From: Shawn Guo <shawnguo@kernel.org>
To: Li Yang <leoyang.li@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Pankaj Bansal <pankaj.bansal@nxp.com>,
Sandeep Malik <sandeep.malik@nxp.com>,
Priyanka Jain <priyanka.jain@nxp.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 6/6] arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A.
Date: Sun, 10 Apr 2022 09:27:57 +0800 [thread overview]
Message-ID: <20220410012757.GK129381@dragon> (raw)
In-Reply-To: <20220317190109.3742-6-leoyang.li@nxp.com>
On Thu, Mar 17, 2022 at 02:01:09PM -0500, Li Yang wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> NXP Erratum A008585 affects A57 core cluster used in LS2085rev1.
s/LS2085rev1/LS2085 rev1
Shawn
> However this problem has been fixed in A72 core cluster used in LS2088.
> Therefore remove the erratum from LS2088A. Keeping it only in LS2085.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> Reviewed-by: Sandeep Malik <sandeep.malik@nxp.com>
> Acked-by: Priyanka Jain <priyanka.jain@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 4 ++++
> arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 3 +--
> 2 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> index 6f6667b70028..a2cadf757148 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> @@ -150,3 +150,7 @@ &pcie4 {
> ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */
> 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
> };
> +
> +&timer {
> + fsl,erratum-a008585;
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> index 3cb9c21d2775..d823d54a01a5 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> @@ -239,13 +239,12 @@ map0 {
> };
> };
>
> - timer {
> + timer: timer {
> compatible = "arm,armv8-timer";
> interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
> <1 14 4>, /* Physical Non-Secure PPI, active-low */
> <1 11 4>, /* Virtual PPI, active-low */
> <1 10 4>; /* Hypervisor PPI, active-low */
> - fsl,erratum-a008585;
> };
>
> pmu {
> --
> 2.25.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Li Yang <leoyang.li@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Pankaj Bansal <pankaj.bansal@nxp.com>,
Sandeep Malik <sandeep.malik@nxp.com>,
Priyanka Jain <priyanka.jain@nxp.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 6/6] arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A.
Date: Sun, 10 Apr 2022 09:27:57 +0800 [thread overview]
Message-ID: <20220410012757.GK129381@dragon> (raw)
In-Reply-To: <20220317190109.3742-6-leoyang.li@nxp.com>
On Thu, Mar 17, 2022 at 02:01:09PM -0500, Li Yang wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> NXP Erratum A008585 affects A57 core cluster used in LS2085rev1.
s/LS2085rev1/LS2085 rev1
Shawn
> However this problem has been fixed in A72 core cluster used in LS2088.
> Therefore remove the erratum from LS2088A. Keeping it only in LS2085.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> Reviewed-by: Sandeep Malik <sandeep.malik@nxp.com>
> Acked-by: Priyanka Jain <priyanka.jain@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 4 ++++
> arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 3 +--
> 2 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> index 6f6667b70028..a2cadf757148 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> @@ -150,3 +150,7 @@ &pcie4 {
> ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */
> 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
> };
> +
> +&timer {
> + fsl,erratum-a008585;
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> index 3cb9c21d2775..d823d54a01a5 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> @@ -239,13 +239,12 @@ map0 {
> };
> };
>
> - timer {
> + timer: timer {
> compatible = "arm,armv8-timer";
> interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
> <1 14 4>, /* Physical Non-Secure PPI, active-low */
> <1 11 4>, /* Virtual PPI, active-low */
> <1 10 4>; /* Hypervisor PPI, active-low */
> - fsl,erratum-a008585;
> };
>
> pmu {
> --
> 2.25.1
>
next prev parent reply other threads:[~2022-04-10 1:29 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-17 19:01 [PATCH 1/6] arm64: dts: ls2080a-qds: add mdio mux nodes from on-board FPGA Li Yang
2022-03-17 19:01 ` Li Yang
2022-03-17 19:01 ` [PATCH 2/6] arm64: dts: ls2088a-qds: " Li Yang
2022-03-17 19:01 ` Li Yang
2022-03-17 19:01 ` [PATCH 3/6] arm64: dts: ls2080a-rdb: add phy nodes Li Yang
2022-03-17 19:01 ` Li Yang
2022-04-10 1:12 ` Shawn Guo
2022-04-10 1:12 ` Shawn Guo
2022-03-17 19:01 ` [PATCH 4/6] arm64: dts: ls2081a-rdb: Add DTS support for NXP LS2081ARDB Li Yang
2022-03-17 19:01 ` Li Yang
2022-04-10 1:19 ` Shawn Guo
2022-04-10 1:19 ` Shawn Guo
2022-03-17 19:01 ` [PATCH 5/6] arm64: dts: ls208xa-rdb: fix errata E-00013 Li Yang
2022-03-17 19:01 ` Li Yang
2022-04-10 1:25 ` Shawn Guo
2022-04-10 1:25 ` Shawn Guo
2022-03-17 19:01 ` [PATCH 6/6] arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A Li Yang
2022-03-17 19:01 ` Li Yang
2022-04-10 1:27 ` Shawn Guo [this message]
2022-04-10 1:27 ` Shawn Guo
2022-04-10 1:10 ` [PATCH 1/6] arm64: dts: ls2080a-qds: add mdio mux nodes from on-board FPGA Shawn Guo
2022-04-10 1:10 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220410012757.GK129381@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pankaj.bansal@nxp.com \
--cc=priyanka.jain@nxp.com \
--cc=robh+dt@kernel.org \
--cc=sandeep.malik@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.