All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Adam Ford <aford173@gmail.com>
Cc: "Biju Das" <biju.das.jz@bp.renesas.com>,
	"Andrzej Hajda" <andrzej.hajda@intel.com>,
	"Neil Armstrong" <neil.armstrong@linaro.org>,
	"Robert Foss" <rfoss@kernel.org>,
	"David Airlie" <airlied@gmail.com>,
	"Daniel Vetter" <daniel@ffwll.ch>,
	"Jonas Karlman" <jonas@kwiboo.se>,
	"Jernej Skrabec" <jernej.skrabec@gmail.com>,
	"Abhinav Kumar" <quic_abhinavk@quicinc.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Andy Shevchenko" <andy.shevchenko@gmail.com>,
	"Javier Martinez Canillas" <javierm@redhat.com>,
	"Ahmad Fatoum" <a.fatoum@pengutronix.de>,
	"Rob Herring" <robh@kernel.org>,
	"Bogdan Togorean" <bogdan.togorean@analog.com>,
	dri-devel@lists.freedesktop.org,
	"Geert Uytterhoeven" <geert+renesas@glider.be>,
	linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH 7/7] drm: adv7511: Add hpd_override_enable feature bit to struct adv7511_chip_info
Date: Tue, 29 Aug 2023 10:36:56 +0300	[thread overview]
Message-ID: <20230829073656.GC2302@pendragon.ideasonboard.com> (raw)
In-Reply-To: <CAHCN7xKo4Gnt+3rBgNyHq5tAAWU+nUpfJjzgb4RSPrgOgRsuyw@mail.gmail.com>

On Fri, Aug 18, 2023 at 07:41:45AM -0500, Adam Ford wrote:
> On Sun, Aug 13, 2023 at 1:06 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
> >
> > As per spec, it is allowed to pulse the HPD signal to indicate that the
> > EDID information has changed. Some monitors do this when they wake up
> > from standby or are enabled. When the HPD goes low the adv7511 is
> > reset and the outputs are disabled which might cause the monitor to
> > go to standby again. To avoid this we ignore the HPD pin for the
> > first few seconds after enabling the output. On the other hand,
> > adv7535 require to enable HPD Override bit for proper HPD.
> >
> > Add hpd_override_enable feature bit to struct adv7511_chip_info to handle
> > this scenario.
> >
> > While at it, drop the enum adv7511_type as it is unused.
> 
> It seems like dropping adv7511_type is unrelated to the rest of the
> patch, and I think it should be split from this into its own patch

Dropping the enum with its last user makes sense, but I think the series
may go a bit too far by adding to the info structure bits that don't
really describe logical features, but are half made up for the sole
purpose of dropping the enum. I would prefer keeping the enum for the
handful of places where a type check makes more sense (in my opinion).

> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > ---
> >  drivers/gpu/drm/bridge/adv7511/adv7511.h     |  8 +-------
> >  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 +++++-------
> >  2 files changed, 6 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > index 627531f48f84..c523ac4c9bc8 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > @@ -325,22 +325,16 @@ struct adv7511_video_config {
> >         struct hdmi_avi_infoframe avi_infoframe;
> >  };
> >
> > -enum adv7511_type {
> > -       ADV7511,
> > -       ADV7533,
> > -       ADV7535,
> > -};
> > -
> >  #define ADV7511_MAX_ADDRS 3
> >
> >  struct adv7511_chip_info {
> > -       enum adv7511_type type;
> >         unsigned long max_mode_clock;
> >         unsigned long max_lane_freq;
> >         const char * const *supply_names;
> >         unsigned int num_supplies;
> >         unsigned has_dsi:1;
> >         unsigned link_config:1;
> > +       unsigned hpd_override_enable:1;
> >  };
> >
> >  struct adv7511 {
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > index 6974c267b1d5..7b06a0a21685 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > @@ -354,7 +354,7 @@ static void __adv7511_power_on(struct adv7511 *adv7511)
> >          * first few seconds after enabling the output. On the other hand
> >          * adv7535 require to enable HPD Override bit for proper HPD.
> >          */
> > -       if (adv7511->info->type == ADV7535)
> > +       if (adv7511->info->hpd_override_enable)
> >                 regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
> >                                    ADV7535_REG_POWER2_HPD_OVERRIDE,
> >                                    ADV7535_REG_POWER2_HPD_OVERRIDE);
> > @@ -381,7 +381,7 @@ static void adv7511_power_on(struct adv7511 *adv7511)
> >  static void __adv7511_power_off(struct adv7511 *adv7511)
> >  {
> >         /* TODO: setup additional power down modes */
> > -       if (adv7511->info->type == ADV7535)
> > +       if (adv7511->info->hpd_override_enable)
> >                 regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
> >                                    ADV7535_REG_POWER2_HPD_OVERRIDE, 0);
> >
> > @@ -682,7 +682,7 @@ adv7511_detect(struct adv7511 *adv7511, struct drm_connector *connector)
> >                         status = connector_status_disconnected;
> >         } else {
> >                 /* Renable HPD sensing */
> > -               if (adv7511->info->type == ADV7535)
> > +               if (adv7511->info->hpd_override_enable)
> >                         regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
> >                                            ADV7535_REG_POWER2_HPD_OVERRIDE,
> >                                            ADV7535_REG_POWER2_HPD_OVERRIDE);
> > @@ -1360,14 +1360,12 @@ static void adv7511_remove(struct i2c_client *i2c)
> >  }
> >
> >  static const struct adv7511_chip_info adv7511_chip_info = {
> > -       .type = ADV7511,
> >         .supply_names = adv7511_supply_names,
> >         .num_supplies = ARRAY_SIZE(adv7511_supply_names),
> >         .link_config = 1
> >  };
> >
> >  static const struct adv7511_chip_info adv7533_chip_info = {
> > -       .type = ADV7533,
> >         .max_mode_clock = 80000,
> >         .max_lane_freq = 800000,
> >         .supply_names = adv7533_supply_names,
> > @@ -1376,12 +1374,12 @@ static const struct adv7511_chip_info adv7533_chip_info = {
> >  };
> >
> >  static const struct adv7511_chip_info adv7535_chip_info = {
> > -       .type = ADV7535,
> >         .max_mode_clock = 148500,
> >         .max_lane_freq = 891000,
> >         .supply_names = adv7533_supply_names,
> >         .num_supplies = ARRAY_SIZE(adv7533_supply_names),
> > -       .has_dsi = 1
> > +       .has_dsi = 1,
> > +       .hpd_override_enable = 1
> >  };
> >
> >  static const struct i2c_device_id adv7511_i2c_ids[] = {

-- 
Regards,

Laurent Pinchart

WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Adam Ford <aford173@gmail.com>
Cc: "Neil Armstrong" <neil.armstrong@linaro.org>,
	"Robert Foss" <rfoss@kernel.org>,
	"Andrzej Hajda" <andrzej.hajda@intel.com>,
	"Geert Uytterhoeven" <geert+renesas@glider.be>,
	"Jonas Karlman" <jonas@kwiboo.se>,
	dri-devel@lists.freedesktop.org,
	"Abhinav Kumar" <quic_abhinavk@quicinc.com>,
	"Jernej Skrabec" <jernej.skrabec@gmail.com>,
	"Javier Martinez Canillas" <javierm@redhat.com>,
	linux-renesas-soc@vger.kernel.org,
	"Andy Shevchenko" <andy.shevchenko@gmail.com>,
	"Bogdan Togorean" <bogdan.togorean@analog.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Biju Das" <biju.das.jz@bp.renesas.com>,
	"Ahmad Fatoum" <a.fatoum@pengutronix.de>
Subject: Re: [PATCH 7/7] drm: adv7511: Add hpd_override_enable feature bit to struct adv7511_chip_info
Date: Tue, 29 Aug 2023 10:36:56 +0300	[thread overview]
Message-ID: <20230829073656.GC2302@pendragon.ideasonboard.com> (raw)
In-Reply-To: <CAHCN7xKo4Gnt+3rBgNyHq5tAAWU+nUpfJjzgb4RSPrgOgRsuyw@mail.gmail.com>

On Fri, Aug 18, 2023 at 07:41:45AM -0500, Adam Ford wrote:
> On Sun, Aug 13, 2023 at 1:06 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
> >
> > As per spec, it is allowed to pulse the HPD signal to indicate that the
> > EDID information has changed. Some monitors do this when they wake up
> > from standby or are enabled. When the HPD goes low the adv7511 is
> > reset and the outputs are disabled which might cause the monitor to
> > go to standby again. To avoid this we ignore the HPD pin for the
> > first few seconds after enabling the output. On the other hand,
> > adv7535 require to enable HPD Override bit for proper HPD.
> >
> > Add hpd_override_enable feature bit to struct adv7511_chip_info to handle
> > this scenario.
> >
> > While at it, drop the enum adv7511_type as it is unused.
> 
> It seems like dropping adv7511_type is unrelated to the rest of the
> patch, and I think it should be split from this into its own patch

Dropping the enum with its last user makes sense, but I think the series
may go a bit too far by adding to the info structure bits that don't
really describe logical features, but are half made up for the sole
purpose of dropping the enum. I would prefer keeping the enum for the
handful of places where a type check makes more sense (in my opinion).

> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > ---
> >  drivers/gpu/drm/bridge/adv7511/adv7511.h     |  8 +-------
> >  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 +++++-------
> >  2 files changed, 6 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > index 627531f48f84..c523ac4c9bc8 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > @@ -325,22 +325,16 @@ struct adv7511_video_config {
> >         struct hdmi_avi_infoframe avi_infoframe;
> >  };
> >
> > -enum adv7511_type {
> > -       ADV7511,
> > -       ADV7533,
> > -       ADV7535,
> > -};
> > -
> >  #define ADV7511_MAX_ADDRS 3
> >
> >  struct adv7511_chip_info {
> > -       enum adv7511_type type;
> >         unsigned long max_mode_clock;
> >         unsigned long max_lane_freq;
> >         const char * const *supply_names;
> >         unsigned int num_supplies;
> >         unsigned has_dsi:1;
> >         unsigned link_config:1;
> > +       unsigned hpd_override_enable:1;
> >  };
> >
> >  struct adv7511 {
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > index 6974c267b1d5..7b06a0a21685 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > @@ -354,7 +354,7 @@ static void __adv7511_power_on(struct adv7511 *adv7511)
> >          * first few seconds after enabling the output. On the other hand
> >          * adv7535 require to enable HPD Override bit for proper HPD.
> >          */
> > -       if (adv7511->info->type == ADV7535)
> > +       if (adv7511->info->hpd_override_enable)
> >                 regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
> >                                    ADV7535_REG_POWER2_HPD_OVERRIDE,
> >                                    ADV7535_REG_POWER2_HPD_OVERRIDE);
> > @@ -381,7 +381,7 @@ static void adv7511_power_on(struct adv7511 *adv7511)
> >  static void __adv7511_power_off(struct adv7511 *adv7511)
> >  {
> >         /* TODO: setup additional power down modes */
> > -       if (adv7511->info->type == ADV7535)
> > +       if (adv7511->info->hpd_override_enable)
> >                 regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
> >                                    ADV7535_REG_POWER2_HPD_OVERRIDE, 0);
> >
> > @@ -682,7 +682,7 @@ adv7511_detect(struct adv7511 *adv7511, struct drm_connector *connector)
> >                         status = connector_status_disconnected;
> >         } else {
> >                 /* Renable HPD sensing */
> > -               if (adv7511->info->type == ADV7535)
> > +               if (adv7511->info->hpd_override_enable)
> >                         regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
> >                                            ADV7535_REG_POWER2_HPD_OVERRIDE,
> >                                            ADV7535_REG_POWER2_HPD_OVERRIDE);
> > @@ -1360,14 +1360,12 @@ static void adv7511_remove(struct i2c_client *i2c)
> >  }
> >
> >  static const struct adv7511_chip_info adv7511_chip_info = {
> > -       .type = ADV7511,
> >         .supply_names = adv7511_supply_names,
> >         .num_supplies = ARRAY_SIZE(adv7511_supply_names),
> >         .link_config = 1
> >  };
> >
> >  static const struct adv7511_chip_info adv7533_chip_info = {
> > -       .type = ADV7533,
> >         .max_mode_clock = 80000,
> >         .max_lane_freq = 800000,
> >         .supply_names = adv7533_supply_names,
> > @@ -1376,12 +1374,12 @@ static const struct adv7511_chip_info adv7533_chip_info = {
> >  };
> >
> >  static const struct adv7511_chip_info adv7535_chip_info = {
> > -       .type = ADV7535,
> >         .max_mode_clock = 148500,
> >         .max_lane_freq = 891000,
> >         .supply_names = adv7533_supply_names,
> >         .num_supplies = ARRAY_SIZE(adv7533_supply_names),
> > -       .has_dsi = 1
> > +       .has_dsi = 1,
> > +       .hpd_override_enable = 1
> >  };
> >
> >  static const struct i2c_device_id adv7511_i2c_ids[] = {

