All of lore.kernel.org
 help / color / mirror / Atom feed
From: Igor Mammedov <imammedo@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>, Ani Sinha <ani@anisinha.ca>
Subject: [PATCH 29/40] pcihp: make bridge describe itself using AcpiDevAmlIfClass:build_dev_aml
Date: Thu, 12 Jan 2023 15:03:01 +0100	[thread overview]
Message-ID: <20230112140312.3096331-30-imammedo@redhat.com> (raw)
In-Reply-To: <20230112140312.3096331-1-imammedo@redhat.com>

simplify build_append_pci_bus_devices() a bit by handling bridge
specific logic in bridge dedicated AcpiDevAmlIfClass::build_dev_aml
callback.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
 include/hw/acpi/pci.h     |  4 ++++
 hw/acpi/Kconfig           |  4 ++++
 hw/acpi/meson.build       |  4 +++-
 hw/acpi/pci-bridge-stub.c | 20 ++++++++++++++++++++
 hw/acpi/pci-bridge.c      | 27 +++++++++++++++++++++++++++
 hw/i386/Kconfig           |  1 +
 hw/i386/acpi-build.c      | 17 ++---------------
 hw/pci/pci_bridge.c       |  9 +++++++++
 8 files changed, 70 insertions(+), 16 deletions(-)
 create mode 100644 hw/acpi/pci-bridge-stub.c
 create mode 100644 hw/acpi/pci-bridge.c

diff --git a/include/hw/acpi/pci.h b/include/hw/acpi/pci.h
index b5deee0a9d..467a99461c 100644
--- a/include/hw/acpi/pci.h
+++ b/include/hw/acpi/pci.h
@@ -27,6 +27,7 @@
 #define HW_ACPI_PCI_H
 
 #include "hw/acpi/bios-linker-loader.h"
+#include "hw/acpi/acpi_aml_interface.h"
 
 typedef struct AcpiMcfgInfo {
     uint64_t base;
@@ -36,4 +37,7 @@ typedef struct AcpiMcfgInfo {
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info,
                 const char *oem_id, const char *oem_table_id);
 Aml *aml_pci_device_dsm(void);
+
+void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus);
+void build_pci_bridge_aml(AcpiDevAmlIf *adev, Aml *scope);
 #endif
diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
index 1f7803fdab..e07d3204eb 100644
--- a/hw/acpi/Kconfig
+++ b/hw/acpi/Kconfig
@@ -39,6 +39,10 @@ config ACPI_PCIHP
     bool
     depends on ACPI
 
+config ACPI_PCI_BRIDGE
+    bool
+    depends on ACPI && PCI && ACPI_PCIHP
+
 config ACPI_HMAT
     bool
     depends on ACPI
diff --git a/hw/acpi/meson.build b/hw/acpi/meson.build
index 30054a8cdc..50b73129b4 100644
--- a/hw/acpi/meson.build
+++ b/hw/acpi/meson.build
@@ -19,6 +19,7 @@ acpi_ss.add(when: 'CONFIG_ACPI_HW_REDUCED', if_true: files('generic_event_device
 acpi_ss.add(when: 'CONFIG_ACPI_HMAT', if_true: files('hmat.c'))
 acpi_ss.add(when: 'CONFIG_ACPI_APEI', if_true: files('ghes.c'), if_false: files('ghes-stub.c'))
 acpi_ss.add(when: 'CONFIG_ACPI_PIIX4', if_true: files('piix4.c'))
+acpi_ss.add(when: 'CONFIG_ACPI_PCI_BRIDGE', if_true: files('pci-bridge.c'))
 acpi_ss.add(when: 'CONFIG_ACPI_PCIHP', if_true: files('pcihp.c'))
 acpi_ss.add(when: 'CONFIG_ACPI_PCIHP', if_false: files('acpi-pci-hotplug-stub.c'))
 acpi_ss.add(when: 'CONFIG_ACPI_VIOT', if_true: files('viot.c'))
@@ -30,9 +31,10 @@ if have_tpm
   acpi_ss.add(files('tpm.c'))
 endif
 softmmu_ss.add(when: 'CONFIG_ACPI', if_false: files('acpi-stub.c', 'aml-build-stub.c', 'ghes-stub.c', 'acpi_interface.c'))
+softmmu_ss.add(when: 'CONFIG_ACPI_PCI_BRIDGE', if_false: files('pci-bridge-stub.c'))
 softmmu_ss.add_all(when: 'CONFIG_ACPI', if_true: acpi_ss)
 softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('acpi-stub.c', 'aml-build-stub.c',
                                                   'acpi-x86-stub.c', 'ipmi-stub.c', 'ghes-stub.c',
                                                   'acpi-mem-hotplug-stub.c', 'acpi-cpu-hotplug-stub.c',
                                                   'acpi-pci-hotplug-stub.c', 'acpi-nvdimm-stub.c',
-                                                  'cxl-stub.c'))
+                                                  'cxl-stub.c', 'pci-bridge-stub.c'))
diff --git a/hw/acpi/pci-bridge-stub.c b/hw/acpi/pci-bridge-stub.c
new file mode 100644
index 0000000000..9d78638c48
--- /dev/null
+++ b/hw/acpi/pci-bridge-stub.c
@@ -0,0 +1,20 @@
+/*
+ * QEMU ACPI PCI bridge stub
+ *
+ * Copyright (c) 2023 Red Hat, Inc.
+ *
+ * Author:
+ *   Igor Mammedov <imammedo@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/acpi/pci.h"
+
+void build_pci_bridge_aml(AcpiDevAmlIf *adev, Aml *scope)
+{
+}
diff --git a/hw/acpi/pci-bridge.c b/hw/acpi/pci-bridge.c
new file mode 100644
index 0000000000..5f3ee5157f
--- /dev/null
+++ b/hw/acpi/pci-bridge.c
@@ -0,0 +1,27 @@
+/*
+ * QEMU ACPI PCI bridge
+ *
+ * Copyright (c) 2023 Red Hat, Inc.
+ *
+ * Author:
+ *   Igor Mammedov <imammedo@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/acpi/pci.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/acpi/pcihp.h"
+
+void build_pci_bridge_aml(AcpiDevAmlIf *adev, Aml *scope)
+{
+    PCIBridge *br = PCI_BRIDGE(adev);
+
+    if (object_property_find(OBJECT(&br->sec_bus), ACPI_PCIHP_PROP_BSEL)) {
+        build_append_pci_bus_devices(scope, pci_bridge_get_sec_bus(br));
+    }
+}
diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig
index c4fb5b49bd..1bf47b0b0b 100644
--- a/hw/i386/Kconfig
+++ b/hw/i386/Kconfig
@@ -58,6 +58,7 @@ config PC_ACPI
     select ACPI_X86
     select ACPI_CPU_HOTPLUG
     select ACPI_MEMORY_HOTPLUG
+    select ACPI_PCI_BRIDGE
     select ACPI_VIOT
     select SMBUS_EEPROM
     select PFLASH_CFI01
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 466f90c9e6..5b4f453395 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -385,8 +385,7 @@ static void build_append_pcihp_notify_entry(Aml *method, int slot)
     aml_append(method, if_ctx);
 }
 
-static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,
-                                         bool pcihp_bridge_en)
+void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus)
 {
     Aml *dev, *notify_method = NULL, *method;
     QObject *bsel;
@@ -408,7 +407,6 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,
         /* ACPI spec: 1.0b: Table 6-2 _ADR Object Bus Types, PCI type */
         int adr = slot << 16 | func;
         bool hotpluggbale_slot = false;
-        bool bridge_in_acpi = false;
         bool cold_plugged_bridge = false;
 
         if (pdev) {
@@ -420,7 +418,6 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,
              */
             cold_plugged_bridge = IS_PCI_BRIDGE(pdev) &&
                                   !DEVICE(pdev)->hotplugged;
-            bridge_in_acpi =  cold_plugged_bridge && pcihp_bridge_en;
 
             hotpluggbale_slot = bsel && dc->hotpluggable &&
                                 !cold_plugged_bridge;
@@ -473,16 +470,6 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,
 
         call_dev_aml_func(DEVICE(pdev), dev);
 
