[Buildroot] [PATCH 09/21] configs/friendlyarm_nanopi_m1: remove defconfig

From: Thomas Petazzoni via buildroot <buildroot@buildroot.org>
To: buildroot@buildroot.org
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [Buildroot] [PATCH 09/21] configs/friendlyarm_nanopi_m1: remove defconfig
Date: Tue,  1 Nov 2022 23:18:49 +0100	[thread overview]
Message-ID: <20221101221849.406974-1-thomas.petazzoni@bootlin.com> (raw)
In-Reply-To: <20221101220354.403933-1-thomas.petazzoni@bootlin.com>

This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.

This defconfig did not even have an entry in the DEVELOPERS file.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499050

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
 board/friendlyarm/nanopi-m1/boot.cmd     |  8 -----
 board/friendlyarm/nanopi-m1/genimage.cfg | 37 -------------------
 board/friendlyarm/nanopi-m1/readme.txt   | 29 ---------------
 configs/friendlyarm_nanopi_m1_defconfig  | 45 ------------------------
 4 files changed, 119 deletions(-)
 delete mode 100644 board/friendlyarm/nanopi-m1/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-m1/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-m1/readme.txt
 delete mode 100644 configs/friendlyarm_nanopi_m1_defconfig

diff --git a/board/friendlyarm/nanopi-m1/boot.cmd b/board/friendlyarm/nanopi-m1/boot.cmd
deleted file mode 100644
index b4d612ede7..0000000000
--- a/board/friendlyarm/nanopi-m1/boot.cmd
+++ /dev/null
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-m1.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/friendlyarm/nanopi-m1/genimage.cfg b/board/friendlyarm/nanopi-m1/genimage.cfg
deleted file mode 100644
index 3b2b82ce96..0000000000
--- a/board/friendlyarm/nanopi-m1/genimage.cfg
+++ /dev/null
@@ -1,37 +0,0 @@
-# Minimal SD card image for the NanoPi M1
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun8i-h3-nanopi-m1.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}
diff --git a/board/friendlyarm/nanopi-m1/readme.txt b/board/friendlyarm/nanopi-m1/readme.txt
deleted file mode 100644
index 6a34c4239d..0000000000
--- a/board/friendlyarm/nanopi-m1/readme.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-NanoPi M1
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the NanoPi M1. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
-    $ make friendlyarm_nanopi_m1_defconfig
-
-Compile everything and build the SD card image:
-
-    $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
diff --git a/configs/friendlyarm_nanopi_m1_defconfig b/configs/friendlyarm_nanopi_m1_defconfig
deleted file mode 100644
index 18cfcb261e..0000000000
--- a/configs/friendlyarm_nanopi_m1_defconfig
+++ /dev/null
@@ -1,45 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# System configuration
-BR2_TARGET_GENERIC_HOSTNAME="nanopi-m1"
-BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi M1"
-
-# Bootloaders
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_m1"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-m1/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-nanopi-m1"
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-m1/genimage.cfg"
-# BR2_TARGET_ROOTFS_TAR is not set
-
-# Additional tools
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-- 
2.37.3

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
