All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Reichel <sre@kernel.org>
To: Sebastian Reichel <sre@kernel.org>
Cc: Gerald Loacker <gerald.loacker@wolfvision.net>,
	Michael Riesch <michael.riesch@wolfvision.net>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@gmail.com>,
	Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	devicetree@vger.kernel.org
Subject: [PATCH v3 13/19] drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 support
Date: Fri, 14 Jul 2023 03:37:50 +0200	[thread overview]
Message-ID: <20230714013756.1546769-14-sre@kernel.org> (raw)
In-Reply-To: <20230714013756.1546769-1-sre@kernel.org>

UNI-T UTi260b has a Inanbo T28CP45TN89 v17 panel. I could not find
proper documentation for the panel apart from a technical drawing, but
according to the vendor U-Boot it is based on a Sitronix st7789v chip.
I generated the init sequence by modifying the default one until proper
graphics output has been seen on the device.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
 .../gpu/drm/panel/panel-sitronix-st7789v.c    | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
index 94c805c79d05..55e475471f43 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
@@ -173,6 +173,21 @@ static const struct drm_display_mode default_mode = {
 	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
 };
 
+static const struct drm_display_mode t28cp45tn89_mode = {
+	.clock = 6008,
+	.hdisplay = 240,
+	.hsync_start = 240 + 38,
+	.hsync_end = 240 + 38 + 10,
+	.htotal = 240 + 38 + 10 + 10,
+	.vdisplay = 320,
+	.vsync_start = 320 + 8,
+	.vsync_end = 320 + 8 + 4,
+	.vtotal = 320 + 8 + 4 + 4,
+	.width_mm = 43,
+	.height_mm = 57,
+	.flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
 static const struct st7789_panel_info default_panel = {
 	.mode = &default_mode,
 	.invert_mode = true,
@@ -181,6 +196,14 @@ static const struct st7789_panel_info default_panel = {
 		     DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
 };
 
+static const struct st7789_panel_info t28cp45tn89_panel = {
+	.mode = &t28cp45tn89_mode,
+	.invert_mode = false,
+	.bus_format = MEDIA_BUS_FMT_RGB565_1X16,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH |
+		     DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
+};
+
 static int st7789v_get_modes(struct drm_panel *panel,
 			     struct drm_connector *connector)
 {
@@ -446,12 +469,14 @@ static void st7789v_remove(struct spi_device *spi)
 
 static const struct spi_device_id st7789v_spi_id[] = {
 	{ "st7789v", (unsigned long) &default_panel },
+	{ "t28cp45tn89-v17", (unsigned long) &t28cp45tn89_panel },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, st7789v_spi_id);
 
 static const struct of_device_id st7789v_of_match[] = {
 	{ .compatible = "sitronix,st7789v", .data = &default_panel },
+	{ .compatible = "inanbo,t28cp45tn89-v17", .data = &t28cp45tn89_panel },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, st7789v_of_match);
-- 
2.40.1


WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Reichel <sre@kernel.org>
To: Sebastian Reichel <sre@kernel.org>
Cc: devicetree@vger.kernel.org,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Gerald Loacker <gerald.loacker@wolfvision.net>,
	Sam Ravnborg <sam@ravnborg.org>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Michael Riesch <michael.riesch@wolfvision.net>,
	Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH v3 13/19] drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 support
Date: Fri, 14 Jul 2023 03:37:50 +0200	[thread overview]
Message-ID: <20230714013756.1546769-14-sre@kernel.org> (raw)
In-Reply-To: <20230714013756.1546769-1-sre@kernel.org>

UNI-T UTi260b has a Inanbo T28CP45TN89 v17 panel. I could not find
proper documentation for the panel apart from a technical drawing, but
according to the vendor U-Boot it is based on a Sitronix st7789v chip.
I generated the init sequence by modifying the default one until proper
graphics output has been seen on the device.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
 .../gpu/drm/panel/panel-sitronix-st7789v.c    | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
index 94c805c79d05..55e475471f43 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
@@ -173,6 +173,21 @@ static const struct drm_display_mode default_mode = {
 	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
 };
 