-        if (bridge_in_acpi) {
-            /*
-             * device is coldplugged bridge,
-             * add child device descriptions into its scope
-             */
-            PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(pdev));
-
-            build_append_pci_bus_devices(dev, sec_bus, pcihp_bridge_en);
-        }
-
         if (hotpluggbale_slot) {
             aml_append(dev, aml_name_decl("_SUN", aml_int(slot)));
             /* add _EJ0 to make slot hotpluggable  */
@@ -1706,7 +1693,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
             PCIBus *bus = PCI_HOST_BRIDGE(pci_host)->bus;
             Aml *scope = aml_scope("PCI0");
             /* Scan all PCI buses. Generate tables to support hotplug. */
-            build_append_pci_bus_devices(scope, bus, pm->pcihp_bridge_en);
+            build_append_pci_bus_devices(scope, bus);
             aml_append(sb_scope, scope);
         }
     }
diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
index a1a1cc861e..dd5af508f9 100644
--- a/hw/pci/pci_bridge.c
+++ b/hw/pci/pci_bridge.c
@@ -37,6 +37,7 @@
 #include "qemu/range.h"
 #include "qapi/error.h"
 #include "hw/acpi/acpi_aml_interface.h"
+#include "hw/acpi/pci.h"
 
 /* PCI bridge subsystem vendor ID helper functions */
 #define PCI_SSVID_SIZEOF        8
@@ -468,10 +469,18 @@ int pci_bridge_qemu_reserve_cap_init(PCIDevice *dev, int cap_offset,
     return 0;
 }
 
+static void pci_bridge_class_init(ObjectClass *klass, void *data)
+{
+    AcpiDevAmlIfClass *adevc = ACPI_DEV_AML_IF_CLASS(klass);
+
+    adevc->build_dev_aml = build_pci_bridge_aml;
+}
+
 static const TypeInfo pci_bridge_type_info = {
     .name = TYPE_PCI_BRIDGE,
     .parent = TYPE_PCI_DEVICE,
     .instance_size = sizeof(PCIBridge),
+    .class_init = pci_bridge_class_init,
     .abstract = true,
     .interfaces = (InterfaceInfo[]) {
         { TYPE_ACPI_DEV_AML_IF },
-- 
2.31.1



  parent reply	other threads:[~2023-01-12 14:29 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-12 14:02 [PATCH 00/40] x86: fixing and cleaning up ACPI PCI code part 3 Igor Mammedov
2023-01-12 14:02 ` [PATCH 01/40] tests: qtest: print device_add error before failing test Igor Mammedov
2023-01-12 14:02 ` [PATCH 02/40] tests: acpi: cleanup arguments to make them more readable Igor Mammedov
2023-01-12 14:02 ` [PATCH 03/40] tests: acpi: whitelist DSDT blobs for tests that use pci-bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 04/40] tests: acpi: extend pcihp with nested bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 05/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:02 ` [PATCH 06/40] tests: acpi: cleanup use_uefi argument usage Igor Mammedov
2023-01-12 14:02 ` [PATCH 07/40] pci_bridge: remove whitespace Igor Mammedov
2023-01-12 14:02 ` [PATCH 08/40] x86: acpi: pcihp: clean up duplicate bridge_in_acpi assignment Igor Mammedov
2023-01-12 14:02 ` [PATCH 09/40] pci: acpi hotplug: rename x-native-hotplug to x-do-not-expose-native-hotplug-cap Igor Mammedov
2023-01-12 14:02 ` [PATCH 10/40] pcihp: piix4: do not call acpi_pcihp_reset() when ACPI PCI hotplug is disabled Igor Mammedov
2023-01-12 14:02 ` [PATCH 11/40] pci: acpihp: assign BSEL only to coldplugged bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 12/40] x86: pcihp: fix invalid AML PCNT calls to hotplugged bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 13/40] tests: boot_sector_test: avoid crashing if status is not available yet Igor Mammedov
2023-01-12 14:02 ` [PATCH 14/40] tests: acpi: extend bridge tests with hotplugged bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 15/40] tests: boot_sector_test(): make it multi-shot Igor Mammedov
2023-01-12 14:02 ` [PATCH 16/40] tests: acpi: add reboot cycle to bridge test Igor Mammedov
2023-01-12 14:02 ` [PATCH 17/40] tests: acpi: whitelist DSDT before refactoring acpi based PCI hotplug machinery Igor Mammedov
2023-01-12 14:02 ` [PATCH 18/40] pcihp: drop pcihp_bridge_en dependency when composing PCNT method Igor Mammedov
2023-01-12 14:02 ` [PATCH 19/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:02 ` [PATCH 20/40] tests: acpi: whitelist DSDT before refactoring acpi based PCI hotplug machinery Igor Mammedov
2023-01-12 14:02 ` [PATCH 21/40] pcihp: compose PCNT callchain right before its user _GPE._E01 Igor Mammedov
2023-01-12 14:02 ` [PATCH 22/40] pcihp: do not put empty PCNT in DSDT Igor Mammedov
2023-01-12 14:02 ` [PATCH 23/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:02 ` [PATCH 24/40] whitelist DSDT before adding endpoint devices to bridge testcases Igor Mammedov
2023-01-12 14:02 ` [PATCH 25/40] tests: acpi: add endpoint devices to bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 26/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:02 ` [PATCH 27/40] x86: pcihp: acpi: prepare slot ignore rule to work with self describing bridges Igor Mammedov
2023-01-12 14:03 ` [PATCH 28/40] pci: acpi: wire up AcpiDevAmlIf interface to generic bridge Igor Mammedov
2023-01-12 14:03 ` Igor Mammedov [this message]
2023-01-12 14:03 ` [PATCH 30/40] pci: make sure pci_bus_is_express() won't error out with "discards ‘const’ qualifier" Igor Mammedov
2023-01-12 14:03 ` [PATCH 31/40] pcihp: isolate rule whether slot should be described in DSDT Igor Mammedov
2023-01-12 14:03 ` [PATCH 32/40] tests: acpi: whitelist DSDT before decoupling PCI hotplug code from basic slots description Igor Mammedov
2023-01-12 14:03 ` [PATCH 33/40] pcihp: acpi: decouple hotplug and generic " Igor Mammedov
2023-01-12 14:03 ` [PATCH 34/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:03 ` [PATCH 35/40] tests: acpi: whitelist DSDT blobs before removing dynamic _DSM on coldplugged bridges Igor Mammedov
2023-01-12 14:03 ` [PATCH 36/40] pcihp: acpi: ignore coldplugged bridges when composing hotpluggable slots Igor Mammedov
2023-01-12 14:03 ` [PATCH 37/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:03 ` [PATCH 38/40] tests: acpi: whitelist DSDT before moving non-hotpluggble slots description from hotplug path Igor Mammedov
2023-01-12 14:03 ` [PATCH 39/40] pcihp: generate populated non-hotpluggble slot descriptions on non-hotplug path Igor Mammedov
2023-01-12 14:03 ` [PATCH 40/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-25 17:02 ` [PATCH 00/40] x86: fixing and cleaning up ACPI PCI code part 3 Igor Mammedov
2023-01-25 17:34   ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230112140312.3096331-30-imammedo@redhat.com \
    --to=imammedo@redhat.com \
    --cc=ani@anisinha.ca \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.