgwipeout@gmail.com>
Cc: Peter Geis <pgwipeout@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Heiko Stuebner <heiko@sntech.de>, Felipe Balbi <balbi@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org
Subject: [PATCH v1 0/8] enable usb support on rk356x
Date: Fri, 25 Feb 2022 09:54:23 -0500	[thread overview]
Message-ID: <20220225145432.422130-1-pgwipeout@gmail.com> (raw)

Good Morning,

This is my patch series that I have maintained out of tree until the
combophy driver landed. Note, it is dependent on this series to function
(aside from the rk3566 dwc3-otg port, which will work currently).

This series is still dependent on Patch 4 of the combophy series, which
has yet to be accepted.

Patches 1 and 2 add the dt bindings for the grf changes necessary for
this series.
Patch 3 adds support to the grf driver to set the rk3566 otg clock
source.
Patch 4 is a downstream patch ported forward to shut down the usb3 clock
when the controller is operating in usb2 mode.
Patches 5 and 6 clean up the dwc3-of-simple driver and add the
compatible for the rk3568.
Patch 7 adds the dwc3 nodes to the rk356x device tree includes.
Patch 8 enables the dwc3 nodes on the Quartz64 Model A.

Please review and apply.

Very Respectfully,
Peter Geis

Bin Yang (1):
  usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode

Peter Geis (7):
  dt-bindings: soc: grf: add rk3566-pipe-grf compatible
  dt-bindings: usb: dwc3: add description for rk3568
  soc: rockchip: set dwc3 clock for rk3566
  usb: dwc3: reorder dwc-of-simple compatibles
  usb: dwc3: add rk3568 dwc3 support
  arm64: dts: rockchip: add the dwc3 usb3 nodes to rk356x
  arm64: dts: rockchip: enable the dwc3 nodes on quartz64-a

 .../devicetree/bindings/soc/rockchip/grf.yaml |  1 +
 .../bindings/usb/rockchip,dwc3.yaml           |  7 ++-
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 37 +++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3566.dtsi      | 12 +++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      |  9 ++++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 45 ++++++++++++++++++-
 drivers/soc/rockchip/grf.c                    | 17 +++++++
 drivers/usb/dwc3/core.c                       |  4 ++
 drivers/usb/dwc3/core.h                       |  1 +
 drivers/usb/dwc3/dwc3-of-simple.c             | 10 +++--
 10 files changed, 137 insertions(+), 6 deletions(-)

-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Peter Geis <pgwipeout@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Peter Geis <pgwipeout@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Heiko Stuebner <heiko@sntech.de>, Felipe Balbi <balbi@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org
Subject: [PATCH v1 0/8] enable usb support on rk356x
Date: Fri, 25 Feb 2022 09:54:23 -0500	[thread overview]
Message-ID: <20220225145432.422130-1-pgwipeout@gmail.com> (raw)

Good Morning,

This is my patch series that I have maintained out of tree until the
combophy driver landed. Note, it is dependent on this series to function
(aside from the rk3566 dwc3-otg port, which will work currently).

This series is still dependent on Patch 4 of the combophy series, which
has yet to be accepted.

Patches 1 and 2 add the dt bindings for the grf changes necessary for
this series.
Patch 3 adds support to the grf driver to set the rk3566 otg clock
source.
Patch 4 is a downstream patch ported forward to shut down the usb3 clock
when the controller is operating in usb2 mode.
Patches 5 and 6 clean up the dwc3-of-simple driver and add the
compatible for the rk3568.
Patch 7 adds the dwc3 nodes to the rk356x device tree includes.
Patch 8 enables the dwc3 nodes on the Quartz64 Model A.

Please review and apply.

Very Respectfully,
Peter Geis

Bin Yang (1):
  usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode

Peter Geis (7):
  dt-bindings: soc: grf: add rk3566-pipe-grf compatible
  dt-bindings: usb: dwc3: add description for rk3568
  soc: rockchip: set dwc3 clock for rk3566
  usb: dwc3: reorder dwc-of-simple compatibles
  usb: dwc3: add rk3568 dwc3 support
  arm64: dts: rockchip: add the dwc3 usb3 nodes to rk356x
  arm64: dts: rockchip: enable the dwc3 nodes on quartz64-a

 .../devicetree/bindings/soc/rockchip/grf.yaml |  1 +
 .../bindings/usb/rockchip,dwc3.yaml           |  7 ++-
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 37 +++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3566.dtsi      | 12 +++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      |  9 ++++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 45 ++++++++++++++++++-
 drivers/soc/rockchip/grf.c                    | 17 +++++++
 drivers/usb/dwc3/core.c                       |  4 ++
 drivers/usb/dwc3/core.h                       |  1 +
 drivers/usb/dwc3/dwc3-of-simple.c             | 10 +++--
 10 files changed, 137 insertions(+), 6 deletions(-)

-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Peter Geis <pgwipeout@gmail.com>
Cc: Peter Geis <pgwipeout@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Heiko Stuebner <heiko@sntech.de>, Felipe Balbi <balbi@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org
Subject: [PATCH v1 0/8] enable usb support on rk356x
Date: Fri, 25 Feb 2022 09:54:23 -0500	[thread overview]
Message-ID: <20220225145432.422130-1-pgwipeout@gmail.com> (raw)

Good Morning,

This is my patch series that I have maintained out of tree until the
combophy driver landed. Note, it is dependent on this series to function
(aside from the rk3566 dwc3-otg port, which will work currently).

