[PATCH v3 5/5] dts: usb: add StarFive JH7110 USB dts configuration.

[Minda Chen <minda.chen@starfivetech.com>]

USB Glue layer and Cadence USB subnode configuration,
also includes USB and PCIe phy dts configuration.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         |  7 +++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 54 +++++++++++++++++++
 2 files changed, 61 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index a132debb9b53..c64476aebc1a 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -236,3 +236,10 @@
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
+
+&usb0 {
+	status = "okay";
+	usbdrd_cdns3: usb@0 {
+		dr_mode = "peripheral";
+	};
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index f70a4ed47eb4..17722fd1be62 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -362,6 +362,60 @@
 			status = "disabled";
 		};
 
+		usb0: usb@10100000 {
+			compatible = "starfive,jh7110-usb";
+			clocks = <&stgcrg JH7110_STGCLK_USB0_LPM>,
+				 <&stgcrg JH7110_STGCLK_USB0_STB>,
+				 <&stgcrg JH7110_STGCLK_USB0_APB>,
+				 <&stgcrg JH7110_STGCLK_USB0_AXI>,
+				 <&stgcrg JH7110_STGCLK_USB0_UTMI_APB>;
+			clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
+			resets = <&stgcrg JH7110_STGRST_USB0_PWRUP>,
+				 <&stgcrg JH7110_STGRST_USB0_APB>,
+				 <&stgcrg JH7110_STGRST_USB0_AXI>,
+				 <&stgcrg JH7110_STGRST_USB0_UTMI_APB>;
+			starfive,stg-syscon = <&stg_syscon 0x4 0xc4 0x148 0x1f4>;
+			starfive,sys-syscon = <&sys_syscon 0x18>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x10100000 0x100000>;
+
+			usbdrd_cdns3: usb@0 {
+				compatible = "cdns,usb3";
+				reg = <0x0 0x10000>,
+				      <0x10000 0x10000>,
+				      <0x20000 0x10000>;
+				reg-names = "otg", "xhci", "dev";
+				interrupts = <100>, <108>, <110>;
+				interrupt-names = "host", "peripheral", "otg";
+				phys = <&usbphy0>;
+				phy-names = "cdns3,usb2-phy";
+				maximum-speed = "super-speed";
+			};
+		};
+
+		usbphy0: phy@10200000 {
+			compatible = "starfive,jh7110-usb-phy";
+			reg = <0x0 0x10200000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_USB_125M>,
+				 <&stgcrg JH7110_STGCLK_USB0_APP_125>;
+			clock-names = "125m", "app_125";
+			#phy-cells = <0>;
+		};
+
+		pciephy0: phy@10210000 {
+			compatible = "starfive,jh7110-pcie-phy";
+			reg = <0x0 0x10210000 0x0 0x10000>;
+			#phy-cells = <0>;
+		};
+
+		pciephy1: phy@10220000 {
+			compatible = "starfive,jh7110-pcie-phy";
+			reg = <0x0 0x10220000 0x0 0x10000>;
+			#phy-cells = <0>;
+		};
+
 		stgcrg: clock-controller@10230000 {
 			compatible = "starfive,jh7110-stgcrg";
 			reg = <0x0 0x10230000 0x0 0x10000>;
-- 
2.17.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy