From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>
Cc: Conor Dooley <conor@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Ben Dooks <ben.dooks@sifive.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
"Thomas Gleixner" <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
Linus Walleij <linus.walleij@linaro.org>,
Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Hal Feng <hal.feng@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 0/7] Basic device tree support for StarFive JH7110 RISC-V SoC
Date: Tue, 20 Dec 2022 09:12:40 +0800 [thread overview]
Message-ID: <20221220011247.35560-1-hal.feng@starfivetech.com> (raw)
This patch series adds basic device tree support for StarFive JH7110 SoC.
This patch series depends on series [1] and [2]. You can simply get or
review the patches at the link [3].
[1]: https://lore.kernel.org/all/20221220005054.34518-1-hal.feng@starfivetech.com/
[2]: https://lore.kernel.org/all/20221220005529.34744-1-hal.feng@starfivetech.com/
[3]: https://github.com/hal-feng/linux/commits/visionfive2-minimal
Changes since v2:
- Rebased on tag v6.1.
- Dropped patch 8 because it was merged.
Patch 1:
- Made the links into "Link:" tags. (by Conor)
- Corrected the board name to "VisionFive 2" instead of
"VisionFive V2" and added compatibles for version A and
version B of VisionFive 2. (by Emil)
Patch 4:
- Used "sifive,ccache0" compatible string to match. (by Conor)
Patch 5:
- Dropped "select SIFIVE_CCACHE" in config SOC_STARFIVE. (by Conor)
- Dropped "starfive,jh7110-ccache" compatible in
drivers/soc/sifive/sifive_ccache.c.
Patch 6:
- Removed all "clock-frequency = <0>". (by Conor)
- Sorted the nodes after their addresses. (by Emil)
- Renamed "clk_rtc" to "rtc_osc".
- Added "sifive,ccache0" compatible in the cache-controller node.
- Renamed "JH7110_SYSCLK_APB_BUS_FUNC" to "JH7110_SYSCLK_APB_BUS" and
renamed "apb_bus_func" to "apb_bus".
Renamed "JH7110_SYSCLK_IOMUX" to "JH7110_SYSCLK_IOMUX_APB".
Renamed "JH7110_SYSRST_IOMUX" to "JH7110_SYSRST_IOMUX_APB".
Renamed "JH7110_AONRST_AON_IOMUX" to "JH7110_AONRST_IOMUX".
- Removed "reg-names" in gpio nodes.
Patch 7:
- Corrected the board name to "VisionFive 2" instead of "VisionFive V2".
- Renamed jh7110-starfive-visionfive-v2.dts to
jh7110-starfive-visionfive-2.dtsi.
- Added dts for VisionFive 2 version A and version B boards.
- In the chosen node, deleted "linux,initrd-start" and "linux,initrd-end"
and changed the value of "stdout-path" to "serial0:115200n8".
- Changed the bias of uart0 "rx-pins" to
"bias-disable; /* external pull-up */".
- Renamed "clk_rtc" to "rtc_osc".
- Moved the gpio node behind the uart0 node.
v2: https://lore.kernel.org/all/20221118011714.70877-1-hal.feng@starfivetech.com/
Changes since v1:
- Rebased on tag v6.1-rc5.
- Added blank line in patch 1. (by Krzysztof)
- Rebased patch 4 and 6 on the newest code. (by Conor)
- Dropped patch 5. (by Conor)
- Removed the quirk of JH7100 in patch 6, considering this patch series
should only add support for JH7110.
- For patch 27, added Co-developed-by tag for Jianlong and me. Renamed
cpu labels to "S76_0", "U74_*" instead of "cpu*" following the style
of jh7100.dtsi. Moved all "clock-frequency" properties to the board dts.
Rewrote clock-controller nodes and deleted reset-controller nodes for
using auxiliary bus. Rewrote gpio nodes following generic pinctrl
bindings. Removed the redundant second reset entry of uart nodes.
- For patch 28, added Co-developed-by tag for Jianlong and me. Added a
chosen node. Removed reserved-memory node. Added fixed frequency clock
nodes for overriding the "clock-frequency" properties. Rewrote the gpio
nodes following generic pinctrl bindings.
