All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: marex@denx.de, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, conor+dt@kernel.org,
	bhelgaas@google.com, Fabio Estevam <festevam@denx.de>
Subject: [PATCH v6 4/5] ARM: dts: imx6sx: Add LDB support
Date: Mon, 22 May 2023 17:14:03 -0300	[thread overview]
Message-ID: <20230522201404.660242-4-festevam@gmail.com> (raw)
In-Reply-To: <20230522201404.660242-1-festevam@gmail.com>

From: Fabio Estevam <festevam@denx.de>

i.MX6SX has an LVDS controller that is connected to the eLCDIF.

Add support for it.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Changes since v5:
- Dropped fsl,imx6q-iomuxc-gpr" and "reg-names" (Marek).

 arch/arm/boot/dts/imx6sx.dtsi | 43 ++++++++++++++++++++++++++++++++---
 1 file changed, 40 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 4233943a1cca..8dd38107bed2 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -841,10 +841,39 @@ iomuxc: pinctrl@20e0000 {
 				reg = <0x020e0000 0x4000>;
 			};
 
-			gpr: iomuxc-gpr@20e4000 {
-				compatible = "fsl,imx6sx-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
+			gpr: syscon@20e4000 {
+				compatible = "fsl,imx6sx-iomuxc-gpr", "syscon";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x020e4000 0x4000>;
+
+				lvds_bridge: bridge@18 {
+					compatible = "fsl,imx6sx-ldb";
+					reg = <0x18 0x4>;
+					clocks = <&clks IMX6SX_CLK_LDB_DI0>;
+					clock-names = "ldb";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							ldb_from_lcdif1: endpoint {
+								remote-endpoint = <&lcdif1_to_ldb>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ldb_lvds_ch0: endpoint {
+							};
+						};
+					};
+				};
 			};
 
 			sdma: dma-controller@20ec000 {
@@ -1278,6 +1307,14 @@ lcdif1: lcdif@2220000 {
 					clock-names = "pix", "axi", "disp_axi";
 					power-domains = <&pd_disp>;
 					status = "disabled";
+
+					ports {
+						port {
+							lcdif1_to_ldb: endpoint {
+								remote-endpoint = <&ldb_from_lcdif1>;
+							};
+						};
+					};
 				};
 
 				lcdif2: lcdif@2224000 {
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: marex@denx.de, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, conor+dt@kernel.org,
	bhelgaas@google.com, Fabio Estevam <festevam@denx.de>
Subject: [PATCH v6 4/5] ARM: dts: imx6sx: Add LDB support
Date: Mon, 22 May 2023 17:14:03 -0300	[thread overview]
Message-ID: <20230522201404.660242-4-festevam@gmail.com> (raw)
In-Reply-To: <20230522201404.660242-1-festevam@gmail.com>

From: Fabio Estevam <festevam@denx.de>

i.MX6SX has an LVDS controller that is connected to the eLCDIF.

Add support for it.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Changes since v5:
- Dropped fsl,imx6q-iomuxc-gpr" and "reg-names" (Marek).

 arch/arm/boot/dts/imx6sx.dtsi | 43 ++++++++++++++++++++++++++++++++---
 1 file changed, 40 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 4233943a1cca..8dd38107bed2 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -841,10 +841,39 @@ iomuxc: pinctrl@20e0000 {
 				reg = <0x020e0000 0x4000>;
 			};
 
