From: Sathvika Vasireddy <sv@linux.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: peterz@infradead.org, linux-kernel@vger.kernel.org,
rostedt@goodmis.org, aik@ozlabs.ru, sv@linux.ibm.com,
jpoimboe@redhat.com, naveen.n.rao@linux.vnet.ibm.com
Subject: [RFC PATCH 3/3] objtool/mcount: Add powerpc specific functions
Date: Fri, 18 Mar 2022 16:21:40 +0530 [thread overview]
Message-ID: <20220318105140.43914-4-sv@linux.ibm.com> (raw)
In-Reply-To: <20220318105140.43914-1-sv@linux.ibm.com>
This patch adds powerpc specific functions required for
'objtool mcount' to work, and enables mcount for ppc.
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
---
arch/powerpc/Kconfig | 1 +
tools/objtool/Makefile | 4 ++
tools/objtool/arch/powerpc/Build | 1 +
tools/objtool/arch/powerpc/decode.c | 51 +++++++++++++++++++
.../arch/powerpc/include/arch/cfi_regs.h | 37 ++++++++++++++
tools/objtool/arch/powerpc/include/arch/elf.h | 8 +++
tools/objtool/utils.c | 28 ++++++++--
7 files changed, 125 insertions(+), 5 deletions(-)
create mode 100644 tools/objtool/arch/powerpc/Build
create mode 100644 tools/objtool/arch/powerpc/decode.c
create mode 100644 tools/objtool/arch/powerpc/include/arch/cfi_regs.h
create mode 100644 tools/objtool/arch/powerpc/include/arch/elf.h
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b779603978e1..5ddafd3ce210 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -225,6 +225,7 @@ config PPC
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NMI if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
select HAVE_OPTPROBES
+ select HAVE_OBJTOOL_MCOUNT
select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI if PPC64
select HAVE_PERF_REGS
diff --git a/tools/objtool/Makefile b/tools/objtool/Makefile
index 8404cf696954..06a9fcb4a0a3 100644
--- a/tools/objtool/Makefile
+++ b/tools/objtool/Makefile
@@ -49,6 +49,10 @@ ifeq ($(SRCARCH),x86)
SUBCMD_MCOUNT := y
endif
+ifeq ($(SRCARCH),powerpc)
+ SUBCMD_MCOUNT := y
+endif
+
export SUBCMD_CHECK SUBCMD_ORC SUBCMD_MCOUNT
export srctree OUTPUT CFLAGS SRCARCH AWK
include $(srctree)/tools/build/Makefile.include
diff --git a/tools/objtool/arch/powerpc/Build b/tools/objtool/arch/powerpc/Build
new file mode 100644
index 000000000000..3ff1f00c6a47
--- /dev/null
+++ b/tools/objtool/arch/powerpc/Build
@@ -0,0 +1 @@
+objtool-y += decode.o
diff --git a/tools/objtool/arch/powerpc/decode.c b/tools/objtool/arch/powerpc/decode.c
new file mode 100644
index 000000000000..58988f88b315
--- /dev/null
+++ b/tools/objtool/arch/powerpc/decode.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <objtool/check.h>
+#include <objtool/elf.h>
+#include <objtool/arch.h>
+#include <objtool/warn.h>
+#include <objtool/builtin.h>
+
+int arch_decode_instruction(struct objtool_file *file, const struct section *sec,
+ unsigned long offset, unsigned int maxlen,
+ unsigned int *len, enum insn_type *type,
+ unsigned long *immediate,
+ struct list_head *ops_list)
+{
+ u32 insn;
+ unsigned int opcode;
+ u64 imm;
+
+ *immediate = imm = 0;
+ memcpy(&insn, sec->data->d_buf+offset, 4);
+ *len = 4;
+ *type = INSN_OTHER;
+
+ opcode = (insn >> 26);
+
+ switch (opcode) {
+ case 18: /* bl */
+ *type = INSN_CALL;
+ break;
+ }
+ *immediate = imm;
+ return 0;
+}
+
+unsigned long arch_dest_reloc_offset(int addend)
+{
+ return addend;
+}
+
+unsigned long arch_jump_destination(struct instruction *insn)
+{
+ return insn->offset + insn->immediate;
+}
+
+const char *arch_nop_insn(int len)
+{
+ return NULL;
+}
diff --git a/tools/objtool/arch/powerpc/include/arch/cfi_regs.h b/tools/objtool/arch/powerpc/include/arch/cfi_regs.h
new file mode 100644
index 000000000000..1369176c8a94
--- /dev/null
+++ b/tools/objtool/arch/powerpc/include/arch/cfi_regs.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _OBJTOOL_CFI_REGS_H
+#define _OBJTOOL_CFI_REGS_H
+
+#define CFI_SP 1
+#define CFI_TOC 2
+#define CFI_R3 3
+#define CFI_R4 4
+#define CFI_R5 5
+#define CFI_R6 6
+#define CFI_R7 7
+#define CFI_R8 8
+#define CFI_R9 9
+#define CFI_R10 10
+#define CFI_R14 14
+#define CFI_R15 15
+#define CFI_R16 16
+#define CFI_R17 17
+#define CFI_R18 18
+#define CFI_R19 19
+#define CFI_R20 20
+#define CFI_R21 21
+#define CFI_R22 22
+#define CFI_R23 23
+#define CFI_R24 24
+#define CFI_R25 25
+#define CFI_R26 26
+#define CFI_R27 27
+#define CFI_R28 28
+#define CFI_R29 29
+#define CFI_R30 30
+#define CFI_R31 31
+#define CFI_LR 32
+#define CFI_NUM_REGS 33
+
+#endif
diff --git a/tools/objtool/arch/powerpc/include/arch/elf.h b/tools/objtool/arch/powerpc/include/arch/elf.h
new file mode 100644
index 000000000000..3c8ebb7d2a6b
--- /dev/null
+++ b/tools/objtool/arch/powerpc/include/arch/elf.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _OBJTOOL_ARCH_ELF
+#define _OBJTOOL_ARCH_ELF
+
+#define R_NONE R_PPC_NONE
+
+#endif /* _OBJTOOL_ARCH_ELF */
diff --git a/tools/objtool/utils.c b/tools/objtool/utils.c
index d1fc6a123a6e..c9c14fa0dfd7 100644
--- a/tools/objtool/utils.c
+++ b/tools/objtool/utils.c
@@ -179,11 +179,29 @@ int create_mcount_loc_sections(struct objtool_file *file)
loc = (unsigned long *)sec->data->d_buf + idx;
memset(loc, 0, sizeof(unsigned long));
- if (elf_add_reloc_to_insn(file->elf, sec,
- idx * sizeof(unsigned long),
- R_X86_64_64,
- insn->sec, insn->offset))
- return -1;
+ if (file->elf->ehdr.e_machine == EM_X86_64) {
+ if (elf_add_reloc_to_insn(file->elf, sec,
+ idx * sizeof(unsigned long),
+ R_X86_64_64,
+ insn->sec, insn->offset))
+ return -1;
+ }
+
+ if (file->elf->ehdr.e_machine == EM_PPC64) {
+ if (elf_add_reloc_to_insn(file->elf, sec,
+ idx * sizeof(unsigned long),
+ R_PPC64_ADDR64,
+ insn->sec, insn->offset))
+ return -1;
+ }
+
+ if (file->elf->ehdr.e_machine == EM_PPC) {
+ if (elf_add_reloc_to_insn(file->elf, sec,
+ idx * sizeof(unsigned long),
+ R_PPC_ADDR32,
+ insn->sec, insn->offset))
+ return -1;
+ }
idx++;
}
--
2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Sathvika Vasireddy <sv@linux.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: jpoimboe@redhat.com, peterz@infradead.org,
linux-kernel@vger.kernel.org, aik@ozlabs.ru, mpe@ellerman.id.au,
rostedt@goodmis.org, naveen.n.rao@linux.vnet.ibm.com,
sv@linux.ibm.com
Subject: [RFC PATCH 3/3] objtool/mcount: Add powerpc specific functions
Date: Fri, 18 Mar 2022 16:21:40 +0530 [thread overview]
Message-ID: <20220318105140.43914-4-sv@linux.ibm.com> (raw)
In-Reply-To: <20220318105140.43914-1-sv@linux.ibm.com>
This patch adds powerpc specific functions required for
'objtool mcount' to work, and enables mcount for ppc.