- Dropped patch 30. (by Conor)
- Reworded the commit messages.
v1: https://lore.kernel.org/all/20220929143225.17907-1-hal.feng@linux.starfivetech.com/
Emil Renner Berthing (7):
dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive 2 board
dt-bindings: timer: Add StarFive JH7110 clint
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC
soc: sifive: ccache: Add StarFive JH7110 support
riscv: dts: starfive: Add initial StarFive JH7110 device tree
riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device
tree
.../sifive,plic-1.0.0.yaml | 1 +
.../bindings/riscv/sifive,ccache0.yaml | 9 +-
.../devicetree/bindings/riscv/starfive.yaml | 6 +
.../bindings/timer/sifive,clint.yaml | 1 +
arch/riscv/boot/dts/starfive/Makefile | 1 +
.../jh7110-starfive-visionfive-2-va.dts | 13 +
.../jh7110-starfive-visionfive-2-vb.dts | 13 +
.../jh7110-starfive-visionfive-2.dtsi | 111 +++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 411 ++++++++++++++++++
drivers/soc/Makefile | 2 +-
drivers/soc/sifive/Kconfig | 2 +-
11 files changed, 567 insertions(+), 3 deletions(-)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-va.dts
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-vb.dts
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
base-commit: 830b3c68c1fb1e9176028d02ef86f3cf76aa2476
prerequisite-patch-id: 4dc515731ce237184553c1606ffb3afaeb51c3d8
prerequisite-patch-id: 09c98554df52d17ba5fd604125f8cdd62cbe80d1
prerequisite-patch-id: a798370d170dc2bcc79ed86f741c21c1e6d87c78
prerequisite-patch-id: bd9fd8b5cb2376dc7a5e08e1a1fbb969cf475926
prerequisite-patch-id: c57ebb83bc43ccd2a8366ff166eb499da1e1d2cf
prerequisite-patch-id: a1673a9e9f19d6fab5a51abb721e54e36636f067
prerequisite-patch-id: 94860423c7acc9025249d4bb36652a585bd0a797
prerequisite-patch-id: b5084253283929d9a6d0e66c350400c7c85d034d
prerequisite-patch-id: 6e369dbe9dca2785e4ea7d0b80e525e227a90a6e
prerequisite-patch-id: e08806183c152714c563f3a21c6d7b2f539c4d6e
prerequisite-patch-id: 79db8036abdc48fd36da227652ec62627a6b548b
prerequisite-patch-id: 06971b8e6bddc0e87e63bfdb0ce8bfb653bd73aa
prerequisite-patch-id: 16309a0e23811a2c55d2e56886de3e8eccc51554
prerequisite-patch-id: bf4f7ab0b6cfa90b6e49e66c7d75ed2eaaebbe78
prerequisite-patch-id: 38468d532e87867990055d3320679f18c5f52278
prerequisite-patch-id: 4710f2ac22dca0bdd9ff5d744d2c37cab3c74515
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>
Cc: Conor Dooley <conor@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Ben Dooks <ben.dooks@sifive.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
"Thomas Gleixner" <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
Linus Walleij <linus.walleij@linaro.org>,
Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Hal Feng <hal.feng@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 0/7] Basic device tree support for StarFive JH7110 RISC-V SoC
Date: Tue, 20 Dec 2022 09:12:40 +0800 [thread overview]
Message-ID: <20221220011247.35560-1-hal.feng@starfivetech.com> (raw)
This patch series adds basic device tree support for StarFive JH7110 SoC.
This patch series depends on series [1] and [2]. You can simply get or
review the patches at the link [3].
[1]: https://lore.kernel.org/all/20221220005054.34518-1-hal.feng@starfivetech.com/
[2]: https://lore.kernel.org/all/20221220005529.34744-1-hal.feng@starfivetech.com/
[3]: https://github.com/hal-feng/linux/commits/visionfive2-minimal
Changes since v2:
- Rebased on tag v6.1.
- Dropped patch 8 because it was merged.
Patch 1:
- Made the links into "Link:" tags. (by Conor)
- Corrected the board name to "VisionFive 2" instead of
"VisionFive V2" and added compatibles for version A and
version B of VisionFive 2. (by Emil)
Patch 4:
- Used "sifive,ccache0" compatible string to match. (by Conor)
Patch 5:
- Dropped "select SIFIVE_CCACHE" in config SOC_STARFIVE. (by Conor)
- Dropped "starfive,jh7110-ccache" compatible in
drivers/soc/sifive/sifive_ccache.c.
