* [Accel-config] [PATCH v1 1/2] accel-config/test: Add parameter for specifying dev and wq
@ 2023-10-25 8:52 Rex Zhang
2023-10-25 8:52 ` [Accel-config] [PATCH v1 2/2] accel-config/test: Fix bug about checking result of decompression Rex Zhang
0 siblings, 1 reply; 2+ messages in thread
From: Rex Zhang @ 2023-10-25 8:52 UTC (permalink / raw)
To: fenghua.yu, ramesh.thomas, rex.zhang, tony.zhu, accel-config
About the script iaa_user_test_runner.sh, previously, the only one behavior
is to enable dev and wq firstly than invoke iaa_test, then the iaa_test
will find which dev and wq are enabled automatically.
For enabling the dev and wq outside the script, the script indentify the
enabled dev and wq, then pass the dev and wq into iaa_test as a parameter.
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
---
test/iaa_user_test_runner.sh | 149 +++++++++++++++++++----------------
1 file changed, 83 insertions(+), 66 deletions(-)
diff --git a/test/iaa_user_test_runner.sh b/test/iaa_user_test_runner.sh
index e3a6663..d85d043 100755
--- a/test/iaa_user_test_runner.sh
+++ b/test/iaa_user_test_runner.sh
@@ -6,7 +6,18 @@
rc="$EXIT_SKIP"
-IAA=iax1
+DEV_OPT=""
+input1=$1
+if [ "$input1" == "--skip-config" ]; then
+ DEV=`ls /dev/iax/ | sed -ne 's|wq\([^.]\+\)\(.*\)|iax\1/wq\1\2|p'`
+ DEV=`echo $DEV | cut -f1 -d' '`
+ IAA=`echo $DEV | cut -f1 -d/`
+ DEV_OPT="-d $DEV"
+ echo "$DEV"
+else
+ IAA=iax1
+fi
+echo "$IAA"
WQ0=wq1.4
WQ1=wq1.1
DBDF=`ls -l /sys/bus/dsa/devices/iax3 | awk -F '/' '{print $(NF - 1)}'`
@@ -149,10 +160,10 @@ test_op()
if [ "$extra_flag" != "" ]
then
"$IAATEST" -w "$wq_mode_code" -l "$xfer_size" -o "$opcode" \
- -f "$flag" -1 "$extra_flag" -t 5000 -v
+ -f "$flag" -1 "$extra_flag" -t 5000 -v $DEV_OPT
else
"$IAATEST" -w "$wq_mode_code" -l "$xfer_size" -o "$opcode" \
- -f "$flag" -t 5000 -v
+ -f "$flag" -t 5000 -v $DEV_OPT
fi
done
done
@@ -169,133 +180,133 @@ test_op_filter()
if [ $((IAA_OPCODE_MASK_SCAN & OP_CAP2)) -ne 0 ]; then
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x7c \
- -3 128 -o $IAA_OPCODE_SCAN -t 5000 -v
+ -3 128 -o $IAA_OPCODE_SCAN -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x7c \
- -3 256 -o $IAA_OPCODE_SCAN -t 5000 -v
+ -3 256 -o $IAA_OPCODE_SCAN -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x7c \
- -3 1024 -o $IAA_OPCODE_SCAN -t 5000 -v
+ -3 1024 -o $IAA_OPCODE_SCAN -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x7c \
- -3 16384 -o $IAA_OPCODE_SCAN -t 5000 -v
+ -3 16384 -o $IAA_OPCODE_SCAN -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1048576 -2 0x7c \
- -3 262144 -o $IAA_OPCODE_SCAN -t 5000 -v
+ -3 262144 -o $IAA_OPCODE_SCAN -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2097152 -2 0x7c \
- -3 524288 -o $IAA_OPCODE_SCAN -t 5000 -v
+ -3 524288 -o $IAA_OPCODE_SCAN -t 5000 -v $DEV_OPT
fi
if [ $((IAA_OPCODE_MASK_SET_MEMBERSHIP & OP_CAP2)) -ne 0 ]; then
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x38 \
- -3 256 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v
+ -3 256 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x38 \
- -3 512 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v
+ -3 512 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x38 \
- -3 2048 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v
+ -3 2048 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x38 \
- -3 32768 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v
+ -3 32768 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1048576 -2 0x38 \
- -3 524288 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v
+ -3 524288 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2097152 -2 0x38 \
- -3 1048576 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v
+ -3 1048576 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v $DEV_OPT
fi
