[PATCH v7 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER

All of lore.kernel.org
 help / color / mirror / Atom feed

From: "Clément Léger" <clement.leger@bootlin.com>
To: Eugen Hristev <eugen.hristev@microchip.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: u-boot@lists.denx.de,
	"Nicolas Ferre" <nicolas.ferre@microchip.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Claudiu Beznea" <Claudiu.Beznea@microchip.com>,
	"Clément Léger" <clement.leger@bootlin.com>,
	"Claudiu Beznea" <claudiu.beznea@microchip.com>
Subject: [PATCH v7 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER
Date: Fri, 11 Mar 2022 10:35:39 +0100	[thread overview]
Message-ID: <20220311093539.72669-5-clement.leger@bootlin.com> (raw)
In-Reply-To: <20220311093539.72669-1-clement.leger@bootlin.com>

Enable CONFIG_ATMEL_TCB_TIMER and disable CONFIG_ATMEL_PIT_TIMER.
This will allow using the TCB timer instead of the PIT one when running
under OP-TEE.

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
 configs/sama5d2_icp_mmc_defconfig            | 2 +-
 configs/sama5d2_ptc_ek_mmc_defconfig         | 2 +-
 configs/sama5d2_ptc_ek_nandflash_defconfig   | 2 +-
 configs/sama5d2_xplained_emmc_defconfig      | 2 +-
 configs/sama5d2_xplained_mmc_defconfig       | 2 +-
 configs/sama5d2_xplained_qspiflash_defconfig | 2 +-
 configs/sama5d2_xplained_spiflash_defconfig  | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/configs/sama5d2_icp_mmc_defconfig b/configs/sama5d2_icp_mmc_defconfig
index 7761a57e0c..c035d7aad8 100644
--- a/configs/sama5d2_icp_mmc_defconfig
+++ b/configs/sama5d2_icp_mmc_defconfig
@@ -82,6 +82,6 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
-CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 # CONFIG_EFI_LOADER_HII is not set
diff --git a/configs/sama5d2_ptc_ek_mmc_defconfig b/configs/sama5d2_ptc_ek_mmc_defconfig
index 9f458e100b..7cb5ba37f6 100644
--- a/configs/sama5d2_ptc_ek_mmc_defconfig
+++ b/configs/sama5d2_ptc_ek_mmc_defconfig
@@ -71,7 +71,7 @@ CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_TIMER=y
-CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_ptc_ek_nandflash_defconfig b/configs/sama5d2_ptc_ek_nandflash_defconfig
index 6460ff3dad..667a10e93f 100644
--- a/configs/sama5d2_ptc_ek_nandflash_defconfig
+++ b/configs/sama5d2_ptc_ek_nandflash_defconfig
@@ -71,7 +71,7 @@ CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_TIMER=y
-CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_xplained_emmc_defconfig b/configs/sama5d2_xplained_emmc_defconfig
index 844a9cde64..72544b65bb 100644
--- a/configs/sama5d2_xplained_emmc_defconfig
+++ b/configs/sama5d2_xplained_emmc_defconfig
@@ -90,7 +90,7 @@ CONFIG_DM_SPI=y
 CONFIG_ATMEL_QSPI=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
-CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig
index 0de0636587..bcdb84ce2c 100644
--- a/configs/sama5d2_xplained_mmc_defconfig
+++ b/configs/sama5d2_xplained_mmc_defconfig
@@ -92,7 +92,7 @@ CONFIG_DM_SPI=y
 CONFIG_ATMEL_QSPI=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
-CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_xplained_qspiflash_defconfig b/configs/sama5d2_xplained_qspiflash_defconfig
index a6e002e59e..c30a90a3e1 100644
--- a/configs/sama5d2_xplained_qspiflash_defconfig
+++ b/configs/sama5d2_xplained_qspiflash_defconfig
@@ -91,7 +91,7 @@ CONFIG_DM_SPI=y
 CONFIG_ATMEL_QSPI=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
-CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig
index 676385fe55..eae54469f8 100644
--- a/configs/sama5d2_xplained_spiflash_defconfig
+++ b/configs/sama5d2_xplained_spiflash_defconfig
@@ -95,7 +95,7 @@ CONFIG_DM_SPI=y
 CONFIG_ATMEL_QSPI=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
-CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-- 
2.34.1

next prev parent reply	other threads:[~2022-03-11  9:38 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-11  9:35 [PATCH v7 0/4] add TCB driver for sama5d2 Clément Léger
2022-03-11  9:35 ` [PATCH v7 1/4] timer: atmel_tcb_timer: add atmel_tcb driver Clément Léger
2022-03-11  9:35 ` [PATCH v7 2/4] ARM: dts: at91: sama5d2: add AIC node Clément Léger
2022-03-11  9:35 ` [PATCH v7 3/4] ARM: dts: at91: sama5d2: add TCB node Clément Léger
2022-03-11  9:35 ` Clément Léger [this message]
2022-03-22 11:18   ` [PATCH v7 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER Eugen.Hristev
2022-03-22 12:35     ` Clément Léger
2022-03-30 15:49       ` Clément Léger
2022-03-31  5:59         ` Eugen.Hristev
2022-03-31  7:40           ` Clément Léger
2022-03-31  7:53             ` Eugen.Hristev

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:7761a57e0 dfblob:c035d7aad dfblob:9f458e100 dfblob:7cb5ba37f
dfblob:6460ff3da dfblob:667a10e93 dfblob:844a9cde6 dfblob:72544b65b
dfblob:0de063658 dfblob:bcdb84ce2 dfblob:a6e002e59 dfblob:c30a90a3e
dfblob:676385fe5 dfblob:eae54469f )
 OR (
bs:"[PATCH v7 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220311093539.72669-5-clement.leger@bootlin.com \
    --to=clement.leger@bootlin.com \
    --cc=Claudiu.Beznea@microchip.com \
    --cc=eugen.hristev@microchip.com \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.