Patch 6:
- Removed all "clock-frequency = <0>". (by Conor)
- Sorted the nodes after their addresses. (by Emil)
- Renamed "clk_rtc" to "rtc_osc".
- Added "sifive,ccache0" compatible in the cache-controller node.
- Renamed "JH7110_SYSCLK_APB_BUS_FUNC" to "JH7110_SYSCLK_APB_BUS" and
renamed "apb_bus_func" to "apb_bus".
Renamed "JH7110_SYSCLK_IOMUX" to "JH7110_SYSCLK_IOMUX_APB".
Renamed "JH7110_SYSRST_IOMUX" to "JH7110_SYSRST_IOMUX_APB".
Renamed "JH7110_AONRST_AON_IOMUX" to "JH7110_AONRST_IOMUX".
- Removed "reg-names" in gpio nodes.
Patch 7:
- Corrected the board name to "VisionFive 2" instead of "VisionFive V2".
- Renamed jh7110-starfive-visionfive-v2.dts to
jh7110-starfive-visionfive-2.dtsi.
- Added dts for VisionFive 2 version A and version B boards.
- In the chosen node, deleted "linux,initrd-start" and "linux,initrd-end"
and changed the value of "stdout-path" to "serial0:115200n8".
- Changed the bias of uart0 "rx-pins" to
"bias-disable; /* external pull-up */".
- Renamed "clk_rtc" to "rtc_osc".
- Moved the gpio node behind the uart0 node.
v2: https://lore.kernel.org/all/20221118011714.70877-1-hal.feng@starfivetech.com/
Changes since v1:
- Rebased on tag v6.1-rc5.
- Added blank line in patch 1. (by Krzysztof)
- Rebased patch 4 and 6 on the newest code. (by Conor)
- Dropped patch 5. (by Conor)
- Removed the quirk of JH7100 in patch 6, considering this patch series
should only add support for JH7110.
- For patch 27, added Co-developed-by tag for Jianlong and me. Renamed
cpu labels to "S76_0", "U74_*" instead of "cpu*" following the style
of jh7100.dtsi. Moved all "clock-frequency" properties to the board dts.
Rewrote clock-controller nodes and deleted reset-controller nodes for
using auxiliary bus. Rewrote gpio nodes following generic pinctrl
bindings. Removed the redundant second reset entry of uart nodes.
- For patch 28, added Co-developed-by tag for Jianlong and me. Added a
chosen node. Removed reserved-memory node. Added fixed frequency clock
nodes for overriding the "clock-frequency" properties. Rewrote the gpio
nodes following generic pinctrl bindings.
- Dropped patch 30. (by Conor)
- Reworded the commit messages.
v1: https://lore.kernel.org/all/20220929143225.17907-1-hal.feng@linux.starfivetech.com/
Emil Renner Berthing (7):
dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive 2 board
dt-bindings: timer: Add StarFive JH7110 clint
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC
soc: sifive: ccache: Add StarFive JH7110 support
riscv: dts: starfive: Add initial StarFive JH7110 device tree
riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device
tree
.../sifive,plic-1.0.0.yaml | 1 +
.../bindings/riscv/sifive,ccache0.yaml | 9 +-
.../devicetree/bindings/riscv/starfive.yaml | 6 +
.../bindings/timer/sifive,clint.yaml | 1 +
arch/riscv/boot/dts/starfive/Makefile | 1 +
.../jh7110-starfive-visionfive-2-va.dts | 13 +
.../jh7110-starfive-visionfive-2-vb.dts | 13 +