if [ $((IAA_OPCODE_MASK_EXTRACT & OP_CAP2)) -ne 0 ]; then
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x7c \
- -3 128 -o $IAA_OPCODE_EXTRACT -t 5000 -v
+ -3 128 -o $IAA_OPCODE_EXTRACT -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x7c \
- -3 256 -o $IAA_OPCODE_EXTRACT -t 5000 -v
+ -3 256 -o $IAA_OPCODE_EXTRACT -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x7c \
- -3 1024 -o $IAA_OPCODE_EXTRACT -t 5000 -v
+ -3 1024 -o $IAA_OPCODE_EXTRACT -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x7c \
- -3 16384 -o $IAA_OPCODE_EXTRACT -t 5000 -v
+ -3 16384 -o $IAA_OPCODE_EXTRACT -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1048576 -2 0x7c \
- -3 262144 -o $IAA_OPCODE_EXTRACT -t 5000 -v
+ -3 262144 -o $IAA_OPCODE_EXTRACT -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2097152 -2 0x7c \
- -3 524288 -o $IAA_OPCODE_EXTRACT -t 5000 -v
+ -3 524288 -o $IAA_OPCODE_EXTRACT -t 5000 -v $DEV_OPT
fi
if [ $((IAA_OPCODE_MASK_SELECT & OP_CAP2)) -ne 0 ]; then
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x7c \
- -3 128 -o $IAA_OPCODE_SELECT -t 5000 -v
+ -3 128 -o $IAA_OPCODE_SELECT -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x7c \
- -3 256 -o $IAA_OPCODE_SELECT -t 5000 -v
+ -3 256 -o $IAA_OPCODE_SELECT -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x7c \
- -3 1024 -o $IAA_OPCODE_SELECT -t 5000 -v
+ -3 1024 -o $IAA_OPCODE_SELECT -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x7c \
- -3 16384 -o $IAA_OPCODE_SELECT -t 5000 -v
+ -3 16384 -o $IAA_OPCODE_SELECT -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1048576 -2 0x7c \
- -3 262144 -o $IAA_OPCODE_SELECT -t 5000 -v
+ -3 262144 -o $IAA_OPCODE_SELECT -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2097152 -2 0x7c \
- -3 524288 -o $IAA_OPCODE_SELECT -t 5000 -v
+ -3 524288 -o $IAA_OPCODE_SELECT -t 5000 -v $DEV_OPT
fi
if [ $((IAA_OPCODE_MASK_RLE_BURST & OP_CAP2)) -ne 0 ]; then
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x1c \
- -3 512 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 512 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x1c \
- -3 1024 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 1024 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x1c \
- -3 4096 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 4096 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 32768 -2 0x1c \
- -3 32768 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 32768 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x1c \
- -3 65536 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 65536 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 131072 -2 0x1c \
- -3 131072 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 131072 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 32 -2 0x3c \
- -3 16 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 16 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 64 -2 0x3c \
- -3 32 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 32 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 128 -2 0x3c \
- -3 64 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 64 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 256 -2 0x3c \
- -3 128 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 128 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x3c \
- -3 256 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 256 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x3c \
- -3 512 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 512 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 64 -2 0x7c \
- -3 16 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 16 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 128 -2 0x7c \
- -3 32 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 32 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 256 -2 0x7c \
