From: Anup Patel <apatel@ventanamicro.com>
To: Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>
Cc: Atish Patra <atishp@atishpatra.org>,
Heiko Stuebner <heiko@sntech.de>, Arnd Bergmann <arnd@arndb.de>,
Anup Patel <anup@brainfault.org>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
Andrew Jones <ajones@ventanamicro.com>,
kernel test robot <lkp@intel.com>,
Anup Patel <apatel@ventanamicro.com>,
Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH v5 1/4] RISC-V: Fix compilation without RISCV_ISA_ZICBOM
Date: Thu, 20 Oct 2022 13:28:43 +0530 [thread overview]
Message-ID: <20221020075846.305576-2-apatel@ventanamicro.com> (raw)
In-Reply-To: <20221020075846.305576-1-apatel@ventanamicro.com>
From: Andrew Jones <ajones@ventanamicro.com>
riscv_cbom_block_size and riscv_init_cbom_blocksize() should always
be available and riscv_init_cbom_blocksize() should always be
invoked, even when compiling without RISCV_ISA_ZICBOM enabled. This
is because disabling RISCV_ISA_ZICBOM means "don't use zicbom
instructions in the kernel" not "pretend there isn't zicbom, even
when there is". When zicbom is available, whether the kernel enables
its use with RISCV_ISA_ZICBOM or not, KVM will offer it to guests.
Ensure we can build KVM and that the block size is initialized even
when compiling without RISCV_ISA_ZICBOM.
Fixes: 8f7e001e0325 ("RISC-V: Clean up the Zicbom block size probing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
---
arch/riscv/include/asm/cacheflush.h | 8 ------
arch/riscv/mm/cacheflush.c | 38 ++++++++++++++++++++++++++
arch/riscv/mm/dma-noncoherent.c | 41 -----------------------------
3 files changed, 38 insertions(+), 49 deletions(-)
diff --git a/arch/riscv/include/asm/cacheflush.h b/arch/riscv/include/asm/cacheflush.h
index 8a5c246b0a21..f6fbe7042f1c 100644
--- a/arch/riscv/include/asm/cacheflush.h
+++ b/arch/riscv/include/asm/cacheflush.h
@@ -42,16 +42,8 @@ void flush_icache_mm(struct mm_struct *mm, bool local);
#endif /* CONFIG_SMP */
-/*
- * The T-Head CMO errata internally probe the CBOM block size, but otherwise
- * don't depend on Zicbom.
- */
extern unsigned int riscv_cbom_block_size;
-#ifdef CONFIG_RISCV_ISA_ZICBOM
void riscv_init_cbom_blocksize(void);
-#else
-static inline void riscv_init_cbom_blocksize(void) { }
-#endif
#ifdef CONFIG_RISCV_DMA_NONCOHERENT
void riscv_noncoherent_supported(void);
diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c
index 6cb7d96ad9c7..57b40a350420 100644
--- a/arch/riscv/mm/cacheflush.c
+++ b/arch/riscv/mm/cacheflush.c
@@ -3,6 +3,7 @@
* Copyright (C) 2017 SiFive
*/
+#include <linux/of.h>
#include <asm/cacheflush.h>
#ifdef CONFIG_SMP
@@ -86,3 +87,40 @@ void flush_icache_pte(pte_t pte)
flush_icache_all();
}
#endif /* CONFIG_MMU */
+
+unsigned int riscv_cbom_block_size;
+EXPORT_SYMBOL_GPL(riscv_cbom_block_size);
+
+void riscv_init_cbom_blocksize(void)
+{
+ struct device_node *node;
+ unsigned long cbom_hartid;
+ u32 val, probed_block_size;
+ int ret;
+
+ probed_block_size = 0;
+ for_each_of_cpu_node(node) {
+ unsigned long hartid;
+
+ ret = riscv_of_processor_hartid(node, &hartid);
+ if (ret)
+ continue;
+
+ /* set block-size for cbom extension if available */
+ ret = of_property_read_u32(node, "riscv,cbom-block-size", &val);
+ if (ret)
+ continue;
+
+ if (!probed_block_size) {
+ probed_block_size = val;
+ cbom_hartid = hartid;
+ } else {
+ if (probed_block_size != val)
+ pr_warn("cbom-block-size mismatched between harts %lu and %lu\n",
+ cbom_hartid, hartid);
+ }
+ }
+
+ if (probed_block_size)
+ riscv_cbom_block_size = probed_block_size;
+}
diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
index b0add983530a..d919efab6eba 100644
--- a/arch/riscv/mm/dma-noncoherent.c
+++ b/arch/riscv/mm/dma-noncoherent.c
@@ -8,13 +8,8 @@
#include <linux/dma-direct.h>
#include <linux/dma-map-ops.h>
#include <linux/mm.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
#include <asm/cacheflush.h>
-unsigned int riscv_cbom_block_size;
-EXPORT_SYMBOL_GPL(riscv_cbom_block_size);
-
static bool noncoherent_supported;
void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
@@ -77,42 +72,6 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
dev->dma_coherent = coherent;
}
-#ifdef CONFIG_RISCV_ISA_ZICBOM
-void riscv_init_cbom_blocksize(void)
-{
- struct device_node *node;
- unsigned long cbom_hartid;
- u32 val, probed_block_size;
- int ret;
-
- probed_block_size = 0;
- for_each_of_cpu_node(node) {
- unsigned long hartid;
-
- ret = riscv_of_processor_hartid(node, &hartid);
- if (ret)
- continue;
-
- /* set block-size for cbom extension if available */
- ret = of_property_read_u32(node, "riscv,cbom-block-size", &val);
- if (ret)
- continue;
-
- if (!probed_block_size) {
- probed_block_size = val;
- cbom_hartid = hartid;
- } else {
- if (probed_block_size != val)
- pr_warn("cbom-block-size mismatched between harts %lu and %lu\n",
- cbom_hartid, hartid);
- }
- }
-
- if (probed_block_size)
- riscv_cbom_block_size = probed_block_size;
-}
-#endif
-
void riscv_noncoherent_supported(void)
{
WARN(!riscv_cbom_block_size,
--
2.34.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Anup Patel <apatel@ventanamicro.com>
To: Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>
Cc: Atish Patra <atishp@atishpatra.org>,
Heiko Stuebner <heiko@sntech.de>, Arnd Bergmann <arnd@arndb.de>,
Anup Patel <anup@brainfault.org>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
Andrew Jones <ajones@ventanamicro.com>,
kernel test robot <lkp@intel.com>,
Anup Patel <apatel@ventanamicro.com>,
Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH v5 1/4] RISC-V: Fix compilation without RISCV_ISA_ZICBOM
Date: Thu, 20 Oct 2022 13:28:43 +0530 [thread overview]
Message-ID: <20221020075846.305576-2-apatel@ventanamicro.com> (raw)
In-Reply-To: <20221020075846.305576-1-apatel@ventanamicro.com>
From: Andrew Jones <ajones@ventanamicro.com>
riscv_cbom_block_size and riscv_init_cbom_blocksize() should always
be available and riscv_init_cbom_blocksize() should always be
invoked, even when compiling without RISCV_ISA_ZICBOM enabled. This
is because disabling RISCV_ISA_ZICBOM means "don't use zicbom
instructions in the kernel" not "pretend there isn't zicbom, even
when there is". When zicbom is available, whether the kernel enables
its use with RISCV_ISA_ZICBOM or not, KVM will offer it to guests.
Ensure we can build KVM and that the block size is initialized even
when compiling without RISCV_ISA_ZICBOM.
Fixes: 8f7e001e0325 ("RISC-V: Clean up the Zicbom block size probing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
---
arch/riscv/include/asm/cacheflush.h | 8 ------
arch/riscv/mm/cacheflush.c | 38 ++++++++++++++++++++++++++
arch/riscv/mm/dma-noncoherent.c | 41 -----------------------------
3 files changed, 38 insertions(+), 49 deletions(-)
diff --git a/arch/riscv/include/asm/cacheflush.h b/arch/riscv/include/asm/cacheflush.h
index 8a5c246b0a21..f6fbe7042f1c 100644
--- a/arch/riscv/include/asm/cacheflush.h
+++ b/arch/riscv/include/asm/cacheflush.h
@@ -42,16 +42,8 @@ void flush_icache_mm(struct mm_struct *mm, bool local);
#endif /* CONFIG_SMP */
-/*
- * The T-Head CMO errata internally probe the CBOM block size, but otherwise
- * don't depend on Zicbom.
- */
extern unsigned int riscv_cbom_block_size;
-#ifdef CONFIG_RISCV_ISA_ZICBOM
void riscv_init_cbom_blocksize(void);
-#else
-static inline void riscv_init_cbom_blocksize(void) { }
-#endif
#ifdef CONFIG_RISCV_DMA_NONCOHERENT
void riscv_noncoherent_supported(void);
diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c
index 6cb7d96ad9c7..57b40a350420 100644
--- a/arch/riscv/mm/cacheflush.c
+++ b/arch/riscv/mm/cacheflush.c
@@ -3,6 +3,7 @@
* Copyright (C) 2017 SiFive
*/
+#include <linux/of.h>
#include <asm/cacheflush.h>
#ifdef CONFIG_SMP
@@ -86,3 +87,40 @@ void flush_icache_pte(pte_t pte)
flush_icache_all();
}
#endif /* CONFIG_MMU */
+
+unsigned int riscv_cbom_block_size;
+EXPORT_SYMBOL_GPL(riscv_cbom_block_size);
+
+void riscv_init_cbom_blocksize(void)
+{
+ struct device_node *node;
+ unsigned long cbom_hartid;
+ u32 val, probed_block_size;
+ int ret;
+
+ probed_block_size = 0;
+ for_each_of_cpu_node(node) {
+ unsigned long hartid;
+
+ ret = riscv_of_processor_hartid(node, &hartid);
+ if (ret)
+ continue;
+
+ /* set block-size for cbom extension if available */
+ ret = of_property_read_u32(node, "riscv,cbom-block-size", &val);
+ if (ret)
+ continue;
+
+ if (!probed_block_size) {
+ probed_block_size = val;
+ cbom_hartid = hartid;
+ } else {
+ if (probed_block_size != val)
+ pr_warn("cbom-block-size mismatched between harts %lu and %lu\n",
+ cbom_hartid, hartid);
+ }
+ }
+
+ if (probed_block_size)
+ riscv_cbom_block_size = probed_block_size;
+}
diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
index b0add983530a..d919efab6eba 100644
--- a/arch/riscv/mm/dma-noncoherent.c
+++ b/arch/riscv/mm/dma-noncoherent.c
@@ -8,13 +8,8 @@
#include <linux/dma-direct.h>
#include <linux/dma-map-ops.h>
#include <linux/mm.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
#include <asm/cacheflush.h>
-unsigned int riscv_cbom_block_size;
-EXPORT_SYMBOL_GPL(riscv_cbom_block_size);
-
static bool noncoherent_supported;
void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
@@ -77,42 +72,6 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
dev->dma_coherent = coherent;
}
-#ifdef CONFIG_RISCV_ISA_ZICBOM
-void riscv_init_cbom_blocksize(void)
-{
- struct device_node *node;
- unsigned long cbom_hartid;
- u32 val, probed_block_size;
- int ret;
-
- probed_block_size = 0;
- for_each_of_cpu_node(node) {
- unsigned long hartid;
-
- ret = riscv_of_processor_hartid(node, &hartid);
- if (ret)
- continue;
-
- /* set block-size for cbom extension if available */
- ret = of_property_read_u32(node, "riscv,cbom-block-size", &val);
- if (ret)
- continue;
-
- if (!probed_block_size) {
- probed_block_size = val;
- cbom_hartid = hartid;
- } else {
- if (probed_block_size != val)
- pr_warn("cbom-block-size mismatched between harts %lu and %lu\n",
- cbom_hartid, hartid);
- }
- }
-
- if (probed_block_size)
- riscv_cbom_block_size = probed_block_size;
-}
-#endif
-
void riscv_noncoherent_supported(void)
{
WARN(!riscv_cbom_block_size,
--
2.34.1
next prev parent reply other threads:[~2022-10-20 7:59 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-20 7:58 [PATCH v5 0/4] Add PMEM support for RISC-V Anup Patel
2022-10-20 7:58 ` Anup Patel
2022-10-20 7:58 ` Anup Patel [this message]
2022-10-20 7:58 ` [PATCH v5 1/4] RISC-V: Fix compilation without RISCV_ISA_ZICBOM Anup Patel
2022-10-21 6:48 ` Anup Patel
2022-10-21 6:48 ` Anup Patel
2022-10-20 7:58 ` [PATCH v5 2/4] RISC-V: Fix MEMREMAP_WB for systems with Svpbmt Anup Patel
2022-10-20 7:58 ` Anup Patel
2022-10-24 19:54 ` Conor Dooley
2022-10-24 19:54 ` Conor Dooley
2022-10-20 7:58 ` [PATCH v5 3/4] RISC-V: Implement arch specific PMEM APIs Anup Patel
2022-10-20 7:58 ` Anup Patel
2022-10-24 19:52 ` Conor Dooley
2022-10-24 19:52 ` Conor Dooley
2022-11-14 9:02 ` Anup Patel
2022-11-14 9:02 ` Anup Patel
2022-10-20 7:58 ` [PATCH v5 4/4] RISC-V: Enable PMEM drivers Anup Patel
2022-10-20 7:58 ` Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221020075846.305576-2-apatel@ventanamicro.com \
--to=apatel@ventanamicro.com \
--cc=ajones@ventanamicro.com \
--cc=anup@brainfault.org \
--cc=arnd@arndb.de \
--cc=atishp@atishpatra.org \
--cc=conor.dooley@microchip.com \
--cc=heiko@sntech.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=lkp@intel.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.