.../jh7110-starfive-visionfive-2.dtsi | 111 +++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 411 ++++++++++++++++++
drivers/soc/Makefile | 2 +-
drivers/soc/sifive/Kconfig | 2 +-
11 files changed, 567 insertions(+), 3 deletions(-)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-va.dts
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-vb.dts
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
base-commit: 830b3c68c1fb1e9176028d02ef86f3cf76aa2476
prerequisite-patch-id: 4dc515731ce237184553c1606ffb3afaeb51c3d8
prerequisite-patch-id: 09c98554df52d17ba5fd604125f8cdd62cbe80d1
prerequisite-patch-id: a798370d170dc2bcc79ed86f741c21c1e6d87c78
prerequisite-patch-id: bd9fd8b5cb2376dc7a5e08e1a1fbb969cf475926
prerequisite-patch-id: c57ebb83bc43ccd2a8366ff166eb499da1e1d2cf
prerequisite-patch-id: a1673a9e9f19d6fab5a51abb721e54e36636f067
prerequisite-patch-id: 94860423c7acc9025249d4bb36652a585bd0a797
prerequisite-patch-id: b5084253283929d9a6d0e66c350400c7c85d034d
prerequisite-patch-id: 6e369dbe9dca2785e4ea7d0b80e525e227a90a6e
prerequisite-patch-id: e08806183c152714c563f3a21c6d7b2f539c4d6e
prerequisite-patch-id: 79db8036abdc48fd36da227652ec62627a6b548b
prerequisite-patch-id: 06971b8e6bddc0e87e63bfdb0ce8bfb653bd73aa
prerequisite-patch-id: 16309a0e23811a2c55d2e56886de3e8eccc51554
prerequisite-patch-id: bf4f7ab0b6cfa90b6e49e66c7d75ed2eaaebbe78
prerequisite-patch-id: 38468d532e87867990055d3320679f18c5f52278
prerequisite-patch-id: 4710f2ac22dca0bdd9ff5d744d2c37cab3c74515
--
2.38.1
next reply other threads:[~2022-12-20 1:13 UTC|newest]
Thread overview: 112+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-20 1:12 Hal Feng [this message]
2022-12-20 1:12 ` [PATCH v3 0/7] Basic device tree support for StarFive JH7110 RISC-V SoC Hal Feng
2022-12-20 1:12 ` [PATCH v3 1/7] dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive 2 board Hal Feng
2022-12-20 1:12 ` Hal Feng
2022-12-20 10:05 ` Krzysztof Kozlowski
2022-12-20 10:05 ` Krzysztof Kozlowski
2022-12-23 2:05 ` Hal Feng
2022-12-23 2:05 ` Hal Feng
2022-12-20 20:58 ` Conor Dooley
2022-12-20 20:58 ` Conor Dooley
2022-12-23 2:15 ` Hal Feng
2022-12-23 2:15 ` Hal Feng
2022-12-20 1:12 ` [PATCH v3 2/7] dt-bindings: timer: Add StarFive JH7110 clint Hal Feng
2022-12-20 1:12 ` Hal Feng
2022-12-20 1:12 ` [PATCH v3 3/7] dt-bindings: interrupt-controller: Add StarFive JH7110 plic Hal Feng
2022-12-20 1:12 ` Hal Feng
2022-12-20 1:12 ` [PATCH v3 4/7] dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC Hal Feng
2022-12-20 1:12 ` Hal Feng
2022-12-20 20:21 ` Rob Herring
2022-12-20 20:21 ` Rob Herring
2022-12-20 1:12 ` [PATCH v3 5/7] soc: sifive: ccache: Add StarFive JH7110 support Hal Feng
2022-12-20 1:12 ` Hal Feng
2022-12-20 21:14 ` Conor Dooley
2022-12-20 21:14 ` Conor Dooley
2022-12-20 1:12 ` [PATCH v3 6/7] riscv: dts: starfive: Add initial StarFive JH7110 device tree Hal Feng
2022-12-20 1:12 ` Hal Feng
2022-12-20 10:10 ` Krzysztof Kozlowski
2022-12-20 10:10 ` Krzysztof Kozlowski
2022-12-25 10:31 ` Hal Feng
2022-12-25 10:31 ` Hal Feng
2022-12-25 11:56 ` Krzysztof Kozlowski
2022-12-25 11:56 ` Krzysztof Kozlowski
2022-12-20 21:31 ` Conor Dooley
2022-12-20 21:31 ` Conor Dooley
2022-12-25 14:31 ` Hal Feng
2022-12-25 14:31 ` Hal Feng
2022-12-27 20:58 ` Conor Dooley
2022-12-27 20:58 ` Conor Dooley
2022-12-28 22:48 ` Conor Dooley
2022-12-28 22:48 ` Conor Dooley
2022-12-29 5:25 ` Icenowy Zheng
2022-12-29 5:25 ` Icenowy Zheng
2022-12-29 9:02 ` Conor Dooley
2022-12-29 9:02 ` Conor Dooley
2023-02-01 7:53 ` Hal Feng
2023-02-01 7:53 ` Hal Feng
2023-02-01 7:31 ` Hal Feng
2023-02-01 7:31 ` Hal Feng
2023-02-01 7:21 ` Hal Feng
2023-02-01 7:21 ` Hal Feng
2023-02-01 8:21 ` Conor Dooley
2023-02-01 8:21 ` Conor Dooley
2023-02-02 18:56 ` Hal Feng
2023-02-02 18:56 ` Hal Feng
2023-02-02 19:41 ` Conor Dooley
2023-02-02 19:41 ` Conor Dooley
2023-02-09 11:11 ` Conor Dooley
2023-02-09 11:11 ` Conor Dooley
2023-02-13 9:41 ` Hal Feng
2023-02-13 9:41 ` Hal Feng
2023-02-13 10:07 ` Conor Dooley
2023-02-13 10:07 ` Conor Dooley
2023-02-14 2:37 ` Hal Feng
2023-02-14 2:37 ` Hal Feng
2023-02-15 3:07 ` Hal Feng
2023-02-15 3:07 ` Hal Feng
2023-02-15 7:42 ` Conor Dooley
2023-02-15 7:42 ` Conor Dooley
2023-02-15 7:59 ` Conor Dooley
2023-02-15 7:59 ` Conor Dooley
2023-01-31 2:00 ` Hal Feng
2023-01-31 2:00 ` Hal Feng
2023-01-31 6:17 ` Conor Dooley
2023-01-31 6:17 ` Conor Dooley
2023-02-02 2:42 ` Hal Feng
2023-02-02 2:42 ` Hal Feng
2023-02-02 6:19 ` Conor Dooley
2023-02-02 6:19 ` Conor Dooley
2022-12-20 1:12 ` [PATCH v3 7/7] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board " Hal Feng
2022-12-20 1:12 ` Hal Feng
2022-12-20 21:26 ` Conor Dooley
2022-12-20 21:26 ` Conor Dooley
2022-12-23 3:12 ` Hal Feng
2022-12-23 3:12 ` Hal Feng
2022-12-28 22:49 ` Conor Dooley
2022-12-28 22:49 ` Conor Dooley
2023-01-10 17:59 ` Conor Dooley
2023-01-10 17:59 ` Conor Dooley
2023-01-18 23:43 ` Conor Dooley
2023-01-18 23:43 ` Conor Dooley
2023-02-14 9:53 ` Emil Renner Berthing
2023-02-14 9:53 ` Emil Renner Berthing
2023-02-15 14:03 ` Hal Feng
2023-02-15 14:03 ` Hal Feng
2023-02-16 9:27 ` Emil Renner Berthing
2023-02-16 9:27 ` Emil Renner Berthing
2023-02-16 9:50 ` Conor Dooley
2023-02-16 9:50 ` Conor Dooley
2023-02-16 10:09 ` Conor Dooley
2023-02-16 10:09 ` Conor Dooley
2023-02-16 10:32 ` Emil Renner Berthing
2023-02-16 10:32 ` Emil Renner Berthing
2023-02-16 12:27 ` Hal Feng
2023-02-16 12:27 ` Hal Feng
2023-02-16 13:02 ` Conor Dooley
2023-02-16 13:02 ` Conor Dooley
2022-12-26 23:01 ` [PATCH v3 0/7] Basic device tree support for StarFive JH7110 RISC-V SoC Conor Dooley
2022-12-26 23:01 ` Conor Dooley
2022-12-27 7:58 ` Krzysztof Kozlowski
2022-12-27 7:58 ` Krzysztof Kozlowski
2022-12-27 14:20 ` Conor Dooley
2022-12-27 14:20 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221220011247.35560-1-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=ben.dooks@sifive.com \
--cc=conor@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=maz@kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.