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
---
arch/powerpc/Kconfig | 1 +
tools/objtool/Makefile | 4 ++
tools/objtool/arch/powerpc/Build | 1 +
tools/objtool/arch/powerpc/decode.c | 51 +++++++++++++++++++
.../arch/powerpc/include/arch/cfi_regs.h | 37 ++++++++++++++
tools/objtool/arch/powerpc/include/arch/elf.h | 8 +++
tools/objtool/utils.c | 28 ++++++++--
7 files changed, 125 insertions(+), 5 deletions(-)
create mode 100644 tools/objtool/arch/powerpc/Build
create mode 100644 tools/objtool/arch/powerpc/decode.c
create mode 100644 tools/objtool/arch/powerpc/include/arch/cfi_regs.h
create mode 100644 tools/objtool/arch/powerpc/include/arch/elf.h
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b779603978e1..5ddafd3ce210 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -225,6 +225,7 @@ config PPC
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NMI if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
select HAVE_OPTPROBES
+ select HAVE_OBJTOOL_MCOUNT
select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI if PPC64
select HAVE_PERF_REGS
diff --git a/tools/objtool/Makefile b/tools/objtool/Makefile
index 8404cf696954..06a9fcb4a0a3 100644
--- a/tools/objtool/Makefile
+++ b/tools/objtool/Makefile
@@ -49,6 +49,10 @@ ifeq ($(SRCARCH),x86)
SUBCMD_MCOUNT := y
endif
+ifeq ($(SRCARCH),powerpc)
+ SUBCMD_MCOUNT := y
+endif
+
export SUBCMD_CHECK SUBCMD_ORC SUBCMD_MCOUNT
export srctree OUTPUT CFLAGS SRCARCH AWK
include $(srctree)/tools/build/Makefile.include
diff --git a/tools/objtool/arch/powerpc/Build b/tools/objtool/arch/powerpc/Build
new file mode 100644
index 000000000000..3ff1f00c6a47
--- /dev/null
+++ b/tools/objtool/arch/powerpc/Build
@@ -0,0 +1 @@
+objtool-y += decode.o
diff --git a/tools/objtool/arch/powerpc/decode.c b/tools/objtool/arch/powerpc/decode.c
new file mode 100644
index 000000000000..58988f88b315
--- /dev/null
+++ b/tools/objtool/arch/powerpc/decode.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <objtool/check.h>
+#include <objtool/elf.h>
+#include <objtool/arch.h>
+#include <objtool/warn.h>
+#include <objtool/builtin.h>
+
+int arch_decode_instruction(struct objtool_file *file, const struct section *sec,
+ unsigned long offset, unsigned int maxlen,
+ unsigned int *len, enum insn_type *type,
+ unsigned long *immediate,
+ struct list_head *ops_list)
+{
+ u32 insn;
+ unsigned int opcode;
+ u64 imm;
+
+ *immediate = imm = 0;
+ memcpy(&insn, sec->data->d_buf+offset, 4);
+ *len = 4;
+ *type = INSN_OTHER;
+
+ opcode = (insn >> 26);
+
+ switch (opcode) {
+ case 18: /* bl */
+ *type = INSN_CALL;
+ break;
+ }
+ *immediate = imm;
+ return 0;
+}
+
+unsigned long arch_dest_reloc_offset(int addend)