+static const struct drm_display_mode t28cp45tn89_mode = {
+	.clock = 6008,
+	.hdisplay = 240,
+	.hsync_start = 240 + 38,
+	.hsync_end = 240 + 38 + 10,
+	.htotal = 240 + 38 + 10 + 10,
+	.vdisplay = 320,
+	.vsync_start = 320 + 8,
+	.vsync_end = 320 + 8 + 4,
+	.vtotal = 320 + 8 + 4 + 4,
+	.width_mm = 43,
+	.height_mm = 57,
+	.flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
 static const struct st7789_panel_info default_panel = {
 	.mode = &default_mode,
 	.invert_mode = true,
@@ -181,6 +196,14 @@ static const struct st7789_panel_info default_panel = {
 		     DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
 };
 
+static const struct st7789_panel_info t28cp45tn89_panel = {
+	.mode = &t28cp45tn89_mode,
+	.invert_mode = false,
+	.bus_format = MEDIA_BUS_FMT_RGB565_1X16,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH |
+		     DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
+};
+
 static int st7789v_get_modes(struct drm_panel *panel,
 			     struct drm_connector *connector)
 {
@@ -446,12 +469,14 @@ static void st7789v_remove(struct spi_device *spi)
 
 static const struct spi_device_id st7789v_spi_id[] = {
 	{ "st7789v", (unsigned long) &default_panel },
+	{ "t28cp45tn89-v17", (unsigned long) &t28cp45tn89_panel },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, st7789v_spi_id);
 
 static const struct of_device_id st7789v_of_match[] = {
 	{ .compatible = "sitronix,st7789v", .data = &default_panel },
+	{ .compatible = "inanbo,t28cp45tn89-v17", .data = &t28cp45tn89_panel },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, st7789v_of_match);
-- 
2.40.1


  parent reply	other threads:[~2023-07-14  1:38 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-14  1:37 [PATCH v3 00/19] Sitronix ST7789V improvements Sebastian Reichel
2023-07-14  1:37 ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 01/19] dt-bindings: vendor-prefixes: add Inanbo Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 02/19] dt-bindings: display: st7789v: add Inanbo T28CP45TN89 Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 03/19] drm/panel: sitronix-st7789v: add SPI ID table Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 04/19] drm/panel: sitronix-st7789v: remove unused constants Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 05/19] drm/panel: sitronix-st7789v: make reset GPIO optional Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 06/19] drm/panel: sitronix-st7789v: simplify st7789v_spi_write Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 07/19] drm/panel: sitronix-st7789v: improve error handling Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 08/19] drm/panel: sitronix-st7789v: avoid hardcoding mode info Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 09/19] drm/panel: sitronix-st7789v: avoid hardcoding panel size Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 10/19] drm/panel: sitronix-st7789v: add media bus format Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 11/19] drm/panel: sitronix-st7789v: avoid hardcoding invert mode Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 12/19] drm/panel: sitronix-st7789v: avoid hardcoding polarity info Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` Sebastian Reichel [this message]
2023-07-14  1:37   ` [PATCH v3 13/19] drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 support Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 14/19] dt-bindings: display: st7789v: Add the edt,et028013dma panel compatible Sebastian Reichel
2023-07-14  1:37   ` [PATCH v3 14/19] dt-bindings: display: st7789v: Add the edt, et028013dma " Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 15/19] dt-bindings: display: st7789v: bound the number of Rx data lines Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 16/19] drm/panel: sitronix-st7789v: Use 9 bits per spi word by default Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 17/19] drm/panel: sitronix-st7789v: Clarify a definition Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 18/19] drm/panel: sitronix-st7789v: Add EDT ET028013DMA panel support Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-14  1:37 ` [PATCH v3 19/19] drm/panel: sitronix-st7789v: Check display ID Sebastian Reichel
2023-07-14  1:37   ` Sebastian Reichel
2023-07-15 15:05 ` [PATCH v3 00/19] Sitronix ST7789V improvements Miquel Raynal
2023-07-15 15:05   ` Miquel Raynal
2023-07-31 22:03 ` Sebastian Reichel
2023-08-01  8:29   ` Neil Armstrong
2023-08-01  8:33 ` Neil Armstrong
2023-08-01  8:33   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230714013756.1546769-14-sre@kernel.org \
    --to=sre@kernel.org \
    --cc=airlied@gmail.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gerald.loacker@wolfvision.net \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.riesch@wolfvision.net \
    --cc=miquel.raynal@bootlin.com \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.