From: Thomas Petazzoni via buildroot <buildroot@buildroot.org>
To: buildroot@buildroot.org
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [Buildroot] [PATCH 02/21] configs/arm_juno: remove defconfig
Date: Tue, 1 Nov 2022 23:03:34 +0100 [thread overview]
Message-ID: <20221101220354.403933-3-thomas.petazzoni@bootlin.com> (raw)
In-Reply-To: <20221101220354.403933-1-thomas.petazzoni@bootlin.com>
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234498972
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 4 -
board/arm/juno/linux-juno-defconfig | 169 ----------------------------
board/arm/juno/readme.txt | 134 ----------------------
configs/arm_juno_defconfig | 23 ----
4 files changed, 330 deletions(-)
delete mode 100644 board/arm/juno/linux-juno-defconfig
delete mode 100644 board/arm/juno/readme.txt
delete mode 100644 configs/arm_juno_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 15aa440c72..3e03dd51f5 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1226,10 +1226,6 @@ F: support/testing/tests/package/test_python_scipy.py
N: Gustavo Heinz <gustavo@gsthnz.com>
F: package/python-m2crypto/
-N: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
-F: configs/arm_juno_defconfig
-F: board/arm/juno/
-
N: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
F: board/terasic/de10nano_cyclone5/
F: configs/terasic_de10nano_cyclone5_defconfig
diff --git a/board/arm/juno/linux-juno-defconfig b/board/arm/juno/linux-juno-defconfig
deleted file mode 100644
index 64598d21a1..0000000000
--- a/board/arm/juno/linux-juno-defconfig
+++ /dev/null
@@ -1,169 +0,0 @@
-CONFIG_SMP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_PROFILING=y
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NR_CPUS=6
-CONFIG_PREEMPT=y
-CONFIG_KSM=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_CMA=y
-CONFIG_CMDLINE="console=ttyAMA0"
-CONFIG_COMPAT=y
-CONFIG_CPU_IDLE=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
-CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
-CONFIG_ARM_DT_BL_CPUFREQ=y
-CONFIG_ARM_SCPI_CPUFREQ=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_BPF_JIT=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_AHCI_XGENE=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_OF_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=y
-CONFIG_SKY2=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_SLAVE=y
-CONFIG_SPI=y
-CONFIG_SPI_PL022=y
-CONFIG_PTP_1588_CLOCK=m
-CONFIG_GPIO_PL061=y
-CONFIG_GPIO_XGENE=y
-CONFIG_POWER_RESET_XGENE=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_VEXPRESS=m
-CONFIG_DRM=y
-CONFIG_DRM_I2C_NXP_TDA998X=y
-CONFIG_DRM_ARM=y
-CONFIG_DRM_HDLCD=y
-CONFIG_DRM_VIRTUAL_HDLCD=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_ISP1760=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_EFI=y
-CONFIG_RTC_DRV_PL030=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_DMADEVICES=y
-CONFIG_PL330_DMA=y
-CONFIG_COMMON_CLK_SCPI=y
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_MAILBOX=y
-CONFIG_ARM_MHU=y
-CONFIG_PHY_XGENE=y
-CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
-CONFIG_QUOTA=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_EFIVAR_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_DESIGNWARE_I2S=y
-CONFIG_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
diff --git a/board/arm/juno/readme.txt b/board/arm/juno/readme.txt
deleted file mode 100644
index b292d9636d..0000000000
--- a/board/arm/juno/readme.txt
+++ /dev/null
@@ -1,134 +0,0 @@
-ARM Juno r1/r0
-
-Intro
-=====
-
-These instructions apply to all models of the ARM Juno:
- - Juno r0 (does not support PCIe)
- - Juno r1 (supports PCIe)
- - Juno r2 (Big Cluster with A72)
-
-Buildroot will generate the kernel image, device tree blob, bootloader binaries
-and a minimal root filesystem.
-
-How to build it
-===============
-
-Configure Buildroot
--------------------
-
-Configuring Buildroot is pretty simple, just execute:
-
- $ make arm_juno_defconfig
-
-Build the rootfs, kernel and DTB
---------------------------------
-
-Note: you will need to have access to the network, since Buildroot will
-download the packages' sources.
-
-You may now build your rootfs with:
-
- $ make
-
-(This may take a while)
-
-Result of the build
--------------------
-
-After building, you should obtain this tree:
-
- output/images/
- +-- rootfs.tar
- +-- juno.dtb (if Juno r0 is used)
- +-- juno-r1.dtb (if Juno r1 is used)
- +-- juno-r2.dtb (if Juno r2 is used)
- +-- Image
- +-- bl1.bin
- +-- bl2.bin
- +-- bl2u.bin
- +-- bl31.bin
- +-- fip.bin
- +-- scp-fw.bin
- +-- u-boot.bin
-
-Preparing your rootfs
-======================
-
-Format your pen drive as a ext3 filesystem by executing:
-
- $ mkfs.ext3 /dev/<your device>
-
-Preparing your rootfs
-======================
-
-Format your pen drive as a ext3 filesystem by executing:
-
- $ mkfs.ext3 /dev/<your device>
-
-Installing your rootfs
-======================
-
-After mounting the pen drive please execute the following:
-
- $ sudo tar -xvf output/images/rootfs.tar -C <pen drive mount path>
-
-When completed make sure to unmount the device:
-
- $ umount <pen drive mount path>
-
-Insert the pen drive in one of the ARM Juno' USB type A connectors.
-
-Configure *.dtb in the boot configuration for Juno r0
-=====================================================
-
-SITE1/HBI0262B/images.txt
-.....
-NOR3UPDATE: AUTO ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x00C00000 ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno.dtb ;Image File Name
-NOR3NAME: board.dtb ;Specify Image name to preserve file extension
-NOR3LOAD: 00000000 ;Image Load Address
-NOR3ENTRY: 00000000 ;Image Entry Point
-......
-
-Configure *.dtb in the boot configuration for Juno r1
-=====================================================
-
-SITE1/HBI0262C/images.txt
-......
-NOR3UPDATE: AUTO ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x00C00000 ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-r1.dtb ;Image File Name
-NOR3NAME: board.dtb ;Specify target filename to preserve file extension
-NOR3LOAD: 00000000 ;Image Load Address
-NOR3ENTRY: 00000000 ;Image Entry Point
-......
-
-Configure *.dtb in the boot configuration for Juno r2
-=====================================================
-
-SITE1/HBI0262D/images.txt
-......
-NOR3UPDATE: AUTO ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x02000000 ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-r2.dtb ;Image File Name
-NOR3NAME: board.dtb ;Specify target filename to preserve file extension
-NOR3LOAD: 00000000 ;Image Load Address
-NOR3ENTRY: 00000000 ;Image Entry Point
-......
-
-Installing kernel image and DTB
-===============================
-
-1. Connect to the ARM Juno UART0 and execute USB_ON in the terminal
-2. Connect a USB cable between your PC and ARM Juno USB type B connector
- A mass storage device should appear in your desktop.
-3. Open the software/ folder
-4. Copy the 'Image' file to software/
-5. Copy the 'juno-r1.dtb' (r1), 'juno.dtb' (r0) or juno-r2.dtb (r2) file to software/
-6. Copy the bootloader binaries (bl1.bin and fip.bin) to software/
-7. Press the red button in the front pannel of ARM Juno
-
-At this time, the board will erase the Flash entry for each new item and
-replace it with the lastest ones.
diff --git a/configs/arm_juno_defconfig b/configs/arm_juno_defconfig
deleted file mode 100644
index 5832986779..0000000000
--- a/configs/arm_juno_defconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-BR2_aarch64=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
-BR2_TARGET_GENERIC_HOSTNAME="juno-buildroot"
-BR2_TARGET_GENERIC_ISSUE="Welcome to SNPS Juno by Buildroot"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/arm/juno/linux-juno-defconfig"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="arm/juno arm/juno-r1 arm/juno-r2"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v1.4"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="juno"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="vexpress_aemv8a_juno"
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.03"
-BR2_TARGET_VEXPRESS_FIRMWARE=y
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
next prev parent reply other threads:[~2022-11-01 22:04 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 01/21] configs/amarula_a64_relic: remove defconfig Thomas Petazzoni via buildroot
2022-11-01 22:03 ` Thomas Petazzoni via buildroot [this message]
2022-11-01 22:03 ` [Buildroot] [PATCH 03/21] configs/bananapi_m1: " Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 04/21] configs/bananapi_m1_plus: " Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 05/21] configs/bananapi_m2_plus: " Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 06/21] configs/bananapi_m64: " Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 07/21] configs/friendlyarm_nanopc_t4: " Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 08/21] configs/friendlyarm_nanopi_a64: " Thomas Petazzoni via buildroot
2022-11-01 22:18 ` [Buildroot] [PATCH 09/21] configs/friendlyarm_nanopi_m1: " Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 10/21] " Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 11/21] configs/friendlyarm_nanopi_m4: " Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 12/21] configs/friendlyarm_nanopi_neo2: " Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 13/21] configs/friendlyarm_nanopi_neo4: " Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 14/21] configs/friendlyarm_nanopi_neo_plus2: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 15/21] configs/friendlyarm_nanopi_r1: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 16/21] configs/orangepi_pc2: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 17/21] configs/orangepi_plus: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 18/21] configs/orangepi_prime: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 19/21] configs/orangepi_rk3399: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 20/21] configs/orangepi_win: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 21/21] configs/pine64: " Thomas Petazzoni via buildroot
2022-11-02 11:44 ` Michael Nosthoff via buildroot
2022-11-07 21:20 ` [Buildroot] [PATCH 00/21] First batch of defconfig removals Yann E. MORIN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221101220354.403933-3-thomas.petazzoni@bootlin.com \
--to=buildroot@buildroot.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.