All of lore.kernel.org
 help / color / mirror / Atom feed
From: Philippe Schenker <dev@pschenker.ch>
To: devicetree@vger.kernel.org
Cc: Philippe Schenker <philippe.schenker@toradex.com>,
	Fabio Estevam <festevam@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] arm: dts: colibri-imx6ull: keep peripherals disabled
Date: Wed,  5 Oct 2022 15:39:26 +0200	[thread overview]
Message-ID: <20221005133929.1243443-1-dev@pschenker.ch> (raw)

From: Philippe Schenker <philippe.schenker@toradex.com>

Toradex does provide device-tree overlays to enable certain evaluation
hardware. Keep the buses disabled by default to be enabled again with
overlays.

For customers including this device-tree this has also the advantage
that the hardware we want by default running does not automatically
enable signals on their end.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

 arch/arm/boot/dts/imx6ull-colibri.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 577a424b0e1d..a4429ba1f2ae 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -21,7 +21,7 @@ backlight: backlight {
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
 		power-supply = <&reg_3v3>;
 		pwms = <&pwm4 0 5000000 1>;
-		status = "okay";
+		status = "disabled";
 	};
 
 	gpio-keys {
@@ -42,7 +42,7 @@ panel_dpi: panel-dpi {
 		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
-		status = "okay";
+		status = "disabled";
 
 		port {
 			lcd_panel_in: endpoint {
@@ -159,7 +159,7 @@ &i2c1 {
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
+	status = "disabled";
 
 	/* Atmel maxtouch controller */
 	atmel_mxt_ts: touchscreen@4a {
@@ -202,6 +202,7 @@ ad7879_ts: touchscreen@2c {
 		adi,median-filter-size = /bits/ 8 <2>;
 		adi,averaging = /bits/ 8 <1>;
 		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
 	};
 };
 
@@ -209,6 +210,7 @@ &lcdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif_dat
 		     &pinctrl_lcdif_ctrl>;
+	status = "disabled";
 
 	port {
 		lcdif_out: endpoint {
-- 
2.37.3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Philippe Schenker <dev@pschenker.ch>
To: devicetree@vger.kernel.org
Cc: Philippe Schenker <philippe.schenker@toradex.com>,
	Fabio Estevam <festevam@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] arm: dts: colibri-imx6ull: keep peripherals disabled
Date: Wed,  5 Oct 2022 15:39:26 +0200	[thread overview]
Message-ID: <20221005133929.1243443-1-dev@pschenker.ch> (raw)

From: Philippe Schenker <philippe.schenker@toradex.com>

Toradex does provide device-tree overlays to enable certain evaluation
hardware. Keep the buses disabled by default to be enabled again with
overlays.

For customers including this device-tree this has also the advantage
that the hardware we want by default running does not automatically
enable signals on their end.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

 arch/arm/boot/dts/imx6ull-colibri.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 577a424b0e1d..a4429ba1f2ae 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -21,7 +21,7 @@ backlight: backlight {
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
 		power-supply = <&reg_3v3>;
 		pwms = <&pwm4 0 5000000 1>;
-		status = "okay";
+		status = "disabled";
 	};
 
 	gpio-keys {
@@ -42,7 +42,7 @@ panel_dpi: panel-dpi {
 		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
-		status = "okay";
+		status = "disabled";
 
 		port {
 			lcd_panel_in: endpoint {
@@ -159,7 +159,7 @@ &i2c1 {
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
+	status = "disabled";
 
 	/* Atmel maxtouch controller */
 	atmel_mxt_ts: touchscreen@4a {
@@ -202,6 +202,7 @@ ad7879_ts: touchscreen@2c {
 		adi,median-filter-size = /bits/ 8 <2>;
 		adi,averaging = /bits/ 8 <1>;
 		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
 	};
 };
 
@@ -209,6 +210,7 @@ &lcdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif_dat
 		     &pinctrl_lcdif_ctrl>;
+	status = "disabled";
 
 	port {
 		lcdif_out: endpoint {
-- 
2.37.3


             reply	other threads:[~2022-10-05 13:43 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-05 13:39 Philippe Schenker [this message]
2022-10-05 13:39 ` [PATCH 1/4] arm: dts: colibri-imx6ull: keep peripherals disabled Philippe Schenker
2022-10-05 13:39 ` [PATCH 2/4] arm: dts: colibri-imx6ull: enable default peripherals Philippe Schenker
2022-10-05 13:39   ` Philippe Schenker
2022-10-05 13:39 ` [PATCH 3/4] arm: dts: colibri-imx6ull: add -hog to gpio hogs Philippe Schenker
2022-10-05 13:39   ` Philippe Schenker
2022-10-05 13:39 ` [PATCH 4/4] arm: dts: colibri-imx7: fix confusing naming Philippe Schenker
2022-10-05 13:39   ` Philippe Schenker
2022-10-29  1:03 ` [PATCH 1/4] arm: dts: colibri-imx6ull: keep peripherals disabled Shawn Guo
2022-10-29  1:03   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221005133929.1243443-1-dev@pschenker.ch \
    --to=dev@pschenker.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=philippe.schenker@toradex.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.