All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Landen Chao <Landen.Chao@mediatek.com>,
	DENG Qingfang <dqfext@gmail.com>,
	Sean Wang <sean.wang@mediatek.com>
Cc: Marek Beh__n <kabel@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Subject: [PATCH net-next 1/9] net: dsa: mt7530: 1G can also support 1000BASE-X link mode
Date: Wed, 06 Apr 2022 11:48:36 +0100	[thread overview]
Message-ID: <E1nc3DI-004hpj-UU@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Yk1iHCy4fqvxsvu0@shell.armlinux.org.uk>

When using an external PHY connected using RGMII to mt7531 port 5, the
PHY can be used to used support 1000BASE-X connections. Moreover, if
1000BASE-T is supported, then we should allow 1000BASE-X as well, since
which are supported is a property of the PHY.

Therefore, it makes no sense to exclude this from the linkmodes when
1000BASE-T is supported.

Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/dsa/mt7530.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 19f0035d4410..20cadee13361 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2539,13 +2539,8 @@ static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port,
 	/* Port5 supports ethier RGMII or SGMII.
 	 * Port6 supports SGMII only.
 	 */
-	switch (port) {
-	case 5:
-		if (mt7531_is_rgmii_port(priv, port))
-			break;
-		fallthrough;
-	case 6:
-		phylink_set(supported, 1000baseX_Full);
+	if (port == 6 ||
+	    (port == 5 && !mt7531_is_rgmii_port(priv, port))) {
 		phylink_set(supported, 2500baseX_Full);
 		phylink_set(supported, 2500baseT_Full);
 	}
@@ -2913,8 +2908,6 @@ static void
 mt7530_mac_port_validate(struct dsa_switch *ds, int port,
 			 unsigned long *supported)
 {
-	if (port == 5)
-		phylink_set(supported, 1000baseX_Full);
 }
 
 static void mt7531_mac_port_validate(struct dsa_switch *ds, int port,
@@ -2951,8 +2944,10 @@ mt753x_phylink_validate(struct dsa_switch *ds, int port,
 	}
 
 	/* This switch only supports 1G full-duplex. */
-	if (state->interface != PHY_INTERFACE_MODE_MII)
+	if (state->interface != PHY_INTERFACE_MODE_MII) {
 		phylink_set(mask, 1000baseT_Full);
+		phylink_set(mask, 1000baseX_Full);
+	}
 
 	priv->info->mac_port_validate(ds, port, mask);
 
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Landen Chao <Landen.Chao@mediatek.com>,
	DENG Qingfang <dqfext@gmail.com>,
	Sean Wang <sean.wang@mediatek.com>
Cc: Marek Beh__n <kabel@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Subject: [PATCH net-next 1/9] net: dsa: mt7530: 1G can also support 1000BASE-X link mode
Date: Wed, 06 Apr 2022 11:48:36 +0100	[thread overview]
Message-ID: <E1nc3DI-004hpj-UU@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Yk1iHCy4fqvxsvu0@shell.armlinux.org.uk>

When using an external PHY connected using RGMII to mt7531 port 5, the
PHY can be used to used support 1000BASE-X connections. Moreover, if
1000BASE-T is supported, then we should allow 1000BASE-X as well, since
which are supported is a property of the PHY.

Therefore, it makes no sense to exclude this from the linkmodes when
1000BASE-T is supported.

Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/dsa/mt7530.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 19f0035d4410..20cadee13361 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2539,13 +2539,8 @@ static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port,
 	/* Port5 supports ethier RGMII or SGMII.
 	 * Port6 supports SGMII only.
 	 */
-	switch (port) {
-	case 5:
-		if (mt7531_is_rgmii_port(priv, port))
-			break;
-		fallthrough;
-	case 6:
-		phylink_set(supported, 1000baseX_Full);
+	if (port == 6 ||
+	    (port == 5 && !mt7531_is_rgmii_port(priv, port))) {
 		phylink_set(supported, 2500baseX_Full);
 		phylink_set(supported, 2500baseT_Full);
 	}
@@ -2913,8 +2908,6 @@ static void
 mt7530_mac_port_validate(struct dsa_switch *ds, int port,
 			 unsigned long *supported)
 {
-	if (port == 5)
-		phylink_set(supported, 1000baseX_Full);
 }
 
 static void mt7531_mac_port_validate(struct dsa_switch *ds, int port,
@@ -2951,8 +2944,10 @@ mt753x_phylink_validate(struct dsa_switch *ds, int port,
 	}
 
 	/* This switch only supports 1G full-duplex. */
-	if (state->interface != PHY_INTERFACE_MODE_MII)
+	if (state->interface != PHY_INTERFACE_MODE_MII) {
 		phylink_set(mask, 1000baseT_Full);
+		phylink_set(mask, 1000baseX_Full);
+	}
 
 	priv->info->mac_port_validate(ds, port, mask);
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Landen Chao <Landen.Chao@mediatek.com>,
	DENG Qingfang <dqfext@gmail.com>,
	Sean Wang <sean.wang@mediatek.com>
Cc: Marek Beh__n <kabel@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Subject: [PATCH net-next 1/9] net: dsa: mt7530: 1G can also support 1000BASE-X link mode
Date: Wed, 06 Apr 2022 11:48:36 +0100	[thread overview]
Message-ID: <E1nc3DI-004hpj-UU@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Yk1iHCy4fqvxsvu0@shell.armlinux.org.uk>

When using an external PHY connected using RGMII to mt7531 port 5, the
PHY can be used to used support 1000BASE-X connections. Moreover, if
1000BASE-T is supported, then we should allow 1000BASE-X as well, since
which are supported is a property of the PHY.

Therefore, it makes no sense to exclude this from the linkmodes when
1000BASE-T is supported.

Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/dsa/mt7530.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 19f0035d4410..20cadee13361 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2539,13 +2539,8 @@ static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port,
 	/* Port5 supports ethier RGMII or SGMII.
 	 * Port6 supports SGMII only.
 	 */
-	switch (port) {
-	case 5:
-		if (mt7531_is_rgmii_port(priv, port))
-			break;
-		fallthrough;
-	case 6:
-		phylink_set(supported, 1000baseX_Full);
+	if (port == 6 ||
+	    (port == 5 && !mt7531_is_rgmii_port(priv, port))) {
 		phylink_set(supported, 2500baseX_Full);
 		phylink_set(supported, 2500baseT_Full);
 	}
@@ -2913,8 +2908,6 @@ static void
 mt7530_mac_port_validate(struct dsa_switch *ds, int port,
 			 unsigned long *supported)
 {
-	if (port == 5)
-		phylink_set(supported, 1000baseX_Full);
 }
 
 static void mt7531_mac_port_validate(struct dsa_switch *ds, int port,
@@ -2951,8 +2944,10 @@ mt753x_phylink_validate(struct dsa_switch *ds, int port,
 	}
 
 	/* This switch only supports 1G full-duplex. */
-	if (state->interface != PHY_INTERFACE_MODE_MII)
+	if (state->interface != PHY_INTERFACE_MODE_MII) {
 		phylink_set(mask, 1000baseT_Full);
+		phylink_set(mask, 1000baseX_Full);
+	}
 
 	priv->info->mac_port_validate(ds, port, mask);
 
-- 
2.30.2


  reply	other threads:[~2022-04-06 10:54 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-06  9:49 [PATCH net-next 0/9] net: dsa: mt7530: updates for phylink changes Russell King (Oracle)
2022-04-06  9:49 ` Russell King (Oracle)
2022-04-06  9:49 ` Russell King (Oracle)
2022-04-06 10:48 ` Russell King (Oracle) [this message]
2022-04-06 10:48   ` [PATCH net-next 1/9] net: dsa: mt7530: 1G can also support 1000BASE-X link mode Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48 ` [PATCH net-next 2/9] net: dsa: mt7530: populate supported_interfaces and mac_capabilities Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48 ` [PATCH net-next 3/9] net: dsa: mt7530: remove interface checks Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48 ` [PATCH net-next 4/9] net: dsa: mt7530: drop use of phylink_helper_basex_speed() Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48 ` [PATCH net-next 5/9] net: dsa: mt7530: only indicate linkmodes that can be supported Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 10:48   ` Russell King (Oracle)
2022-04-06 18:52   ` Jakub Kicinski
2022-04-06 18:52     ` Jakub Kicinski
2022-04-06 18:52     ` Jakub Kicinski
2022-04-06 20:34     ` Marek Behún
2022-04-06 20:34       ` Marek Behún
2022-04-06 20:34       ` Marek Behún
2022-04-07 14:47       ` Russell King (Oracle)
2022-04-07 14:47         ` Russell King (Oracle)
2022-04-07 14:47         ` Russell King (Oracle)
2022-04-06 10:49 ` [PATCH net-next 6/9] net: dsa: mt7530: switch to use phylink_get_linkmodes() Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49 ` [PATCH net-next 7/9] net: dsa: mt7530: partially convert to phylink_pcs Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49 ` [PATCH net-next 8/9] net: dsa: mt7530: move autoneg handling to PCS validation Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49 ` [PATCH net-next 9/9] net: dsa: mt7530: mark as non-legacy Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 10:49   ` Russell King (Oracle)
2022-04-06 22:35 ` [PATCH net-next 0/9] net: dsa: mt7530: updates for phylink changes Marek Behún
2022-04-06 22:35   ` Marek Behún
2022-04-06 22:35   ` Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1nc3DI-004hpj-UU@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=Landen.Chao@mediatek.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=dqfext@gmail.com \
    --cc=f.fainelli@gmail.com \
    --cc=kabel@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=sean.wang@mediatek.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.