+{
+ return addend;
+}
+
+unsigned long arch_jump_destination(struct instruction *insn)
+{
+ return insn->offset + insn->immediate;
+}
+
+const char *arch_nop_insn(int len)
+{
+ return NULL;
+}
diff --git a/tools/objtool/arch/powerpc/include/arch/cfi_regs.h b/tools/objtool/arch/powerpc/include/arch/cfi_regs.h
new file mode 100644
index 000000000000..1369176c8a94
--- /dev/null
+++ b/tools/objtool/arch/powerpc/include/arch/cfi_regs.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _OBJTOOL_CFI_REGS_H
+#define _OBJTOOL_CFI_REGS_H
+
+#define CFI_SP 1
+#define CFI_TOC 2
+#define CFI_R3 3
+#define CFI_R4 4
+#define CFI_R5 5
+#define CFI_R6 6
+#define CFI_R7 7
+#define CFI_R8 8
+#define CFI_R9 9
+#define CFI_R10 10
+#define CFI_R14 14
+#define CFI_R15 15
+#define CFI_R16 16
+#define CFI_R17 17
+#define CFI_R18 18
+#define CFI_R19 19
+#define CFI_R20 20
+#define CFI_R21 21
+#define CFI_R22 22
+#define CFI_R23 23
+#define CFI_R24 24
+#define CFI_R25 25
+#define CFI_R26 26
+#define CFI_R27 27
+#define CFI_R28 28
+#define CFI_R29 29
+#define CFI_R30 30
+#define CFI_R31 31
+#define CFI_LR 32
+#define CFI_NUM_REGS 33
+
+#endif
diff --git a/tools/objtool/arch/powerpc/include/arch/elf.h b/tools/objtool/arch/powerpc/include/arch/elf.h
new file mode 100644
index 000000000000..3c8ebb7d2a6b
--- /dev/null
+++ b/tools/objtool/arch/powerpc/include/arch/elf.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _OBJTOOL_ARCH_ELF
+#define _OBJTOOL_ARCH_ELF
+
+#define R_NONE R_PPC_NONE
+
+#endif /* _OBJTOOL_ARCH_ELF */
diff --git a/tools/objtool/utils.c b/tools/objtool/utils.c
index d1fc6a123a6e..c9c14fa0dfd7 100644
--- a/tools/objtool/utils.c
+++ b/tools/objtool/utils.c
@@ -179,11 +179,29 @@ int create_mcount_loc_sections(struct objtool_file *file)
loc = (unsigned long *)sec->data->d_buf + idx;
memset(loc, 0, sizeof(unsigned long));
- if (elf_add_reloc_to_insn(file->elf, sec,
- idx * sizeof(unsigned long),
- R_X86_64_64,
- insn->sec, insn->offset))
- return -1;
+ if (file->elf->ehdr.e_machine == EM_X86_64) {
+ if (elf_add_reloc_to_insn(file->elf, sec,
+ idx * sizeof(unsigned long),
+ R_X86_64_64,
+ insn->sec, insn->offset))
+ return -1;
+ }
+
+ if (file->elf->ehdr.e_machine == EM_PPC64) {
+ if (elf_add_reloc_to_insn(file->elf, sec,
+ idx * sizeof(unsigned long),
+ R_PPC64_ADDR64,
+ insn->sec, insn->offset))
+ return -1;
+ }
+
+ if (file->elf->ehdr.e_machine == EM_PPC) {
+ if (elf_add_reloc_to_insn(file->elf, sec,
+ idx * sizeof(unsigned long),
+ R_PPC_ADDR32,
+ insn->sec, insn->offset))
+ return -1;
+ }
idx++;
}
--
2.31.1
next prev parent reply other threads:[~2022-03-18 21:48 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-18 10:51 [RFC PATCH 0/3] objtool: Add mcount sub-command Sathvika Vasireddy
