Re: [PATCH v3 3/3] riscv: dts: starfive: Add mmc node

[William Qiu <william.qiu@starfivetech.com>]

On 2023/2/15 18:31, Emil Renner Berthing wrote:
> On Fri, 3 Feb 2023 at 09:21, William Qiu <william.qiu@starfivetech.com> wrote:
>>
>> This adds the mmc node for the StarFive JH7110 SoC.
>> Set mmco node to emmc and set mmc1 node to sd.
>>
>> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>> ---
>>  .../jh7110-starfive-visionfive-2.dtsi         | 23 ++++++++++++
>>  arch/riscv/boot/dts/starfive/jh7110.dtsi      | 37 +++++++++++++++++++
>>  2 files changed, 60 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> index c60280b89c73..e1a0248e907f 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> @@ -42,6 +42,29 @@ &rtc_osc {
>>         clock-frequency = <32768>;
>>  };
>>
>> +&mmc0 {
>> +       max-frequency = <100000000>;
>> +       bus-width = <8>;
>> +       cap-mmc-highspeed;
>> +       mmc-ddr-1_8v;
>> +       mmc-hs200-1_8v;
>> +       non-removable;
>> +       cap-mmc-hw-reset;
>> +       post-power-on-delay-ms = <200>;
>> +       status = "okay";
>> +};
>> +
>> +&mmc1 {
>> +       max-frequency = <100000000>;
>> +       bus-width = <4>;
>> +       no-sdio;ru
>> +       no-mmc;
>> +       broken-cd;
>> +       cap-sd-highspeed;
>> +       post-power-on-delay-ms = <200>;
>> +       status = "okay";
>> +};
> 
> Please add these so they're sorted alphabetically (but keep the clocks
> at the top), so there's at least some sort of system.
> 
>>  &gmac0_rmii_refin {
>>         clock-frequency = <50000000>;
>>  };
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> index 64d260ea1f29..ae1a664e7af5 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> @@ -370,6 +370,11 @@ syscrg: clock-controller@13020000 {
>>                         #reset-cells = <1>;
>>                 };
>>
>> +               sysreg: syscon@13030000 {
>> +                       compatible = "starfive,sysreg", "syscon";
>> +                       reg = <0x0 0x13030000 0x0 0x1000>;
>> +               };
>> +
>>                 gpio: gpio@13040000 {
>>                         compatible = "starfive,jh7110-sys-pinctrl";
>>                         reg = <0x0 0x13040000 0x0 0x10000>;
>> @@ -407,5 +412,37 @@ gpioa: gpio@17020000 {
>>                         gpio-controller;
>>                         #gpio-cells = <2>;
>>                 };
>> +
>> +               mmc0: mmc@16010000 {
>> +                       compatible = "starfive,jh7110-mmc";
>> +                       reg = <0x0 0x16010000 0x0 0x10000>;
>> +                       clocks = <&syscrg JH7110_SYSCLK_SDIO0_AHB>,
>> +                                <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
>> +                       clock-names = "biu","ciu";
>> +                       resets = <&syscrg JH7110_SYSRST_SDIO0_AHB>;
>> +                       reset-names = "reset";
>> +                       interrupts = <74>;
>> +                       fifo-depth = <32>;
>> +                       fifo-watermark-aligned;
>> +                       data-addr = <0>;
>> +                       starfive,sysreg = <&sysreg 0x14 0x1a 0x7c000000>;
> 
> This may need updating depending on whether you fix the driver or bindings.
> 
I'll do it then
>> +                       status = "disabled";
>> +               };
>> +
>> +               mmc1: mmc@16020000 {
>> +                       compatible = "starfive,jh7110-mmc";
>> +                       reg = <0x0 0x16020000 0x0 0x10000>;
>> +                       clocks = <&syscrg JH7110_SYSCLK_SDIO1_AHB>,
>> +                                <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
>> +                       clock-names = "biu","ciu";
>> +                       resets = <&syscrg JH7110_SYSRST_SDIO1_AHB>;
>> +                       reset-names = "reset";
>> +                       interrupts = <75>;
>> +                       fifo-depth = <32>;
>> +                       fifo-watermark-aligned;
>> +                       data-addr = <0>;
>> +                       starfive,sysreg = <&sysreg 0x9c 0x1 0x3e>;
>> +                       status = "disabled";
>> +               };
>>         };
>>  };
>> --
>> 2.34.1
>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-riscv