-			gpr: iomuxc-gpr@20e4000 {
-				compatible = "fsl,imx6sx-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
+			gpr: syscon@20e4000 {
+				compatible = "fsl,imx6sx-iomuxc-gpr", "syscon";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x020e4000 0x4000>;
+
+				lvds_bridge: bridge@18 {
+					compatible = "fsl,imx6sx-ldb";
+					reg = <0x18 0x4>;
+					clocks = <&clks IMX6SX_CLK_LDB_DI0>;
+					clock-names = "ldb";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							ldb_from_lcdif1: endpoint {
+								remote-endpoint = <&lcdif1_to_ldb>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ldb_lvds_ch0: endpoint {
+							};
+						};
+					};
+				};
 			};
 
 			sdma: dma-controller@20ec000 {
@@ -1278,6 +1307,14 @@ lcdif1: lcdif@2220000 {
 					clock-names = "pix", "axi", "disp_axi";
 					power-domains = <&pd_disp>;
 					status = "disabled";
+
+					ports {
+						port {
+							lcdif1_to_ldb: endpoint {
+								remote-endpoint = <&ldb_from_lcdif1>;
+							};
+						};
+					};
 				};
 
 				lcdif2: lcdif@2224000 {
-- 
2.34.1


  parent reply	other threads:[~2023-05-22 20:15 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-22 20:14 [PATCH v6 1/5] PCI: imx6: Use a more specific i.MX6SX GPR compatible Fabio Estevam
2023-05-22 20:14 ` Fabio Estevam
2023-05-22 20:14 ` [PATCH v6 2/5] dt-bindings: display: bridge: ldb: Adjust imx6sx entries Fabio Estevam
2023-05-22 20:14   ` Fabio Estevam
2023-05-22 22:06   ` Conor Dooley
2023-05-22 22:06     ` Conor Dooley
2023-05-23  2:27   ` Marek Vasut
2023-05-23  2:27     ` Marek Vasut
2023-05-22 20:14 ` [PATCH v6 3/5] dt-bindings: soc: Add i.MX6SX General Purpose Register Fabio Estevam
2023-05-22 20:14   ` Fabio Estevam
2023-05-22 21:32   ` Rob Herring
2023-05-22 21:32     ` Rob Herring
2023-05-22 21:53     ` Fabio Estevam
2023-05-22 21:53       ` Fabio Estevam
2023-06-07 20:31       ` Rob Herring
2023-06-07 20:31         ` Rob Herring
2023-06-07 21:07         ` Fabio Estevam
2023-06-07 21:07           ` Fabio Estevam
2023-05-22 22:10   ` Conor Dooley
2023-05-22 22:10     ` Conor Dooley
2023-05-23  2:28   ` Marek Vasut
2023-05-23  2:28     ` Marek Vasut
2023-05-22 20:14 ` Fabio Estevam [this message]
2023-05-22 20:14   ` [PATCH v6 4/5] ARM: dts: imx6sx: Add LDB support Fabio Estevam
2023-05-23  2:29   ` Marek Vasut
2023-05-23  2:29     ` Marek Vasut
2023-05-23 11:34     ` Fabio Estevam
2023-05-23 11:34       ` Fabio Estevam
2023-05-23 12:56       ` Marek Vasut
2023-05-23 12:56         ` Marek Vasut
2023-05-22 20:14 ` [PATCH v6 5/5] soc: imx: imx6sx-gpr: Introduce a GPR driver Fabio Estevam
2023-05-22 20:14   ` Fabio Estevam
2023-05-23  2:30   ` Marek Vasut
2023-05-23  2:30     ` Marek Vasut
2023-05-23 11:44     ` Fabio Estevam
2023-05-23 11:44       ` Fabio Estevam
2023-05-23 12:57       ` Marek Vasut
2023-05-23 12:57         ` Marek Vasut
2023-05-23 21:13         ` Fabio Estevam
2023-05-23 21:13           ` Fabio Estevam
2023-05-23 23:30           ` Marek Vasut
2023-05-23 23:30             ` Marek Vasut
2023-05-23 23:41             ` Fabio Estevam
2023-05-23 23:41               ` Fabio Estevam
2023-05-23  2:27 ` [PATCH v6 1/5] PCI: imx6: Use a more specific i.MX6SX GPR compatible Marek Vasut
2023-05-23  2:27   ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230522201404.660242-4-festevam@gmail.com \
    --to=festevam@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@denx.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marex@denx.de \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.