All of lore.kernel.org
 help / color / mirror / Atom feed
From: Philippe Schenker <dev@pschenker.ch>
To: devicetree@vger.kernel.org
Cc: Philippe Schenker <philippe.schenker@toradex.com>,
	Fabio Estevam <festevam@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 4/4] arm: dts: colibri-imx7: fix confusing naming
Date: Wed,  5 Oct 2022 15:39:29 +0200	[thread overview]
Message-ID: <20221005133929.1243443-4-dev@pschenker.ch> (raw)
In-Reply-To: <20221005133929.1243443-1-dev@pschenker.ch>

From: Philippe Schenker <philippe.schenker@toradex.com>

fix the naming of node-name vs label-name to the correct one, that is
the label was always correct.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>

---

 arch/arm/boot/dts/imx7-colibri.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index a8c31ee65623..3bea7549b762 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -652,7 +652,7 @@ &iomuxc {
 	 * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3.
 	 * Don't use them simultaneously.
 	 */
-	pinctrl_atmel_adapter: atmelconnectorgrp {
+	pinctrl_atmel_adapter: atmeladaptergrp {
 		fsl,pins = <
 			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74 /* SODIMM 28 / INT */
 			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
@@ -660,7 +660,7 @@ MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
 	};
 
 	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
-	pinctrl_atmel_connector: atmeladaptergrp {
+	pinctrl_atmel_connector: atmelconnectorgrp {
 		fsl,pins = <
 			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 / RST */
 			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 / INT */
-- 
2.37.3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Philippe Schenker <dev@pschenker.ch>
To: devicetree@vger.kernel.org
Cc: Philippe Schenker <philippe.schenker@toradex.com>,
	Fabio Estevam <festevam@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 4/4] arm: dts: colibri-imx7: fix confusing naming
Date: Wed,  5 Oct 2022 15:39:29 +0200	[thread overview]
Message-ID: <20221005133929.1243443-4-dev@pschenker.ch> (raw)
In-Reply-To: <20221005133929.1243443-1-dev@pschenker.ch>

From: Philippe Schenker <philippe.schenker@toradex.com>

fix the naming of node-name vs label-name to the correct one, that is
the label was always correct.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>

---

 arch/arm/boot/dts/imx7-colibri.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index a8c31ee65623..3bea7549b762 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -652,7 +652,7 @@ &iomuxc {
 	 * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3.
 	 * Don't use them simultaneously.
 	 */
-	pinctrl_atmel_adapter: atmelconnectorgrp {
+	pinctrl_atmel_adapter: atmeladaptergrp {
 		fsl,pins = <
 			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74 /* SODIMM 28 / INT */
 			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
@@ -660,7 +660,7 @@ MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
 	};
 
 	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
-	pinctrl_atmel_connector: atmeladaptergrp {
+	pinctrl_atmel_connector: atmelconnectorgrp {
 		fsl,pins = <
 			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 / RST */
 			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 / INT */
-- 
2.37.3


  parent reply	other threads:[~2022-10-05 13:42 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-05 13:39 [PATCH 1/4] arm: dts: colibri-imx6ull: keep peripherals disabled Philippe Schenker
2022-10-05 13:39 ` Philippe Schenker
2022-10-05 13:39 ` [PATCH 2/4] arm: dts: colibri-imx6ull: enable default peripherals Philippe Schenker
2022-10-05 13:39   ` Philippe Schenker
2022-10-05 13:39 ` [PATCH 3/4] arm: dts: colibri-imx6ull: add -hog to gpio hogs Philippe Schenker
2022-10-05 13:39   ` Philippe Schenker
2022-10-05 13:39 ` Philippe Schenker [this message]
2022-10-05 13:39   ` [PATCH 4/4] arm: dts: colibri-imx7: fix confusing naming Philippe Schenker
2022-10-29  1:03 ` [PATCH 1/4] arm: dts: colibri-imx6ull: keep peripherals disabled Shawn Guo
2022-10-29  1:03   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221005133929.1243443-4-dev@pschenker.ch \
    --to=dev@pschenker.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=philippe.schenker@toradex.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.