From: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
linux-arm-msm@vger.kernel.org,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, Andy Gross <agross@kernel.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Mark Brown <broonie@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Subject: Re: [PATCH v2 09/14] ASoC: dt-bindings:: qcom,q6asm: convert to dtschema
Date: Wed, 7 Sep 2022 12:57:59 -0500 [thread overview]
Message-ID: <20220907175759.GA3791463-robh@kernel.org> (raw)
In-Reply-To: <20220907101556.37394-10-krzysztof.kozlowski@linaro.org>
On Wed, Sep 07, 2022 at 12:15:51PM +0200, Krzysztof Kozlowski wrote:
> Convert Qualcomm Audio Stream Manager (Q6ASM) bindings to DT schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Expected warning because the qcom,apr.yaml is being fixed in next commit:
>
> Documentation/devicetree/bindings/sound/qcom,q6asm.example.dtb: apr: service@7: 'dais' does not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+'
> From schema: /home/krzk/dev/linux/linux/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
>
> Changes since v1:
> 1. New patch.
> ---
> .../devicetree/bindings/sound/qcom,q6asm.txt | 70 -----------
> .../devicetree/bindings/sound/qcom,q6asm.yaml | 112 ++++++++++++++++++
> 2 files changed, 112 insertions(+), 70 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/qcom,q6asm.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6asm.yaml
Should be qcom,q6asm-dais.yaml or you need to add qcom,q6asm compatible?
>
> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
> deleted file mode 100644
> index 0d0075125243..000000000000
> --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
> +++ /dev/null
> @@ -1,70 +0,0 @@
> -Qualcomm Audio Stream Manager (Q6ASM) binding
> -
> -Q6ASM is one of the APR audio service on Q6DSP.
> -Please refer to qcom,apr.txt for details of the common apr service bindings
> -used by the apr service device.
> -
> -- but must contain the following property:
> -
> -- compatible:
> - Usage: required
> - Value type: <stringlist>
> - Definition: must be "qcom,q6asm-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
> - Or "qcom,q6asm" where the version number can be queried
> - from DSP.
> - example "qcom,q6asm-v2.0"
Where is this compatible handled now?
> -
> -= ASM DAIs (Digital Audio Interface)
> -"dais" subnode of the ASM node represents dai specific configuration
> -
> -- compatible:
> - Usage: required
> - Value type: <stringlist>
> - Definition: must be "qcom,q6asm-dais".
> -
> -- #sound-dai-cells
> - Usage: required
> - Value type: <u32>
> - Definition: Must be 1
> -
> -== ASM DAI is subnode of "dais" and represent a dai, it includes board specific
> -configuration of each dai. Must contain the following properties.
> -
> -- reg
> - Usage: required
> - Value type: <u32>
> - Definition: Must be dai id
> -
> -- direction:
> - Usage: Required for Compress offload dais
> - Value type: <u32>
> - Definition: Specifies the direction of the dai stream
> - Q6ASM_DAI_TX_RX (0) for both tx and rx
> - Q6ASM_DAI_TX (1) for only tx (Capture/Encode)
> - Q6ASM_DAI_RX (2) for only rx (Playback/Decode)
> -
> -- is-compress-dai:
> - Usage: Required for Compress offload dais
> - Value type: <boolean>
> - Definition: present for Compress offload dais
> -
> -
> -= EXAMPLE
> -#include <dt-bindings/sound/qcom,q6asm.h>
> -
> -apr-service@7 {
> - compatible = "qcom,q6asm";
> - reg = <APR_SVC_ASM>;
> - q6asmdai: dais {
> - compatible = "qcom,q6asm-dais";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #sound-dai-cells = <1>;
> -
> - dai@0 {
> - reg = <0>;
> - direction = <Q6ASM_DAI_RX>;
> - is-compress-dai;
> - };
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml
> new file mode 100644
> index 000000000000..505bd64a0717
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml
> @@ -0,0 +1,112 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,q6asm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Audio Stream Manager (Q6ASM)
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> +
> +description:
> + Q6ASM is one of the APR audio services on Q6DSP. Each of its subnodes
> + represent a dai with board specific configuration.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,q6asm-dais
> +
> + iommus:
> + maxItems: 1
> +
> + '#sound-dai-cells':
> + const: 1
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> +patternProperties:
> + '^dai@[0-9]+$':
> + type: object
> + description:
> + Q6ASM Digital Audio Interface
> +
> + properties:
> + reg:
> + maxItems: 1
> +
> + direction:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2]
> + description: |
> + The direction of the dai stream::
> + - Q6ASM_DAI_TX_RX (0) for both tx and rx
> + - Q6ASM_DAI_TX (1) for only tx (Capture/Encode)
> + - Q6ASM_DAI_RX (2) for only rx (Playback/Decode)
> +
> + is-compress-dai:
> + type: boolean
> + description:
> + Compress offload dai.
