All of lore.kernel.org
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@kernel.org>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
	Dong Aisheng <aisheng.dong@nxp.com>,
	Guoniu Zhou <guoniu.zhou@nxp.com>,
	Christian Hemp <c.hemp@phytec.de>,
	linux-media@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] [v2] media: nxp: imx8-isi: fix buiding on 32-bit
Date: Tue, 18 Apr 2023 08:11:43 +0200	[thread overview]
Message-ID: <20230418061155.2923515-1-arnd@kernel.org> (raw)

From: Arnd Bergmann <arnd@arndb.de>

The #if check is wrong, leading to a build failure:

drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c: In function 'mxc_isi_channel_set_inbuf':
drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:33:5: error: "CONFIG_ARCH_DMA_ADDR_T_64BIT" is not defined, evaluates to 0 [-Werror=undef]
   33 | #if CONFIG_ARCH_DMA_ADDR_T_64BIT
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

This could just be an #ifdef, but it seems nicer to just remove
the check entirely. Apparently the only reason for the #ifdef
is to avoid another warning:

drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:55:24: error: right shift count >= width of type [-Werror=shift-count-overflow]

But this is best avoided by using the lower_32_bits()/upper_32_bits()
helpers.

Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v2: whitespace fixup
---
 .../media/platform/nxp/imx8-isi/imx8-isi-hw.c | 41 ++++++++++---------
 1 file changed, 21 insertions(+), 20 deletions(-)

diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
index db538f3d88ec..19e80b95ffea 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
@@ -29,11 +29,10 @@ static inline void mxc_isi_write(struct mxc_isi_pipe *pipe, u32 reg, u32 val)
 
 void mxc_isi_channel_set_inbuf(struct mxc_isi_pipe *pipe, dma_addr_t dma_addr)
 {
-	mxc_isi_write(pipe, CHNL_IN_BUF_ADDR, dma_addr);
-#if CONFIG_ARCH_DMA_ADDR_T_64BIT
+	mxc_isi_write(pipe, CHNL_IN_BUF_ADDR, lower_32_bits(dma_addr));
 	if (pipe->isi->pdata->has_36bit_dma)
-		mxc_isi_write(pipe, CHNL_IN_BUF_XTND_ADDR, dma_addr >> 32);
-#endif
+		mxc_isi_write(pipe, CHNL_IN_BUF_XTND_ADDR,
+			      upper_32_bits(dma_addr));
 }
 
 void mxc_isi_channel_set_outbuf(struct mxc_isi_pipe *pipe,
@@ -45,34 +44,36 @@ void mxc_isi_channel_set_outbuf(struct mxc_isi_pipe *pipe,
 	val = mxc_isi_read(pipe, CHNL_OUT_BUF_CTRL);
 
 	if (buf_id == MXC_ISI_BUF1) {
-		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_Y, dma_addrs[0]);
-		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_U, dma_addrs[1]);
-		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_V, dma_addrs[2]);
-#if CONFIG_ARCH_DMA_ADDR_T_64BIT
+		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_Y,
+			      lower_32_bits(dma_addrs[0]));
+		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_U,
+			      lower_32_bits(dma_addrs[1]));
+		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_V,
+			      lower_32_bits(dma_addrs[2]));
 		if (pipe->isi->pdata->has_36bit_dma) {
 			mxc_isi_write(pipe, CHNL_Y_BUF1_XTND_ADDR,
-				      dma_addrs[0] >> 32);
+				      upper_32_bits(dma_addrs[0]));
 			mxc_isi_write(pipe, CHNL_U_BUF1_XTND_ADDR,
-				      dma_addrs[1] >> 32);
+				      upper_32_bits(dma_addrs[1]));
 			mxc_isi_write(pipe, CHNL_V_BUF1_XTND_ADDR,
-				      dma_addrs[2] >> 32);
+				      upper_32_bits(dma_addrs[2]));
 		}
-#endif
 		val ^= CHNL_OUT_BUF_CTRL_LOAD_BUF1_ADDR;
 	} else  {
-		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_Y, dma_addrs[0]);
-		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_U, dma_addrs[1]);
-		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_V, dma_addrs[2]);
-#if CONFIG_ARCH_DMA_ADDR_T_64BIT
+		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_Y,
+			      lower_32_bits(dma_addrs[0]));
+		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_U,
+			      lower_32_bits(dma_addrs[1]));
+		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_V,
+			      lower_32_bits(dma_addrs[2]));
 		if (pipe->isi->pdata->has_36bit_dma) {
 			mxc_isi_write(pipe, CHNL_Y_BUF2_XTND_ADDR,
-				      dma_addrs[0] >> 32);
+				      upper_32_bits(dma_addrs[0]));
 			mxc_isi_write(pipe, CHNL_U_BUF2_XTND_ADDR,
-				      dma_addrs[1] >> 32);
+				      upper_32_bits(dma_addrs[1]));
 			mxc_isi_write(pipe, CHNL_V_BUF2_XTND_ADDR,
-				      dma_addrs[2] >> 32);
+				      upper_32_bits(dma_addrs[2]));
 		}
-#endif
 		val ^= CHNL_OUT_BUF_CTRL_LOAD_BUF2_ADDR;
 	}
 
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
	Dong Aisheng <aisheng.dong@nxp.com>,
	Guoniu Zhou <guoniu.zhou@nxp.com>,
	Christian Hemp <c.hemp@phytec.de>,
	linux-media@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] [v2] media: nxp: imx8-isi: fix buiding on 32-bit
Date: Tue, 18 Apr 2023 08:11:43 +0200	[thread overview]
Message-ID: <20230418061155.2923515-1-arnd@kernel.org> (raw)

From: Arnd Bergmann <arnd@arndb.de>

The #if check is wrong, leading to a build failure:

drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c: In function 'mxc_isi_channel_set_inbuf':
drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:33:5: error: "CONFIG_ARCH_DMA_ADDR_T_64BIT" is not defined, evaluates to 0 [-Werror=undef]
   33 | #if CONFIG_ARCH_DMA_ADDR_T_64BIT
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

This could just be an #ifdef, but it seems nicer to just remove
the check entirely. Apparently the only reason for the #ifdef
is to avoid another warning:

drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:55:24: error: right shift count >= width of type [-Werror=shift-count-overflow]

But this is best avoided by using the lower_32_bits()/upper_32_bits()
helpers.

Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v2: whitespace fixup
---
 .../media/platform/nxp/imx8-isi/imx8-isi-hw.c | 41 ++++++++++---------
 1 file changed, 21 insertions(+), 20 deletions(-)

diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
index db538f3d88ec..19e80b95ffea 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
@@ -29,11 +29,10 @@ static inline void mxc_isi_write(struct mxc_isi_pipe *pipe, u32 reg, u32 val)
 
 void mxc_isi_channel_set_inbuf(struct mxc_isi_pipe *pipe, dma_addr_t dma_addr)
 {
-	mxc_isi_write(pipe, CHNL_IN_BUF_ADDR, dma_addr);
-#if CONFIG_ARCH_DMA_ADDR_T_64BIT
+	mxc_isi_write(pipe, CHNL_IN_BUF_ADDR, lower_32_bits(dma_addr));
 	if (pipe->isi->pdata->has_36bit_dma)
-		mxc_isi_write(pipe, CHNL_IN_BUF_XTND_ADDR, dma_addr >> 32);
-#endif
+		mxc_isi_write(pipe, CHNL_IN_BUF_XTND_ADDR,
+			      upper_32_bits(dma_addr));
 }
 
 void mxc_isi_channel_set_outbuf(struct mxc_isi_pipe *pipe,
@@ -45,34 +44,36 @@ void mxc_isi_channel_set_outbuf(struct mxc_isi_pipe *pipe,
 	val = mxc_isi_read(pipe, CHNL_OUT_BUF_CTRL);
 
 	if (buf_id == MXC_ISI_BUF1) {
-		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_Y, dma_addrs[0]);
-		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_U, dma_addrs[1]);
-		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_V, dma_addrs[2]);
-#if CONFIG_ARCH_DMA_ADDR_T_64BIT
+		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_Y,
+			      lower_32_bits(dma_addrs[0]));
+		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_U,
+			      lower_32_bits(dma_addrs[1]));
+		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_V,
+			      lower_32_bits(dma_addrs[2]));
 		if (pipe->isi->pdata->has_36bit_dma) {
 			mxc_isi_write(pipe, CHNL_Y_BUF1_XTND_ADDR,
-				      dma_addrs[0] >> 32);
+				      upper_32_bits(dma_addrs[0]));
 			mxc_isi_write(pipe, CHNL_U_BUF1_XTND_ADDR,
-				      dma_addrs[1] >> 32);
+				      upper_32_bits(dma_addrs[1]));
 			mxc_isi_write(pipe, CHNL_V_BUF1_XTND_ADDR,
-				      dma_addrs[2] >> 32);
+				      upper_32_bits(dma_addrs[2]));
 		}
-#endif
 		val ^= CHNL_OUT_BUF_CTRL_LOAD_BUF1_ADDR;
 	} else  {
-		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_Y, dma_addrs[0]);
-		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_U, dma_addrs[1]);
-		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_V, dma_addrs[2]);
-#if CONFIG_ARCH_DMA_ADDR_T_64BIT
+		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_Y,
+			      lower_32_bits(dma_addrs[0]));
+		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_U,
+			      lower_32_bits(dma_addrs[1]));
+		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_V,
+			      lower_32_bits(dma_addrs[2]));
 		if (pipe->isi->pdata->has_36bit_dma) {
 			mxc_isi_write(pipe, CHNL_Y_BUF2_XTND_ADDR,
-				      dma_addrs[0] >> 32);
+				      upper_32_bits(dma_addrs[0]));
 			mxc_isi_write(pipe, CHNL_U_BUF2_XTND_ADDR,
-				      dma_addrs[1] >> 32);
+				      upper_32_bits(dma_addrs[1]));
 			mxc_isi_write(pipe, CHNL_V_BUF2_XTND_ADDR,
-				      dma_addrs[2] >> 32);
+				      upper_32_bits(dma_addrs[2]));
 		}
-#endif
 		val ^= CHNL_OUT_BUF_CTRL_LOAD_BUF2_ADDR;
 	}
 
-- 
2.39.2


             reply	other threads:[~2023-04-18  6:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-18  6:11 Arnd Bergmann [this message]
2023-04-18  6:11 ` [PATCH] [v2] media: nxp: imx8-isi: fix buiding on 32-bit Arnd Bergmann
2023-04-18  6:47 ` Laurent Pinchart
2023-04-18  6:47   ` Laurent Pinchart
2023-04-18  6:52   ` Hans Verkuil
2023-04-18  6:52     ` Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230418061155.2923515-1-arnd@kernel.org \
    --to=arnd@kernel.org \
    --cc=aisheng.dong@nxp.com \
    --cc=arnd@arndb.de \
    --cc=c.hemp@phytec.de \
    --cc=festevam@gmail.com \
    --cc=guoniu.zhou@nxp.com \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=kernel@pengutronix.de \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.