-- 
Regards,

Laurent Pinchart

  parent reply	other threads:[~2023-08-29  7:37 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-13 18:05 [PATCH 0/7] ADV7511 driver enhancements Biju Das
2023-08-13 18:05 ` Biju Das
2023-08-13 18:05 ` [PATCH 1/7] drm: adv7511: Add struct adv7511_chip_info and use i2c_get_match_data() Biju Das
2023-08-13 18:05   ` Biju Das
2023-08-18 14:49   ` Adam Ford
2023-08-18 14:49     ` Adam Ford
2023-08-29  7:22   ` Laurent Pinchart
2023-08-29  7:22     ` Laurent Pinchart
2023-08-29 14:00     ` Biju Das
2023-08-29 14:00       ` Biju Das
2023-08-13 18:05 ` [PATCH 2/7] drm: adv7511: Add max_mode_clock variable to struct adv7511_chip_info Biju Das
2023-08-13 18:05   ` Biju Das
2023-08-28 22:36   ` Adam Ford
2023-08-28 22:36     ` Adam Ford
2023-08-29  7:23   ` Laurent Pinchart
2023-08-29  7:23     ` Laurent Pinchart
2023-08-29 14:01     ` Biju Das
2023-08-29 14:01       ` Biju Das
2023-08-13 18:05 ` [PATCH 3/7] drm: adv7511: Add max_lane_freq " Biju Das
2023-08-13 18:05   ` Biju Das
2023-08-29  7:25   ` Laurent Pinchart
2023-08-29  7:25     ` Laurent Pinchart
2023-08-29 14:05     ` Biju Das
2023-08-29 14:05       ` Biju Das
2023-08-13 18:05 ` [PATCH 4/7] drm: adv7511: Add supply_names and num_supplies variables " Biju Das
2023-08-13 18:05   ` Biju Das
2023-08-29  7:26   ` Laurent Pinchart
2023-08-29  7:26     ` Laurent Pinchart
2023-08-29 14:06     ` Biju Das
2023-08-29 14:06       ` Biju Das
2023-08-13 18:05 ` [PATCH 5/7] drm: adv7511: Add has_dsi feature bit " Biju Das
2023-08-13 18:05   ` Biju Das
2023-08-29  7:30   ` Laurent Pinchart
2023-08-29  7:30     ` Laurent Pinchart
2023-08-29 14:19     ` Biju Das
2023-08-29 14:19       ` Biju Das
2023-08-29 15:35       ` Laurent Pinchart
2023-08-29 15:35         ` Laurent Pinchart
2023-08-29 15:42         ` Biju Das
2023-08-29 15:42           ` Biju Das
2023-08-30  8:22           ` Laurent Pinchart
2023-08-30  8:22             ` Laurent Pinchart
2023-08-13 18:05 ` [PATCH 6/7] drm: adv7511: Add link_config " Biju Das
2023-08-13 18:05   ` Biju Das
2023-08-29  7:34   ` Laurent Pinchart
2023-08-29  7:34     ` Laurent Pinchart
2023-08-29 14:20     ` Biju Das
2023-08-29 14:20       ` Biju Das
2023-08-13 18:05 ` [PATCH 7/7] drm: adv7511: Add hpd_override_enable " Biju Das
2023-08-13 18:05   ` Biju Das
2023-08-18 12:41   ` Adam Ford
2023-08-18 12:41     ` Adam Ford
2023-08-18 13:34     ` Biju Das
2023-08-18 13:34       ` Biju Das
2023-08-18 13:37       ` Adam Ford
2023-08-18 13:37         ` Adam Ford
2023-08-18 13:44         ` Biju Das
2023-08-18 13:44           ` Biju Das
2023-08-29  7:36     ` Laurent Pinchart [this message]
2023-08-29  7:36       ` Laurent Pinchart
2023-08-29 14:22       ` Biju Das
2023-08-29 14:22         ` Biju Das
2023-08-18 13:56 ` [PATCH 0/7] ADV7511 driver enhancements Fabio Estevam
2023-08-18 13:56   ` Fabio Estevam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230829073656.GC2302@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=aford173@gmail.com \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=bogdan.togorean@analog.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert+renesas@glider.be \
    --cc=javierm@redhat.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=rfoss@kernel.org \
    --cc=robh@kernel.org \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.