> +
> + dependencies:
> + is-compress-dai: ['direction']
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - "#sound-dai-cells"
> + - "#address-cells"
> + - "#size-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/soc/qcom,apr.h>
> + #include <dt-bindings/sound/qcom,q6asm.h>
> +
> + apr {
> + compatible = "qcom,apr-v2";
> + qcom,domain = <APR_DOMAIN_ADSP>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + service@7 {
> + compatible = "qcom,q6asm";
> + reg = <APR_SVC_ASM>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +
> + dais {
> + compatible = "qcom,q6asm-dais";
> + iommus = <&apps_smmu 0x1821 0x0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #sound-dai-cells = <1>;
> +
> + dai@0 {
> + reg = <0>;
> + };
> +
> + dai@1 {
> + reg = <1>;
> + };
> +
> + dai@2 {
> + reg = <2>;
> + is-compress-dai;
> + direction = <1>;
> + };
> + };
> + };
> + };
> --
> 2.34.1
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org
Subject: Re: [PATCH v2 09/14] ASoC: dt-bindings:: qcom,q6asm: convert to dtschema
Date: Wed, 7 Sep 2022 12:57:59 -0500 [thread overview]
Message-ID: <20220907175759.GA3791463-robh@kernel.org> (raw)
In-Reply-To: <20220907101556.37394-10-krzysztof.kozlowski@linaro.org>
On Wed, Sep 07, 2022 at 12:15:51PM +0200, Krzysztof Kozlowski wrote:
> Convert Qualcomm Audio Stream Manager (Q6ASM) bindings to DT schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Expected warning because the qcom,apr.yaml is being fixed in next commit:
>
> Documentation/devicetree/bindings/sound/qcom,q6asm.example.dtb: apr: service@7: 'dais' does not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+'
> From schema: /home/krzk/dev/linux/linux/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
>
> Changes since v1:
> 1. New patch.
> ---
> .../devicetree/bindings/sound/qcom,q6asm.txt | 70 -----------
> .../devicetree/bindings/sound/qcom,q6asm.yaml | 112 ++++++++++++++++++
> 2 files changed, 112 insertions(+), 70 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/qcom,q6asm.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6asm.yaml
Should be qcom,q6asm-dais.yaml or you need to add qcom,q6asm compatible?
>
> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
> deleted file mode 100644
> index 0d0075125243..000000000000
> --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
> +++ /dev/null
> @@ -1,70 +0,0 @@
> -Qualcomm Audio Stream Manager (Q6ASM) binding
> -
> -Q6ASM is one of the APR audio service on Q6DSP.
> -Please refer to qcom,apr.txt for details of the common apr service bindings
> -used by the apr service device.
> -
> -- but must contain the following property:
> -
> -- compatible:
> - Usage: required
> - Value type: <stringlist>
> - Definition: must be "qcom,q6asm-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
> - Or "qcom,q6asm" where the version number can be queried
> - from DSP.
> - example "qcom,q6asm-v2.0"
Where is this compatible handled now?
> -
> -= ASM DAIs (Digital Audio Interface)
> -"dais" subnode of the ASM node represents dai specific configuration
> -
> -- compatible:
> - Usage: required
> - Value type: <stringlist>
> - Definition: must be "qcom,q6asm-dais".
> -
> -- #sound-dai-cells
> - Usage: required
> - Value type: <u32>
> - Definition: Must be 1
> -
> -== ASM DAI is subnode of "dais" and represent a dai, it includes board specific
> -configuration of each dai. Must contain the following properties.
> -
> -- reg
> - Usage: required
> - Value type: <u32>
> - Definition: Must be dai id
> -
> -- direction:
> - Usage: Required for Compress offload dais
> - Value type: <u32>
> - Definition: Specifies the direction of the dai stream
> - Q6ASM_DAI_TX_RX (0) for both tx and rx
> - Q6ASM_DAI_TX (1) for only tx (Capture/Encode)
> - Q6ASM_DAI_RX (2) for only rx (Playback/Decode)
> -
> -- is-compress-dai:
> - Usage: Required for Compress offload dais
> - Value type: <boolean>
> - Definition: present for Compress offload dais
> -
> -
> -= EXAMPLE
> -#include <dt-bindings/sound/qcom,q6asm.h>
> -
> -apr-service@7 {
> - compatible = "qcom,q6asm";
> - reg = <APR_SVC_ASM>;
> - q6asmdai: dais {
> - compatible = "qcom,q6asm-dais";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #sound-dai-cells = <1>;
> -
> - dai@0 {
> - reg = <0>;
> - direction = <Q6ASM_DAI_RX>;
> - is-compress-dai;
> - };
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml
> new file mode 100644
> index 000000000000..505bd64a0717
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml
> @@ -0,0 +1,112 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,q6asm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Audio Stream Manager (Q6ASM)
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> +
> +description:
> + Q6ASM is one of the APR audio services on Q6DSP. Each of its subnodes
> + represent a dai with board specific configuration.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,q6asm-dais
> +
> + iommus:
> + maxItems: 1
> +
> + '#sound-dai-cells':
> + const: 1
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> +patternProperties:
> + '^dai@[0-9]+$':
> + type: object
> + description:
> + Q6ASM Digital Audio Interface
> +
> + properties:
> + reg:
> + maxItems: 1
> +
> + direction:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2]
> + description: |
> + The direction of the dai stream::
> + - Q6ASM_DAI_TX_RX (0) for both tx and rx
> + - Q6ASM_DAI_TX (1) for only tx (Capture/Encode)
> + - Q6ASM_DAI_RX (2) for only rx (Playback/Decode)
> +
> + is-compress-dai:
> + type: boolean
> + description:
> + Compress offload dai.
> +
> + dependencies:
> + is-compress-dai: ['direction']
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - "#sound-dai-cells"
> + - "#address-cells"
> + - "#size-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/soc/qcom,apr.h>
> + #include <dt-bindings/sound/qcom,q6asm.h>
> +
> + apr {
> + compatible = "qcom,apr-v2";
> + qcom,domain = <APR_DOMAIN_ADSP>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + service@7 {
> + compatible = "qcom,q6asm";
> + reg = <APR_SVC_ASM>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +
> + dais {
> + compatible = "qcom,q6asm-dais";
> + iommus = <&apps_smmu 0x1821 0x0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #sound-dai-cells = <1>;
> +
> + dai@0 {
> + reg = <0>;
> + };
> +
> + dai@1 {
> + reg = <1>;
> + };
> +
> + dai@2 {
> + reg = <2>;
> + is-compress-dai;
> + direction = <1>;
> + };
> + };
> + };
> + };
> --
> 2.34.1
>
>
next prev parent reply other threads:[~2022-09-07 17:59 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-07 10:15 [PATCH v2 00/14] ASoC/qcom/arm64: Qualcomm ADSP DTS and binding fixes Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 01/14] arm64: dts: qcom: sdm630: align APR services node names with dtschema Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 02/14] arm64: dts: qcom: sdm845: " Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 03/14] arm64: dts: qcom: sm8250: " Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 04/14] arm64: dts: qcom: msm8996: fix APR services nodes Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 05/14] arm64: dts: qcom: sdm845: align dai node names with dtschema Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 06/14] arm64: dts: qcom: msm8996: " Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 07/14] arm64: dts: qcom: qrb5165-rb5: " Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 08/14] arm64: dts: qcom: sm8250: use generic name for LPASS clock controller Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 09/14] ASoC: dt-bindings:: qcom,q6asm: convert to dtschema Krzysztof Kozlowski
2022-09-07 17:57 ` Rob Herring [this message]
2022-09-07 17:57 ` Rob Herring
2022-09-08 9:05 ` Krzysztof Kozlowski
2022-09-08 9:05 ` Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 10/14] dt-bindings: soc: qcom: apr: correct service children Krzysztof Kozlowski
2022-09-07 18:01 ` Rob Herring
2022-09-07 18:01 ` Rob Herring
2022-09-07 10:15 ` [PATCH v2 11/14] ASoC: dt-bindings: qcom, q6dsp-lpass-ports: cleanup example Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 11/14] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: " Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 12/14] ASoC: dt-bindings: qcom, q6dsp-lpass-clocks: " Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 12/14] ASoC: dt-bindings: qcom,q6dsp-lpass-clocks: " Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 13/14] ASoC: dt-bindings: qcom, q6apm-dai: adjust indentation in example Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 13/14] ASoC: dt-bindings: qcom,q6apm-dai: " Krzysztof Kozlowski
2022-09-07 10:15 ` [PATCH v2 14/14] dt-bindings: soc: qcom: apr: add missing properties Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220907175759.GA3791463-robh@kernel.org \
--to=robh@kernel.org \
--cc=agross@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=srinivas.kandagatla@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.