From: Matt Ranostay <mranostay@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>
Subject: [PATCH v5 0/8] J721S2: Add support for additional IPs
Date: Wed, 2 Nov 2022 21:41:17 -0700 [thread overview]
Message-ID: <20221103044125.172864-1-mranostay@ti.com> (raw)
The following series of patches add support for the following
on J721S2 common processor board,
- USB
- SerDes
- OSPI
- PCIe
Changes from v1:
* Resolve issues with dt schema reporting
* Minor changes related to consistency on node naming and value
Changes from v2:
* Added PCIe RC + EP enablement patchsets
* Added device-id for j722s2 PCIe host in dt documentation
* Reworked SERDES + WIZ enablement patchset to use properies for clocks
defines versus entire devicetree nodes. Results in cleaner code that
doesn't break dt-schema or the driver functionality.
Changes from v3:
* Rebased changes on top of '[PATCH 00/12] TI J7x Disable Incomplete DT Nodes'
* Removed "dt-bindings: PCI: Add host mode device-id for j721s2 platform" patch and
send it own series to avoid a dependency that would hold up other patches in this
series
Changes from v4:
* Add my Signed-off-by lines to all patchsets
Aswath Govindraju (7):
arm64: dts: ti: k3-j721s2-main: Add support for USB
arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0
arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support
arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes
arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe
Matt Ranostay (1):
arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node
.../dts/ti/k3-j721s2-common-proc-board.dts | 92 +++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 156 ++++++++++++++++++
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 42 +++++
4 files changed, 330 insertions(+)
--
2.38.GIT
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Matt Ranostay <mranostay@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>
Subject: [PATCH v5 0/8] J721S2: Add support for additional IPs
Date: Wed, 2 Nov 2022 21:41:17 -0700 [thread overview]
Message-ID: <20221103044125.172864-1-mranostay@ti.com> (raw)
The following series of patches add support for the following
on J721S2 common processor board,
- USB
- SerDes
- OSPI
- PCIe
Changes from v1:
* Resolve issues with dt schema reporting
* Minor changes related to consistency on node naming and value
Changes from v2:
* Added PCIe RC + EP enablement patchsets
* Added device-id for j722s2 PCIe host in dt documentation
* Reworked SERDES + WIZ enablement patchset to use properies for clocks
defines versus entire devicetree nodes. Results in cleaner code that
doesn't break dt-schema or the driver functionality.
Changes from v3:
* Rebased changes on top of '[PATCH 00/12] TI J7x Disable Incomplete DT Nodes'
* Removed "dt-bindings: PCI: Add host mode device-id for j721s2 platform" patch and
send it own series to avoid a dependency that would hold up other patches in this
series
Changes from v4:
* Add my Signed-off-by lines to all patchsets
Aswath Govindraju (7):
arm64: dts: ti: k3-j721s2-main: Add support for USB
arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0
arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support
arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes
arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe
Matt Ranostay (1):
arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node
.../dts/ti/k3-j721s2-common-proc-board.dts | 92 +++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 156 ++++++++++++++++++
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 42 +++++
4 files changed, 330 insertions(+)
--
2.38.GIT
next reply other threads:[~2022-11-03 4:42 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-03 4:41 Matt Ranostay [this message]
2022-11-03 4:41 ` [PATCH v5 0/8] J721S2: Add support for additional IPs Matt Ranostay
2022-11-03 4:41 ` [PATCH v5 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Matt Ranostay
2022-11-03 4:41 ` Matt Ranostay
2022-11-16 8:53 ` Ravi Gunasekaran
2022-11-16 8:53 ` Ravi Gunasekaran
2022-11-03 4:41 ` [PATCH v5 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Matt Ranostay
2022-11-03 4:41 ` Matt Ranostay
2022-11-16 8:58 ` Ravi Gunasekaran
2022-11-16 8:58 ` Ravi Gunasekaran
2022-11-18 9:58 ` Matt Ranostay
2022-11-18 9:58 ` Matt Ranostay
2022-11-03 4:41 ` [PATCH v5 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Matt Ranostay
2022-11-03 4:41 ` Matt Ranostay
2022-11-16 8:33 ` Vaishnav Achath
2022-11-16 8:33 ` Vaishnav Achath
2022-11-18 10:01 ` Matt Ranostay
2022-11-18 10:01 ` Matt Ranostay
2022-11-03 4:41 ` [PATCH v5 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Matt Ranostay
2022-11-03 4:41 ` Matt Ranostay
2022-11-16 8:54 ` Ravi Gunasekaran
2022-11-16 8:54 ` Ravi Gunasekaran
2022-11-03 4:41 ` [PATCH v5 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Matt Ranostay
2022-11-03 4:41 ` Matt Ranostay
2022-11-16 8:55 ` Ravi Gunasekaran
2022-11-16 8:55 ` Ravi Gunasekaran
2022-11-03 4:41 ` [PATCH v5 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Matt Ranostay
2022-11-03 4:41 ` Matt Ranostay
2022-11-16 8:36 ` Vaishnav Achath
2022-11-16 8:36 ` Vaishnav Achath
2022-11-03 4:41 ` [PATCH v5 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Matt Ranostay
2022-11-03 4:41 ` Matt Ranostay
2022-11-16 10:25 ` Siddharth Vadapalli
2022-11-16 10:25 ` Siddharth Vadapalli
2022-11-03 4:41 ` [PATCH v5 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Matt Ranostay
2022-11-03 4:41 ` Matt Ranostay
2022-11-16 10:26 ` Siddharth Vadapalli
2022-11-16 10:26 ` Siddharth Vadapalli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221103044125.172864-1-mranostay@ti.com \
--to=mranostay@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.