Re: [PATCH v9 06/10] arm64: dts: ls1046a: Add serdes bindings

[Shawn Guo <shawnguo@kernel.org>]

On Thu, Dec 29, 2022 at 07:01:35PM -0500, Sean Anderson wrote:
> This adds bindings for the SerDes devices. They are disabled by default

s/bindings/descriptions?

The term "bindings" generally means the schema/doc in
Documentation/devicetree/bindings/.

Shawn

> to prevent any breakage on existing boards.
> 
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> ---
> 
> (no changes since v4)
> 
> Changes in v4:
> - Convert to new bindings
> 
> Changes in v3:
> - Describe modes in device tree
> 
> Changes in v2:
> - Use one phy cell for SerDes1, since no lanes can be grouped
> - Disable SerDes by default to prevent breaking boards inadvertently.
> 
>  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> index a01e3cfec77f..12adccd5caae 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> @@ -424,6 +424,24 @@ sfp: efuse@1e80000 {
>  			clock-names = "sfp";
>  		};
>  
> +		serdes1: serdes@1ea0000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			#clock-cells = <1>;
> +			compatible = "fsl,ls1046a-serdes", "fsl,lynx-10g";
> +			reg = <0x0 0x1ea0000 0x0 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		serdes2: serdes@1eb0000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			#clock-cells = <1>;
> +			compatible = "fsl,ls1046a-serdes", "fsl,lynx-10g";
> +			reg = <0x0 0x1eb0000 0x0 0x2000>;
> +			status = "disabled";
> +		};
> +
>  		dcfg: dcfg@1ee0000 {
>  			compatible = "fsl,ls1046a-dcfg", "syscon";
>  			reg = <0x0 0x1ee0000 0x0 0x1000>;
> -- 
> 2.35.1.1320.gc452695387.dirty
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy