All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: han.xu@nxp.com, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>, Peng Fan <peng.fan@nxp.com>,
	Shenwei Wang <shenwei.wang@nxp.com>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
	linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH 2/3] arm64: dts: imx8dxl: add flexspi support
Date: Fri,  4 Nov 2022 15:21:26 -0400	[thread overview]
Message-ID: <20221104192135.1661541-2-Frank.Li@nxp.com> (raw)
In-Reply-To: <20221104192135.1661541-1-Frank.Li@nxp.com>

Add flexspi0 node at common lsio subsystem.
Enable flexspi0 at imx8dxl_evk boards dts.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../boot/dts/freescale/imx8-ss-lsio.dtsi      | 17 ++++++++-
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 36 +++++++++++++++++++
 .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi   |  5 +++
 3 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 6446e6df7a9a..1f3d225e64ec 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -11,7 +11,8 @@ lsio_subsys: bus@5d000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
+	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>,
+		 <0x08000000 0x0 0x08000000 0x10000000>;
 
 	lsio_mem_clk: clock-lsio-mem {
 		compatible = "fixed-clock";
@@ -107,6 +108,20 @@ lsio_gpio7: gpio@5d0f0000 {
 		power-domains = <&pd IMX_SC_R_GPIO_7>;
 	};
 
+	flexspi0: spi@5d120000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,imx8qxp-fspi";
+		reg = <0x5d120000 0x10000>, <0x08000000 0x10000000>;
+		reg-names = "fspi_base", "fspi_mmap";
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>;
+		clock-names = "fspi", "fspi_en";
+		power-domains = <&pd IMX_SC_R_FSPI_0>;
+		status = "disabled";
+	};
+
 	lsio_mu0: mailbox@5d1b0000 {
 		reg = <0x5d1b0000 0x10000>;
 		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 11b1ff90c06d..f8d416f7fd92 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -181,6 +181,23 @@ vddio1: vddio-regulator {
 	};
 };
 
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	nxp,fspi-dll-slvdly = <4>;
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
 &i2c2 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -386,6 +403,25 @@ IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL	0x06000020
 		>;
 	};
 
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8DXL_QSPI0A_DATA0_LSIO_QSPI0A_DATA0     0x06000021
+			IMX8DXL_QSPI0A_DATA1_LSIO_QSPI0A_DATA1     0x06000021
+			IMX8DXL_QSPI0A_DATA2_LSIO_QSPI0A_DATA2     0x06000021
+			IMX8DXL_QSPI0A_DATA3_LSIO_QSPI0A_DATA3     0x06000021
+			IMX8DXL_QSPI0A_DQS_LSIO_QSPI0A_DQS         0x06000021
+			IMX8DXL_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B     0x06000021
+			IMX8DXL_QSPI0A_SCLK_LSIO_QSPI0A_SCLK       0x06000021
+			IMX8DXL_QSPI0B_SCLK_LSIO_QSPI0B_SCLK       0x06000021
+			IMX8DXL_QSPI0B_DATA0_LSIO_QSPI0B_DATA0     0x06000021
+			IMX8DXL_QSPI0B_DATA1_LSIO_QSPI0B_DATA1     0x06000021
+			IMX8DXL_QSPI0B_DATA2_LSIO_QSPI0B_DATA2     0x06000021
+			IMX8DXL_QSPI0B_DATA3_LSIO_QSPI0B_DATA3     0x06000021
+			IMX8DXL_QSPI0B_DQS_LSIO_QSPI0B_DQS         0x06000021
+			IMX8DXL_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B     0x06000021
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD		0x000014a0
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
index 815bd987b09b..85e6131ec406 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
@@ -3,6 +3,11 @@
  * Copyright 2019~2020, 2022 NXP
  */
 
+&flexspi0 {
+	compatible = "nxp,imx8dxl-fspi";
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &lsio_gpio0 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Frank Li <Frank.Li@nxp.com>
To: han.xu@nxp.com, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>, Peng Fan <peng.fan@nxp.com>,
	Shenwei Wang <shenwei.wang@nxp.com>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
	linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH 2/3] arm64: dts: imx8dxl: add flexspi support
Date: Fri,  4 Nov 2022 15:21:26 -0400	[thread overview]
Message-ID: <20221104192135.1661541-2-Frank.Li@nxp.com> (raw)
In-Reply-To: <20221104192135.1661541-1-Frank.Li@nxp.com>

Add flexspi0 node at common lsio subsystem.
Enable flexspi0 at imx8dxl_evk boards dts.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../boot/dts/freescale/imx8-ss-lsio.dtsi      | 17 ++++++++-
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 36 +++++++++++++++++++
 .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi   |  5 +++
 3 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 6446e6df7a9a..1f3d225e64ec 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -11,7 +11,8 @@ lsio_subsys: bus@5d000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
+	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>,
+		 <0x08000000 0x0 0x08000000 0x10000000>;
 
 	lsio_mem_clk: clock-lsio-mem {
 		compatible = "fixed-clock";
@@ -107,6 +108,20 @@ lsio_gpio7: gpio@5d0f0000 {
 		power-domains = <&pd IMX_SC_R_GPIO_7>;
 	};
 
+	flexspi0: spi@5d120000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,imx8qxp-fspi";
+		reg = <0x5d120000 0x10000>, <0x08000000 0x10000000>;
+		reg-names = "fspi_base", "fspi_mmap";
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>;
+		clock-names = "fspi", "fspi_en";
+		power-domains = <&pd IMX_SC_R_FSPI_0>;
+		status = "disabled";
+	};
+
 	lsio_mu0: mailbox@5d1b0000 {
 		reg = <0x5d1b0000 0x10000>;
 		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 11b1ff90c06d..f8d416f7fd92 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -181,6 +181,23 @@ vddio1: vddio-regulator {
 	};
 };
 
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	nxp,fspi-dll-slvdly = <4>;
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
 &i2c2 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -386,6 +403,25 @@ IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL	0x06000020
 		>;
 	};
 
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8DXL_QSPI0A_DATA0_LSIO_QSPI0A_DATA0     0x06000021
+			IMX8DXL_QSPI0A_DATA1_LSIO_QSPI0A_DATA1     0x06000021
+			IMX8DXL_QSPI0A_DATA2_LSIO_QSPI0A_DATA2     0x06000021
+			IMX8DXL_QSPI0A_DATA3_LSIO_QSPI0A_DATA3     0x06000021
+			IMX8DXL_QSPI0A_DQS_LSIO_QSPI0A_DQS         0x06000021
+			IMX8DXL_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B     0x06000021
+			IMX8DXL_QSPI0A_SCLK_LSIO_QSPI0A_SCLK       0x06000021
+			IMX8DXL_QSPI0B_SCLK_LSIO_QSPI0B_SCLK       0x06000021
+			IMX8DXL_QSPI0B_DATA0_LSIO_QSPI0B_DATA0     0x06000021
+			IMX8DXL_QSPI0B_DATA1_LSIO_QSPI0B_DATA1     0x06000021
+			IMX8DXL_QSPI0B_DATA2_LSIO_QSPI0B_DATA2     0x06000021
+			IMX8DXL_QSPI0B_DATA3_LSIO_QSPI0B_DATA3     0x06000021
+			IMX8DXL_QSPI0B_DQS_LSIO_QSPI0B_DQS         0x06000021
+			IMX8DXL_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B     0x06000021
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD		0x000014a0
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
index 815bd987b09b..85e6131ec406 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
@@ -3,6 +3,11 @@
  * Copyright 2019~2020, 2022 NXP
  */
 
+&flexspi0 {
+	compatible = "nxp,imx8dxl-fspi";
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &lsio_gpio0 {
 	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
 	interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-11-04 19:22 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-04 19:21 [PATCH 1/3] arm64: dts: imx8dxl: add adc0 and adc1 support Frank Li
2022-11-04 19:21 ` Frank Li
2022-11-04 19:21 ` Frank Li [this message]
2022-11-04 19:21   ` [PATCH 2/3] arm64: dts: imx8dxl: add flexspi support Frank Li
2022-11-04 19:21 ` [PATCH 3/3] arm64: dts: imx8dxl: add lpspi support Frank Li
2022-11-04 19:21   ` Frank Li
2022-11-04 19:21 ` [PATCH 0/3] add adc0 flexspi lpspi to 8dxl evk board dts Frank Li
2022-11-04 19:25 ` Frank Li
2022-11-04 19:25   ` Frank Li
2022-11-11  6:53 ` [PATCH 1/3] arm64: dts: imx8dxl: add adc0 and adc1 support Shawn Guo
2022-11-11  6:53   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221104192135.1661541-2-Frank.Li@nxp.com \
    --to=frank.li@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=han.xu@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=shenwei.wang@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.