[Buildroot] [PATCH 13/21] configs/friendlyarm_nanopi_neo4: remove defconfig

[Thomas Petazzoni via buildroot <buildroot@buildroot.org>]

This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499054

Cc: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
 DEVELOPERS                                  |  2 -
 board/friendlyarm/nanopi-neo4/extlinux.conf |  4 --
 board/friendlyarm/nanopi-neo4/genimage.cfg  | 22 ---------
 board/friendlyarm/nanopi-neo4/post-build.sh |  5 --
 board/friendlyarm/nanopi-neo4/readme.txt    | 53 --------------------
 configs/friendlyarm_nanopi_neo4_defconfig   | 55 ---------------------
 6 files changed, 141 deletions(-)
 delete mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg
 delete mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh
 delete mode 100644 board/friendlyarm/nanopi-neo4/readme.txt
 delete mode 100644 configs/friendlyarm_nanopi_neo4_defconfig

diff --git a/DEVELOPERS b/DEVELOPERS
index a4bfad30ce..18355a444e 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1899,8 +1899,6 @@ F:	utils/config
 F:	utils/diffconfig
 
 N:	Marek Belisko <marek.belisko@open-nandra.com>
-F:	board/friendlyarm/nanopi-neo4/
-F:	configs/friendlyarm_nanopi_neo4_defconfig
 F:	package/libatasmart/
 F:	package/polkit/
 F:	package/sg3_utils/
diff --git a/board/friendlyarm/nanopi-neo4/extlinux.conf b/board/friendlyarm/nanopi-neo4/extlinux.conf
deleted file mode 100644
index 91eef67fb9..0000000000
--- a/board/friendlyarm/nanopi-neo4/extlinux.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-label NanoPi Neo4 linux
-  kernel /boot/Image
-  devicetree /boot/rk3399-nanopi-neo4.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
diff --git a/board/friendlyarm/nanopi-neo4/genimage.cfg b/board/friendlyarm/nanopi-neo4/genimage.cfg
deleted file mode 100644
index 966c869273..0000000000
--- a/board/friendlyarm/nanopi-neo4/genimage.cfg
+++ /dev/null
@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 8M
-		size = 30M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
diff --git a/board/friendlyarm/nanopi-neo4/post-build.sh b/board/friendlyarm/nanopi-neo4/post-build.sh
deleted file mode 100755
index 1f5ff6a611..0000000000
--- a/board/friendlyarm/nanopi-neo4/post-build.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/friendlyarm/nanopi-neo4/readme.txt b/board/friendlyarm/nanopi-neo4/readme.txt
deleted file mode 100644
index 7c04a52806..0000000000
--- a/board/friendlyarm/nanopi-neo4/readme.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Intro
-=====
-
-NanoPi Neo4 is a RK3399 SoC based ARM64 board.
-
-
-Official wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO4
-Mainline wiki: https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/neo4.html
-
-Build
-=====
-
-Run NanoPi Neo4 configuration
-
-  $ make friendlyarm_nanopi_neo4_defconfig
-
-To build, run make comamnd.
-
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.bin
-├── bl31.elf
-├── Image
-├── rk3399-nanopi-neo4.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-├── u-boot.itb
-├── u-boot-spl-dtb.bin
-├── u-boot-tpl-dtb.bin
-├── u-boot-tpl-dtb.img
-└── u-boot-tpl-spl-dtb.img
-
-Creating bootable SD card:
-=========================
-
-Simply invoke (as root)
-
-  # dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
---------------
-
-Baudrate for this board is 1500000
diff --git a/configs/friendlyarm_nanopi_neo4_defconfig b/configs/friendlyarm_nanopi_neo4_defconfig
deleted file mode 100644
index a11872ef2a..0000000000
--- a/configs/friendlyarm_nanopi_neo4_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-# Architecture
-BR2_aarch64=y
-BR2_cortex_a72_a53=y
-
-# Linux headers same as kernel, a 5.4 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-neo4-rk3399"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.18"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopi-neo4"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_HOSTNAME="NanoPi Neo4"
-BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPi Neo4!"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="70M"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo4/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo4/post-build.sh"
-- 
2.37.3

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot