From: Romain Perier <romain.perier@gmail.com>
To: Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Daniel Palmer <daniel@0x0f.com>,
Romain Perier <romain.perier@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] Add RTC for MStar SSD20xD SoCs
Date: Wed, 17 May 2023 16:41:41 +0200 [thread overview]
Message-ID: <20230517144144.365631-1-romain.perier@gmail.com> (raw)
This patches series adds a new driver for the RTC found in the Mstar
SSD20xD SoCs. It adds a basic rtc driver, the corresponding devicetree
bindings and its documentation.
The rtctest (from selftests) has been passed on this driver, with the
following output:
# rtctest
TAP version 13
1..8
# Starting 8 tests from 1 test cases.
# RUN rtc.date_read ...
# rtctest.c:52:date_read:Current RTC date/time is 17/05/2023 15:58:12.
# OK rtc.date_read
ok 1 rtc.date_read
# RUN rtc.date_read_loop ...
# rtctest.c:95:date_read_loop:Continuously reading RTC time for 30s (with 11ms breaks after every read).
# rtctest.c:122:date_read_loop:Performed 888 RTC time reads.
# OK rtc.date_read_loop
ok 2 rtc.date_read_loop
# RUN rtc.uie_read ...
# rtctest.c:137:uie_read:skip update IRQs not supported.
# OK rtc.uie_read
ok 3 rtc.uie_read
# RUN rtc.uie_select ...
# rtctest.c:166:uie_select:skip update IRQs not supported.
# OK rtc.uie_select
ok 4 rtc.uie_select
# RUN rtc.alarm_alm_set ...
# rtctest.c:214:alarm_alm_set:skip alarms are not supported.
# OK rtc.alarm_alm_set
ok 5 rtc.alarm_alm_set
# RUN rtc.alarm_wkalm_set ...
# rtctest.c:274:alarm_wkalm_set:skip alarms are not supported.
# OK rtc.alarm_wkalm_set
ok 6 rtc.alarm_wkalm_set
# RUN rtc.alarm_alm_set_minute ...
# rtctest.c:324:alarm_alm_set_minute:skip alarms are not supported.
# OK rtc.alarm_alm_set_minute
ok 7 rtc.alarm_alm_set_minute
# RUN rtc.alarm_wkalm_set_minute ...
# rtctest.c:384:alarm_wkalm_set_minute:skip alarms are not supported.
# OK rtc.alarm_wkalm_set_minute
ok 8 rtc.alarm_wkalm_set_minute
# PASSED: 8 / 8 tests passed.
# Totals: pass:8 fail:0 xfail:0 xpass:0 skip:0 error:0
Romain Perier (3):
rtc: Add support for the SSD20xD RTC
dt-bindings: rtc: Add Mstar SSD20xD RTC devicetree bindings
documentation
ARM: dts: mstar: Enable rtc for SSD20xD
.../bindings/rtc/mstar,ssd20xd-rtc.yaml | 37 +++
arch/arm/boot/dts/mstar-infinity2m.dtsi | 5 +
drivers/rtc/Kconfig | 11 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-ssd20xd.c | 249 ++++++++++++++++++
5 files changed, 303 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/mstar,ssd20xd-rtc.yaml
create mode 100644 drivers/rtc/rtc-ssd20xd.c
--
2.39.2
WARNING: multiple messages have this Message-ID (diff)
From: Romain Perier <romain.perier@gmail.com>
To: Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Daniel Palmer <daniel@0x0f.com>,
Romain Perier <romain.perier@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] Add RTC for MStar SSD20xD SoCs
Date: Wed, 17 May 2023 16:41:41 +0200 [thread overview]
Message-ID: <20230517144144.365631-1-romain.perier@gmail.com> (raw)
This patches series adds a new driver for the RTC found in the Mstar
SSD20xD SoCs. It adds a basic rtc driver, the corresponding devicetree
bindings and its documentation.
