From: Igor Mammedov <imammedo@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>, Ani Sinha <ani@anisinha.ca>
Subject: [PATCH 39/40] pcihp: generate populated non-hotpluggble slot descriptions on non-hotplug path
Date: Thu, 12 Jan 2023 15:03:11 +0100 [thread overview]
Message-ID: <20230112140312.3096331-40-imammedo@redhat.com> (raw)
In-Reply-To: <20230112140312.3096331-1-imammedo@redhat.com>
Generating slots descriptions populated by non-hotpluggable devices
is akward at best and complicates hotplug path (build_append_pcihp_slots)
needlessly, and builds only dynamic _DSM for such slots which is overlkill.
Clean it up and let non-hotplug path (build_append_pci_bus_devices)
to handle that task.
Such clean up effectively drops dynamic _DSM methods on non-hotpluggable
slots (even though bus itself is hotpluggable), but in practice it
affects only built-in devices (ide controllers/various bridges) that don't
use acpi-index anyways so effectively it doesn't matter (NICs are hotpluggble).
Follow up series will add static _DSM for non-hotpluggble devices/buses
that will not depend on ACPI PCI hotplug at all, and potentially would
allows us to reuse non-hotplug path elsewhere (PBX/microvm/arm-virt),
including new support for acpi-index for non-hotpluggable devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
hw/i386/acpi-build.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 50504578b9..c085bf7812 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -414,6 +414,7 @@ static bool is_devfn_ignored_hotplug(const int devfn, const PCIBus *bus)
PCIDevice *pdev = bus->devices[devfn];
if (pdev) {
return is_devfn_ignored_generic(devfn, bus) ||
+ !DEVICE_GET_CLASS(pdev)->hotpluggable ||
/* Cold plugged bridges aren't themselves hot-pluggable */
(IS_PCI_BRIDGE(pdev) && !DEVICE(pdev)->hotplugged);
} else { /* non populated slots */
@@ -440,17 +441,14 @@ static void build_append_pcihp_slots(Aml *parent_scope, PCIBus *bus,
notify_method = aml_method("DVNT", 2, AML_NOTSERIALIZED);
for (devfn = 0; devfn < ARRAY_SIZE(bus->devices); devfn++) {
- PCIDevice *pdev = bus->devices[devfn];
int slot = PCI_SLOT(devfn);
int adr = slot << 16 | PCI_FUNC(devfn);
- bool hotpluggbale_slot = true;
if (is_devfn_ignored_hotplug(devfn, bus)) {
continue;
}
- if (pdev) {
- hotpluggbale_slot = DEVICE_GET_CLASS(pdev)->hotpluggable;
+ if (bus->devices[devfn]) {
dev = aml_scope("S%.02X", devfn);
} else {
dev = aml_device("S%.02X", devfn);
@@ -464,17 +462,15 @@ static void build_append_pcihp_slots(Aml *parent_scope, PCIBus *bus,
aml_append(dev, aml_name_decl("ASUN", aml_int(slot)));
aml_append(dev, aml_pci_device_dsm());
- if (hotpluggbale_slot) {
- aml_append(dev, aml_name_decl("_SUN", aml_int(slot)));
- /* add _EJ0 to make slot hotpluggable */
- method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
- aml_append(method,
- aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))
- );
- aml_append(dev, method);
+ aml_append(dev, aml_name_decl("_SUN", aml_int(slot)));
+ /* add _EJ0 to make slot hotpluggable */
+ method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
+ aml_append(method,
+ aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))
+ );
+ aml_append(dev, method);
- build_append_pcihp_notify_entry(notify_method, slot);
- }
+ build_append_pcihp_notify_entry(notify_method, slot);
/* device descriptor has been composed, add it into parent context */
aml_append(parent_scope, dev);
@@ -493,8 +489,9 @@ void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus)
for (devfn = 0; devfn < ARRAY_SIZE(bus->devices); devfn++) {
/* ACPI spec: 1.0b: Table 6-2 _ADR Object Bus Types, PCI type */
int adr = PCI_SLOT(devfn) << 16 | PCI_FUNC(devfn);
+ PCIDevice *pdev = bus->devices[devfn];
- if (!bus->devices[devfn] || is_devfn_ignored_generic(devfn, bus)) {
+ if (!pdev || is_devfn_ignored_generic(devfn, bus)) {
continue;
}
--
2.31.1
next prev parent reply other threads:[~2023-01-12 14:32 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-12 14:02 [PATCH 00/40] x86: fixing and cleaning up ACPI PCI code part 3 Igor Mammedov
2023-01-12 14:02 ` [PATCH 01/40] tests: qtest: print device_add error before failing test Igor Mammedov
2023-01-12 14:02 ` [PATCH 02/40] tests: acpi: cleanup arguments to make them more readable Igor Mammedov
