Re: [PATCH net-next 0/9] net: dsa: mt7530: updates for phylink changes

From: "Marek Behún" <kabel@kernel.org>
To: "Russell King (Oracle)" <linux@armlinux.org.uk>
Cc: Landen Chao <Landen.Chao@mediatek.com>,
	DENG Qingfang <dqfext@gmail.com>,
	Sean Wang <sean.wang@mediatek.com>, Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Subject: Re: [PATCH net-next 0/9] net: dsa: mt7530: updates for phylink changes
Date: Thu, 7 Apr 2022 00:35:26 +0200	[thread overview]
Message-ID: <20220407003526.7d4c2ebb@thinkpad> (raw)
In-Reply-To: <Yk1iHCy4fqvxsvu0@shell.armlinux.org.uk>

On Wed, 6 Apr 2022 10:49:16 +0100
"Russell King (Oracle)" <linux@armlinux.org.uk> wrote:

> Hi,
> 
> This revised series is a partial conversion of the mt7530 DSA driver to
> the modern phylink infrastructure. This driver has some exceptional
> cases which prevent - at the moment - its full conversion (particularly
> with the Autoneg bit) to using phylink_generic_validate().
> 
> Patch 1 fixes the incorrect test highlighted in the first RFC series.
> 
> Patch 2 fixes the incorrect assumption that RGMII is unable to support
> 1000BASE-X.
> 
> Patch 3 populates the supported_interfaces for each port
> 
> Patch 4 removes the interface checks that become unnecessary as a result
> of patch 3.
> 
> Patch 5 removes use of phylink_helper_basex_speed() which is no longer
> required by phylink.
> 
> Patch 6 becomes possible after patch 5, only indicating the ethtool
> modes that can be supported with a particular interface mode - this
> involves removing some modes and adding others as per phylink
> documentation.
> 
> Patch 7 switches the driver to use phylink_get_linkmodes(), which moves
> the driver as close as we can to phylink_generic_validate() due to the
> Autoneg bit issue mentioned above.
> 
> Patch 8 converts the driver to the phylink pcs support, removing a bunch
> of driver private indirected methods. We include TRGMII as a PCS even
> though strictly TRGMII does not have a PCS. This is convenient to allow
> the change in patch 9 to be made.
> 
> Patch 9 moves the special autoneg handling to the PCS validate method,
> which means we can convert the MAC side to the generic validator.
> 
> Patch 10 marks the driver as non-legacy.
> 
> The series was posted on 23 February, and a ping sent on 3 March, but
> no feedback has been received. The previous posting also received no
> feedback on the actual patches either.
> 
>  drivers/net/dsa/mt7530.c | 330 +++++++++++++++++++++--------------------------
>  drivers/net/dsa/mt7530.h |  26 ++--
>  2 files changed, 159 insertions(+), 197 deletions(-)
> 

Tested-by: Marek Behún <kabel@kernel.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek