All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: han.xu@nxp.com, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Dong Aisheng <aisheng.dong@nxp.com>, Peng Fan <peng.fan@nxp.com>,
	Shenwei Wang <shenwei.wang@nxp.com>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
	linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH 3/3] arm64: dts: imx8dxl: add lpspi support
Date: Fri,  4 Nov 2022 15:21:27 -0400	[thread overview]
Message-ID: <20221104192135.1661541-3-Frank.Li@nxp.com> (raw)
In-Reply-To: <20221104192135.1661541-1-Frank.Li@nxp.com>

Add lpspi0 lpspi1 lpspi2 lpspi3 node at common dma subsystem.
Enable lpspi0 at imx8dxl_evk boards dts.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 112 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts |  15 +++
 2 files changed, 127 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index bdbb660c2682..a943a1e2797f 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -20,6 +20,70 @@ dma_ipg_clk: clock-dma-ipg {
 		clock-output-names = "dma_ipg_clk";
 	};
 
+	lpspi0: spi@5a000000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a000000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi0_lpcg 0>,
+			 <&spi0_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <20000000>;
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+		status = "disabled";
+	};
+
+	lpspi1: spi@5a010000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a010000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi1_lpcg 0>,
+			 <&spi1_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+		status = "disabled";
+	};
+
+	lpspi2: spi@5a020000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a020000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi2_lpcg 0>,
+			 <&spi2_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+		status = "disabled";
+	};
+
+	lpspi3: spi@5a030000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a030000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi3_lpcg 0>,
+			 <&spi3_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+		status = "disabled";
+	};
+
 	lpuart0: serial@5a060000 {
 		reg = <0x5a060000 0x1000>;
 		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
@@ -60,6 +124,54 @@ lpuart3: serial@5a090000 {
 		status = "disabled";
 	};
 
+	spi0_lpcg: clock-controller@5a400000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi0_lpcg_clk",
+				     "spi0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+	};
+
+	spi1_lpcg: clock-controller@5a410000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi1_lpcg_clk",
+				     "spi1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+	};
+
+	spi2_lpcg: clock-controller@5a420000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi2_lpcg_clk",
+				     "spi2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+	};
+
+	spi3_lpcg: clock-controller@5a430000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a430000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi3_lpcg_clk",
+				     "spi3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+	};
+
 	uart0_lpcg: clock-controller@5a460000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5a460000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index f8d416f7fd92..280a9c9d8bd9 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -359,6 +359,21 @@ &usdhc2 {
 	status = "okay";
 };
 
+&lpspi3 {
+	fsl,spi-num-chipselects = <1>;
+	fsl,spi-only-use-cs1-sel;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	pinctrl-assert-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		reg = <0>;
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <30000000>;
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Frank Li <Frank.Li@nxp.com>
To: han.xu@nxp.com, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Dong Aisheng <aisheng.dong@nxp.com>, Peng Fan <peng.fan@nxp.com>,
	Shenwei Wang <shenwei.wang@nxp.com>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
	linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH 3/3] arm64: dts: imx8dxl: add lpspi support
Date: Fri,  4 Nov 2022 15:21:27 -0400	[thread overview]
Message-ID: <20221104192135.1661541-3-Frank.Li@nxp.com> (raw)
In-Reply-To: <20221104192135.1661541-1-Frank.Li@nxp.com>

Add lpspi0 lpspi1 lpspi2 lpspi3 node at common dma subsystem.
Enable lpspi0 at imx8dxl_evk boards dts.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 112 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts |  15 +++
 2 files changed, 127 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index bdbb660c2682..a943a1e2797f 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -20,6 +20,70 @@ dma_ipg_clk: clock-dma-ipg {
 		clock-output-names = "dma_ipg_clk";
 	};
 
+	lpspi0: spi@5a000000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a000000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi0_lpcg 0>,
+			 <&spi0_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <20000000>;
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+		status = "disabled";
+	};
+
+	lpspi1: spi@5a010000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a010000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi1_lpcg 0>,
+			 <&spi1_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+		status = "disabled";
+	};
+
+	lpspi2: spi@5a020000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a020000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi2_lpcg 0>,
+			 <&spi2_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+		status = "disabled";
+	};
+
+	lpspi3: spi@5a030000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a030000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi3_lpcg 0>,
+			 <&spi3_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+		status = "disabled";
+	};
+
 	lpuart0: serial@5a060000 {
 		reg = <0x5a060000 0x1000>;
 		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
@@ -60,6 +124,54 @@ lpuart3: serial@5a090000 {
 		status = "disabled";
 	};
 
+	spi0_lpcg: clock-controller@5a400000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi0_lpcg_clk",
+				     "spi0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+	};
+
+	spi1_lpcg: clock-controller@5a410000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi1_lpcg_clk",
+				     "spi1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+	};
+
+	spi2_lpcg: clock-controller@5a420000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi2_lpcg_clk",
+				     "spi2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+	};
+
+	spi3_lpcg: clock-controller@5a430000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a430000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi3_lpcg_clk",
+				     "spi3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+	};
+
 	uart0_lpcg: clock-controller@5a460000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5a460000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index f8d416f7fd92..280a9c9d8bd9 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -359,6 +359,21 @@ &usdhc2 {
 	status = "okay";
 };
 
+&lpspi3 {
+	fsl,spi-num-chipselects = <1>;
+	fsl,spi-only-use-cs1-sel;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	pinctrl-assert-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		reg = <0>;
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <30000000>;
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-11-04 19:22 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-04 19:21 [PATCH 1/3] arm64: dts: imx8dxl: add adc0 and adc1 support Frank Li
2022-11-04 19:21 ` Frank Li
2022-11-04 19:21 ` [PATCH 2/3] arm64: dts: imx8dxl: add flexspi support Frank Li
2022-11-04 19:21   ` Frank Li
2022-11-04 19:21 ` Frank Li [this message]
2022-11-04 19:21   ` [PATCH 3/3] arm64: dts: imx8dxl: add lpspi support Frank Li
2022-11-04 19:21 ` [PATCH 0/3] add adc0 flexspi lpspi to 8dxl evk board dts Frank Li
2022-11-04 19:25 ` Frank Li
2022-11-04 19:25   ` Frank Li
2022-11-11  6:53 ` [PATCH 1/3] arm64: dts: imx8dxl: add adc0 and adc1 support Shawn Guo
2022-11-11  6:53   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221104192135.1661541-3-Frank.Li@nxp.com \
    --to=frank.li@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=han.xu@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=shenwei.wang@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.