This series is still dependent on Patch 4 of the combophy series, which
has yet to be accepted.

Patches 1 and 2 add the dt bindings for the grf changes necessary for
this series.
Patch 3 adds support to the grf driver to set the rk3566 otg clock
source.
Patch 4 is a downstream patch ported forward to shut down the usb3 clock
when the controller is operating in usb2 mode.
Patches 5 and 6 clean up the dwc3-of-simple driver and add the
compatible for the rk3568.
Patch 7 adds the dwc3 nodes to the rk356x device tree includes.
Patch 8 enables the dwc3 nodes on the Quartz64 Model A.

Please review and apply.

Very Respectfully,
Peter Geis

Bin Yang (1):
  usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode

Peter Geis (7):
  dt-bindings: soc: grf: add rk3566-pipe-grf compatible
  dt-bindings: usb: dwc3: add description for rk3568
  soc: rockchip: set dwc3 clock for rk3566
  usb: dwc3: reorder dwc-of-simple compatibles
  usb: dwc3: add rk3568 dwc3 support
  arm64: dts: rockchip: add the dwc3 usb3 nodes to rk356x
  arm64: dts: rockchip: enable the dwc3 nodes on quartz64-a

 .../devicetree/bindings/soc/rockchip/grf.yaml |  1 +
 .../bindings/usb/rockchip,dwc3.yaml           |  7 ++-
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 37 +++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3566.dtsi      | 12 +++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      |  9 ++++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 45 ++++++++++++++++++-
 drivers/soc/rockchip/grf.c                    | 17 +++++++
 drivers/usb/dwc3/core.c                       |  4 ++
 drivers/usb/dwc3/core.h                       |  1 +
 drivers/usb/dwc3/dwc3-of-simple.c             | 10 +++--
 10 files changed, 137 insertions(+), 6 deletions(-)

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2022-02-25 14:56 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-25 14:54 Peter Geis [this message]
2022-02-25 14:54 ` [PATCH v1 0/8] enable usb support on rk356x Peter Geis
2022-02-25 14:54 ` Peter Geis
2022-02-25 14:54 ` [PATCH v1 1/8] dt-bindings: soc: grf: add rk3566-pipe-grf compatible Peter Geis
2022-02-25 14:54   ` Peter Geis
2022-02-25 14:54   ` Peter Geis
2022-02-25 14:54 ` [PATCH v1 2/8] dt-bindings: usb: dwc3: add description for rk3568 Peter Geis
2022-02-25 14:54   ` Peter Geis
2022-02-25 14:54   ` Peter Geis
2022-02-25 16:07   ` Johan Jonker
2022-02-25 16:07     ` Johan Jonker
2022-02-25 16:07     ` Johan Jonker
2022-02-25 18:04     ` Peter Geis
2022-02-25 18:04       ` Peter Geis
2022-02-25 18:04       ` Peter Geis
2022-02-25 14:54 ` [PATCH v1 3/8] soc: rockchip: set dwc3 clock for rk3566 Peter Geis
2022-02-25 14:54   ` Peter Geis
2022-02-25 14:54   ` Peter Geis
2022-02-25 14:54 ` [PATCH v1 4/8] usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode Peter Geis
2022-02-25 17:16   ` Jack Pham
2022-02-25 17:55     ` Peter Geis
2022-02-25 14:54 ` [PATCH v1 5/8] usb: dwc3: reorder dwc-of-simple compatibles Peter Geis
2022-02-25 14:54 ` [PATCH v1 6/8] usb: dwc3: add rk3568 dwc3 support Peter Geis
2022-02-25 17:08   ` Michael Riesch
2022-02-25 17:55     ` Peter Geis
2022-02-25 14:54 ` [PATCH v1 7/8] arm64: dts: rockchip: add rk356x dwc3 usb3 nodes Peter Geis
2022-02-25 14:54   ` Peter Geis
2022-02-25 14:54   ` Peter Geis
2022-02-25 17:01   ` Michael Riesch
2022-02-25 17:01     ` Michael Riesch
2022-02-25 17:01     ` Michael Riesch
2022-02-25 17:59     ` Peter Geis
2022-02-25 17:59       ` Peter Geis
2022-02-25 17:59       ` Peter Geis
2022-02-25 18:25       ` Michael Riesch
2022-02-25 18:25         ` Michael Riesch
2022-02-25 18:25         ` Michael Riesch
2022-02-25 14:54 ` [PATCH v1 8/8] arm64: dts: rockchip: enable dwc3 on quartz64-a Peter Geis
2022-02-25 14:54   ` Peter Geis
2022-02-25 14:54   ` Peter Geis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220225145432.422130-1-pgwipeout@gmail.com \
    --to=pgwipeout@gmail.com \
    --cc=balbi@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.