From: William Qiu <william.qiu@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-mmc@vger.kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Jaehoon Chung <jh80.chung@samsung.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
William Qiu <william.qiu@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 0/3] StarFive's SDIO/eMMC driver support
Date: Fri, 3 Feb 2023 16:19:10 +0800 [thread overview]
Message-ID: <20230203081913.81968-1-william.qiu@starfivetech.com> (raw)
Hi,
This patchset adds initial rudimentary support for the StarFive
designware mobile storage host controller driver. And this driver will
be used in StarFive's VisionFive 2 board. The main purpose of adding
this driver is to accommodate the ultra-high speed mode of eMMC.
The last patch should be applied after the patchset [1]:
[1] https://lore.kernel.org/all/20221220011247.35560-1-hal.feng@starfivetech.com/
Changes since v2:
- Wraped commit message according to Linux coding style.
- Rephrased the description of the patches.
- Changed the description of syscon regsiter.
- Dropped redundant properties.
The patch series is based on v6.1.
William Qiu (3):
dt-bindings: mmc: Add StarFive MMC module
mmc: starfive: Add sdio/emmc driver support
riscv: dts: starfive: Add mmc node
.../bindings/mmc/starfive,jh7110-mmc.yaml | 77 ++++++++
MAINTAINERS | 6 +
.../jh7110-starfive-visionfive-2.dtsi | 23 +++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 37 ++++
drivers/mmc/host/Kconfig | 10 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/dw_mmc-starfive.c | 185 ++++++++++++++++++
7 files changed, 339 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
create mode 100644 drivers/mmc/host/dw_mmc-starfive.c
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: William Qiu <william.qiu@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-mmc@vger.kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Jaehoon Chung <jh80.chung@samsung.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
William Qiu <william.qiu@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 0/3] StarFive's SDIO/eMMC driver support
Date: Fri, 3 Feb 2023 16:19:10 +0800 [thread overview]
Message-ID: <20230203081913.81968-1-william.qiu@starfivetech.com> (raw)
Hi,
This patchset adds initial rudimentary support for the StarFive
designware mobile storage host controller driver. And this driver will
be used in StarFive's VisionFive 2 board. The main purpose of adding
this driver is to accommodate the ultra-high speed mode of eMMC.
The last patch should be applied after the patchset [1]:
[1] https://lore.kernel.org/all/20221220011247.35560-1-hal.feng@starfivetech.com/
Changes since v2:
- Wraped commit message according to Linux coding style.
- Rephrased the description of the patches.
- Changed the description of syscon regsiter.
- Dropped redundant properties.
The patch series is based on v6.1.
William Qiu (3):
dt-bindings: mmc: Add StarFive MMC module
mmc: starfive: Add sdio/emmc driver support
riscv: dts: starfive: Add mmc node
.../bindings/mmc/starfive,jh7110-mmc.yaml | 77 ++++++++
MAINTAINERS | 6 +
.../jh7110-starfive-visionfive-2.dtsi | 23 +++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 37 ++++
drivers/mmc/host/Kconfig | 10 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/dw_mmc-starfive.c | 185 ++++++++++++++++++
7 files changed, 339 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
create mode 100644 drivers/mmc/host/dw_mmc-starfive.c
--
2.34.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2023-02-03 8:21 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-03 8:19 William Qiu [this message]
2023-02-03 8:19 ` [PATCH v3 0/3] StarFive's SDIO/eMMC driver support William Qiu
2023-02-03 8:19 ` [PATCH v3 1/3] dt-bindings: mmc: Add StarFive MMC module William Qiu
2023-02-03 8:19 ` William Qiu
2023-02-03 9:00 ` Krzysztof Kozlowski
2023-02-03 9:00 ` Krzysztof Kozlowski
2023-02-03 8:19 ` [PATCH v3 2/3] mmc: starfive: Add sdio/emmc driver support William Qiu
2023-02-03 8:19 ` William Qiu
2023-02-03 8:19 ` [PATCH v3 3/3] riscv: dts: starfive: Add mmc node William Qiu
2023-02-03 8:19 ` William Qiu
2023-02-03 9:02 ` Krzysztof Kozlowski
2023-02-03 9:02 ` Krzysztof Kozlowski
2023-02-03 9:23 ` William Qiu
2023-02-03 9:23 ` William Qiu
2023-02-03 9:30 ` Krzysztof Kozlowski
2023-02-03 9:30 ` Krzysztof Kozlowski
2023-02-03 9:35 ` William Qiu
2023-02-03 9:35 ` William Qiu
2023-02-15 10:31 ` Emil Renner Berthing
2023-02-15 10:31 ` Emil Renner Berthing
2023-02-15 10:32 ` William Qiu
2023-02-15 10:32 ` William Qiu
2023-02-14 12:18 ` [PATCH v3 0/3] StarFive's SDIO/eMMC driver support Ulf Hansson
2023-02-14 12:18 ` Ulf Hansson
2023-02-15 1:56 ` William Qiu
2023-02-15 1:56 ` William Qiu
2023-02-15 10:00 ` Emil Renner Berthing
2023-02-15 10:00 ` Emil Renner Berthing
2023-02-15 10:16 ` William Qiu
2023-02-15 10:16 ` William Qiu
2023-02-15 10:22 ` Conor Dooley
2023-02-15 10:22 ` Conor Dooley
2023-02-15 10:36 ` William Qiu
2023-02-15 10:36 ` William Qiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230203081913.81968-1-william.qiu@starfivetech.com \
--to=william.qiu@starfivetech.com \
--cc=devicetree@vger.kernel.org \
--cc=jh80.chung@samsung.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.