Re: [PATCH v3 00/19] Sitronix ST7789V improvements

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hi Sebastian,

+ Thomas

sre@kernel.org wrote on Fri, 14 Jul 2023 03:37:37 +0200:

> Hi,
> 
> This adds panel support for Inanbo T28CP45TN89, which I found inside of a
> handheld thermal camera. The panel is based on the st7789v controller. All
> information is based on reverse engineering. I also appended the series
> from Miquel Raynal adding EDT ET028013DMA panel support, so that I could
> easily test it with my SPI_NO_RX setup. They are slightly different due
> to rebasing.

Thanks a lot! I'll continue following the series and provide my help
when required.

Cheers,
Miquèl

> 
> Changes since PATCHv2:
>  * https://lore.kernel.org/all/20230422205012.2464933-1-sre@kernel.org/
>  * https://lore.kernel.org/all/20230616163255.2804163-1-miquel.raynal@bootlin.com/
>  * Add Rob Herring's R-b for the DT binding
>  * Make panel info "static const"
>  * Add Michael Riesch's R-b to all my patches
>  * Rebase to 6.5-rc1
>  * Append Miquel's series
> 
> Changes since PATCHv1:
>  * https://lore.kernel.org/all/20230317232355.1554980-1-sre@kernel.org/
>  * Apply DT binding changes requested by Krzysztof Kozlowski and his Ack
>  * I changed the driver patches to avoid code duplication and splitted
>    the code a bit more
> 
> Greetings,
> 
> -- Sebastian
> 
> Miquel Raynal (6):
>   dt-bindings: display: st7789v: Add the edt,et028013dma panel
>     compatible
>   dt-bindings: display: st7789v: bound the number of Rx data lines
>   drm/panel: sitronix-st7789v: Use 9 bits per spi word by default
>   drm/panel: sitronix-st7789v: Clarify a definition
>   drm/panel: sitronix-st7789v: Add EDT ET028013DMA panel support
>   drm/panel: sitronix-st7789v: Check display ID
> 
> Sebastian Reichel (13):
>   dt-bindings: vendor-prefixes: add Inanbo
>   dt-bindings: display: st7789v: add Inanbo T28CP45TN89
>   drm/panel: sitronix-st7789v: add SPI ID table
>   drm/panel: sitronix-st7789v: remove unused constants
>   drm/panel: sitronix-st7789v: make reset GPIO optional
>   drm/panel: sitronix-st7789v: simplify st7789v_spi_write
>   drm/panel: sitronix-st7789v: improve error handling
>   drm/panel: sitronix-st7789v: avoid hardcoding mode info
>   drm/panel: sitronix-st7789v: avoid hardcoding panel size
>   drm/panel: sitronix-st7789v: add media bus format
>   drm/panel: sitronix-st7789v: avoid hardcoding invert mode
>   drm/panel: sitronix-st7789v: avoid hardcoding polarity info
>   drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 support
> 
>  .../display/panel/sitronix,st7789v.yaml       |  10 +-
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  .../gpu/drm/panel/panel-sitronix-st7789v.c    | 262 +++++++++++++++---
>  3 files changed, 237 insertions(+), 37 deletions(-)
>