The rtctest (from selftests) has been passed on this driver, with the
following output:
# rtctest
TAP version 13
1..8
# Starting 8 tests from 1 test cases.
# RUN rtc.date_read ...
# rtctest.c:52:date_read:Current RTC date/time is 17/05/2023 15:58:12.
# OK rtc.date_read
ok 1 rtc.date_read
# RUN rtc.date_read_loop ...
# rtctest.c:95:date_read_loop:Continuously reading RTC time for 30s (with 11ms breaks after every read).
# rtctest.c:122:date_read_loop:Performed 888 RTC time reads.
# OK rtc.date_read_loop
ok 2 rtc.date_read_loop
# RUN rtc.uie_read ...
# rtctest.c:137:uie_read:skip update IRQs not supported.
# OK rtc.uie_read
ok 3 rtc.uie_read
# RUN rtc.uie_select ...
# rtctest.c:166:uie_select:skip update IRQs not supported.
# OK rtc.uie_select
ok 4 rtc.uie_select
# RUN rtc.alarm_alm_set ...
# rtctest.c:214:alarm_alm_set:skip alarms are not supported.
# OK rtc.alarm_alm_set
ok 5 rtc.alarm_alm_set
# RUN rtc.alarm_wkalm_set ...
# rtctest.c:274:alarm_wkalm_set:skip alarms are not supported.
# OK rtc.alarm_wkalm_set
ok 6 rtc.alarm_wkalm_set
# RUN rtc.alarm_alm_set_minute ...
# rtctest.c:324:alarm_alm_set_minute:skip alarms are not supported.
# OK rtc.alarm_alm_set_minute
ok 7 rtc.alarm_alm_set_minute
# RUN rtc.alarm_wkalm_set_minute ...
# rtctest.c:384:alarm_wkalm_set_minute:skip alarms are not supported.
# OK rtc.alarm_wkalm_set_minute
ok 8 rtc.alarm_wkalm_set_minute
# PASSED: 8 / 8 tests passed.
# Totals: pass:8 fail:0 xfail:0 xpass:0 skip:0 error:0
Romain Perier (3):
rtc: Add support for the SSD20xD RTC
dt-bindings: rtc: Add Mstar SSD20xD RTC devicetree bindings
documentation
ARM: dts: mstar: Enable rtc for SSD20xD
.../bindings/rtc/mstar,ssd20xd-rtc.yaml | 37 +++
arch/arm/boot/dts/mstar-infinity2m.dtsi | 5 +
drivers/rtc/Kconfig | 11 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-ssd20xd.c | 249 ++++++++++++++++++
5 files changed, 303 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/mstar,ssd20xd-rtc.yaml
create mode 100644 drivers/rtc/rtc-ssd20xd.c
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-05-17 14:41 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-17 14:41 Romain Perier [this message]
2023-05-17 14:41 ` [PATCH 0/3] Add RTC for MStar SSD20xD SoCs Romain Perier
2023-05-17 14:41 ` [PATCH 1/3] rtc: Add support for the SSD20xD RTC Romain Perier
2023-05-17 14:41 ` Romain Perier
2023-05-29 22:40 ` Alexandre Belloni
2023-05-29 22:40 ` Alexandre Belloni
2023-05-29 23:06 ` Daniel Palmer
2023-05-29 23:06 ` Daniel Palmer
2023-05-17 14:41 ` [PATCH 2/3] dt-bindings: rtc: Add Mstar SSD20xD RTC devicetree bindings documentation Romain Perier
2023-05-17 14:41 ` Romain Perier
2023-05-17 17:44 ` Conor Dooley
2023-05-17 17:44 ` Conor Dooley
2023-05-22 6:47 ` Romain Perier
2023-05-22 6:47 ` Romain Perier
2023-05-22 7:16 ` Conor Dooley
2023-05-22 7:16 ` Conor Dooley
2023-05-18 8:24 ` Krzysztof Kozlowski
2023-05-18 8:24 ` Krzysztof Kozlowski
2023-05-22 11:27 ` Romain Perier
2023-05-22 11:27 ` Romain Perier
2023-05-30 8:01 ` Krzysztof Kozlowski
2023-05-30 8:01 ` Krzysztof Kozlowski
2023-05-30 23:12 ` Daniel Palmer
2023-05-30 23:12 ` Daniel Palmer
2023-05-31 6:49 ` Krzysztof Kozlowski
2023-05-31 6:49 ` Krzysztof Kozlowski
2023-05-31 22:26 ` Daniel Palmer
2023-05-31 22:26 ` Daniel Palmer
2023-05-17 14:41 ` [PATCH 3/3] ARM: dts: mstar: Enable rtc for SSD20xD Romain Perier
2023-05-17 14:41 ` Romain Perier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230517144144.365631-1-romain.perier@gmail.com \
--to=romain.perier@gmail.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=daniel@0x0f.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.