2023-01-12 14:02 ` [PATCH 03/40] tests: acpi: whitelist DSDT blobs for tests that use pci-bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 04/40] tests: acpi: extend pcihp with nested bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 05/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:02 ` [PATCH 06/40] tests: acpi: cleanup use_uefi argument usage Igor Mammedov
2023-01-12 14:02 ` [PATCH 07/40] pci_bridge: remove whitespace Igor Mammedov
2023-01-12 14:02 ` [PATCH 08/40] x86: acpi: pcihp: clean up duplicate bridge_in_acpi assignment Igor Mammedov
2023-01-12 14:02 ` [PATCH 09/40] pci: acpi hotplug: rename x-native-hotplug to x-do-not-expose-native-hotplug-cap Igor Mammedov
2023-01-12 14:02 ` [PATCH 10/40] pcihp: piix4: do not call acpi_pcihp_reset() when ACPI PCI hotplug is disabled Igor Mammedov
2023-01-12 14:02 ` [PATCH 11/40] pci: acpihp: assign BSEL only to coldplugged bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 12/40] x86: pcihp: fix invalid AML PCNT calls to hotplugged bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 13/40] tests: boot_sector_test: avoid crashing if status is not available yet Igor Mammedov
2023-01-12 14:02 ` [PATCH 14/40] tests: acpi: extend bridge tests with hotplugged bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 15/40] tests: boot_sector_test(): make it multi-shot Igor Mammedov
2023-01-12 14:02 ` [PATCH 16/40] tests: acpi: add reboot cycle to bridge test Igor Mammedov
2023-01-12 14:02 ` [PATCH 17/40] tests: acpi: whitelist DSDT before refactoring acpi based PCI hotplug machinery Igor Mammedov
2023-01-12 14:02 ` [PATCH 18/40] pcihp: drop pcihp_bridge_en dependency when composing PCNT method Igor Mammedov
2023-01-12 14:02 ` [PATCH 19/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:02 ` [PATCH 20/40] tests: acpi: whitelist DSDT before refactoring acpi based PCI hotplug machinery Igor Mammedov
2023-01-12 14:02 ` [PATCH 21/40] pcihp: compose PCNT callchain right before its user _GPE._E01 Igor Mammedov
2023-01-12 14:02 ` [PATCH 22/40] pcihp: do not put empty PCNT in DSDT Igor Mammedov
2023-01-12 14:02 ` [PATCH 23/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:02 ` [PATCH 24/40] whitelist DSDT before adding endpoint devices to bridge testcases Igor Mammedov
2023-01-12 14:02 ` [PATCH 25/40] tests: acpi: add endpoint devices to bridges Igor Mammedov
2023-01-12 14:02 ` [PATCH 26/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:02 ` [PATCH 27/40] x86: pcihp: acpi: prepare slot ignore rule to work with self describing bridges Igor Mammedov
2023-01-12 14:03 ` [PATCH 28/40] pci: acpi: wire up AcpiDevAmlIf interface to generic bridge Igor Mammedov
2023-01-12 14:03 ` [PATCH 29/40] pcihp: make bridge describe itself using AcpiDevAmlIfClass:build_dev_aml Igor Mammedov
2023-01-12 14:03 ` [PATCH 30/40] pci: make sure pci_bus_is_express() won't error out with "discards ‘const’ qualifier" Igor Mammedov
2023-01-12 14:03 ` [PATCH 31/40] pcihp: isolate rule whether slot should be described in DSDT Igor Mammedov
2023-01-12 14:03 ` [PATCH 32/40] tests: acpi: whitelist DSDT before decoupling PCI hotplug code from basic slots description Igor Mammedov
2023-01-12 14:03 ` [PATCH 33/40] pcihp: acpi: decouple hotplug and generic " Igor Mammedov
2023-01-12 14:03 ` [PATCH 34/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:03 ` [PATCH 35/40] tests: acpi: whitelist DSDT blobs before removing dynamic _DSM on coldplugged bridges Igor Mammedov
2023-01-12 14:03 ` [PATCH 36/40] pcihp: acpi: ignore coldplugged bridges when composing hotpluggable slots Igor Mammedov
2023-01-12 14:03 ` [PATCH 37/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-12 14:03 ` [PATCH 38/40] tests: acpi: whitelist DSDT before moving non-hotpluggble slots description from hotplug path Igor Mammedov
2023-01-12 14:03 ` Igor Mammedov [this message]
2023-01-12 14:03 ` [PATCH 40/40] tests: acpi: update expected blobs Igor Mammedov
2023-01-25 17:02 ` [PATCH 00/40] x86: fixing and cleaning up ACPI PCI code part 3 Igor Mammedov
2023-01-25 17:34 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230112140312.3096331-40-imammedo@redhat.com \
--to=imammedo@redhat.com \
--cc=ani@anisinha.ca \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.