2022-03-18 10:51 ` Sathvika Vasireddy
2022-03-18 10:51 ` [RFC PATCH 1/3] objtool: Move common code to utils.c Sathvika Vasireddy
2022-03-18 10:51 ` Sathvika Vasireddy
2022-03-23 18:02 ` Miroslav Benes
2022-03-23 18:02 ` Miroslav Benes
2022-03-18 10:51 ` [RFC PATCH 2/3] objtool: Enable and implement 'mcount' subcommand Sathvika Vasireddy
2022-03-18 10:51 ` Sathvika Vasireddy
2022-03-21 7:06 ` Christophe Leroy
2022-03-21 8:19 ` Naveen N. Rao
2022-03-21 8:19 ` Naveen N. Rao
2022-03-21 8:26 ` Christophe Leroy
2022-03-21 8:26 ` Christophe Leroy
2022-03-21 9:48 ` Naveen N. Rao
2022-03-21 9:48 ` Naveen N. Rao
2022-03-18 10:51 ` Sathvika Vasireddy [this message]
2022-03-18 10:51 ` [RFC PATCH 3/3] objtool/mcount: Add powerpc specific functions Sathvika Vasireddy
2022-03-18 12:26 ` Peter Zijlstra
2022-03-18 12:26 ` Peter Zijlstra
2022-03-18 13:59 ` Christophe Leroy
2022-03-18 13:59 ` Christophe Leroy
2022-03-21 2:27 ` Michael Ellerman
2022-03-21 6:47 ` Christophe Leroy
2022-03-21 7:46 ` Christophe Leroy
2022-03-21 7:56 ` Christophe Leroy
2022-03-21 8:30 ` Christophe Leroy
2022-03-21 8:59 ` Christophe Leroy
2022-03-26 7:58 ` Christophe Leroy
2022-03-26 7:58 ` Christophe Leroy
2022-03-21 6:25 ` Naveen N. Rao
2022-03-21 6:25 ` Naveen N. Rao
2022-03-27 9:09 ` Christophe Leroy
2022-03-27 9:09 ` Christophe Leroy
2022-03-28 19:59 ` Josh Poimboeuf
2022-03-28 19:59 ` Josh Poimboeuf
2022-03-28 20:14 ` Peter Zijlstra
2022-03-28 20:14 ` Peter Zijlstra
2022-03-28 20:15 ` Peter Zijlstra
2022-03-28 20:15 ` Peter Zijlstra
2022-03-28 20:21 ` Josh Poimboeuf
2022-03-28 20:21 ` Josh Poimboeuf
2022-03-29 12:01 ` Michael Ellerman
2022-03-29 12:01 ` Michael Ellerman
2022-03-29 17:32 ` Christophe Leroy
2022-03-30 4:26 ` Josh Poimboeuf
2022-03-30 4:26 ` Josh Poimboeuf
2022-03-30 18:40 ` Naveen N. Rao
2022-03-30 18:40 ` Naveen N. Rao
2022-05-12 14:52 ` Christophe Leroy
2022-05-12 14:52 ` Christophe Leroy
2022-05-12 15:12 ` Josh Poimboeuf
2022-05-12 15:12 ` Josh Poimboeuf
2022-05-21 9:38 ` Christophe Leroy
2022-05-21 9:38 ` Christophe Leroy
2022-05-21 10:57 ` Peter Zijlstra
2022-05-21 10:57 ` Peter Zijlstra
2022-05-23 5:39 ` Naveen N. Rao
2022-05-23 5:39 ` Naveen N. Rao
2022-03-19 1:35 ` [RFC PATCH 0/3] objtool: Add mcount sub-command Josh Poimboeuf
2022-03-19 1:35 ` Josh Poimboeuf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220318105140.43914-4-sv@linux.ibm.com \
--to=sv@linux.ibm.com \
--cc=aik@ozlabs.ru \
--cc=jpoimboe@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=naveen.n.rao@linux.vnet.ibm.com \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.