- -3 64 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 64 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x7c \
- -3 128 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 128 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x7c \
- -3 256 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 256 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2048 -2 0x7c \
- -3 512 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+ -3 512 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
fi
if [ $((IAA_OPCODE_MASK_FIND_UNIQUE & OP_CAP2)) -ne 0 ]; then
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x38 \
- -3 256 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v
+ -3 256 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x38 \
- -3 512 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v
+ -3 512 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x38 \
- -3 2048 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v
+ -3 2048 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x38 \
- -3 32768 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v
+ -3 32768 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1048576 -2 0x38 \
- -3 524288 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v
+ -3 524288 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2097152 -2 0x38 \
- -3 1048576 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v
+ -3 1048576 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v $DEV_OPT
fi
if [ $((IAA_OPCODE_MASK_EXPAND & OP_CAP2)) -ne 0 ]; then
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x7c \
- -3 128 -o $IAA_OPCODE_EXPAND -t 5000 -v
+ -3 128 -o $IAA_OPCODE_EXPAND -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x7c \
- -3 256 -o $IAA_OPCODE_EXPAND -t 5000 -v
+ -3 256 -o $IAA_OPCODE_EXPAND -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x7c \
- -3 1024 -o $IAA_OPCODE_EXPAND -t 5000 -v
+ -3 1024 -o $IAA_OPCODE_EXPAND -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x7c \
- -3 16384 -o $IAA_OPCODE_EXPAND -t 5000 -v
+ -3 16384 -o $IAA_OPCODE_EXPAND -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1048576 -2 0x7c \
- -3 262144 -o $IAA_OPCODE_EXPAND -t 5000 -v
+ -3 262144 -o $IAA_OPCODE_EXPAND -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2097152 -2 0x7c \
- -3 524288 -o $IAA_OPCODE_EXPAND -t 5000 -v
+ -3 524288 -o $IAA_OPCODE_EXPAND -t 5000 -v $DEV_OPT
fi
done
}
@@ -317,7 +328,7 @@ test_op_crypto()
echo "Testing $xfer_size bytes"
"$IAATEST" -w "$wq_mode_code" -l "$xfer_size" -o "$opcode" \
- -f "$flag" -a "$aecs_flag" -t 5000 -v
+ -f "$flag" -a "$aecs_flag" -t 5000 -v $DEV_OPT
done
done
}
@@ -338,16 +349,19 @@ test_op_transl_fetch()
echo "Testing $xfer_size bytes"
"$IAATEST" -w "$wq_mode_code" -l "$xfer_size" -o "$opcode" \
- -f "$flag" -m 0 -t 5000 -v
+ -f "$flag" -m 0 -t 5000 -v $DEV_OPT
"$IAATEST" -w "$wq_mode_code" -l "$xfer_size" -o "$opcode" \
- -f "$flag" -m 1 -t 5000 -v
+ -f "$flag" -m 1 -t 5000 -v $DEV_OPT
done
done
}
-_cleanup
-start_iaa
-enable_wqs
+if [ "$input1" != "--skip-config" ]; then
+ _cleanup
+ start_iaa
+ enable_wqs
+fi
+
# shellcheck disable=SC2034
rc="$EXIT_FAILURE"
@@ -499,7 +513,10 @@ if [ $((IAA_OPCODE_MASK_TRANSL_FETCH & OP_CAP0)) -ne 0 ]; then
unbind_vfio
fi
-disable_wqs
-stop_iaa
-_cleanup
+if [ "$input1" != "--skip-config" ]; then
+ disable_wqs
+ stop_iaa
+ _cleanup
+fi
+
exit 0
--
2.39.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [Accel-config] [PATCH v1 2/2] accel-config/test: Fix bug about checking result of decompression
2023-10-25 8:52 [Accel-config] [PATCH v1 1/2] accel-config/test: Add parameter for specifying dev and wq Rex Zhang
@ 2023-10-25 8:52 ` Rex Zhang
0 siblings, 0 replies; 2+ messages in thread
From: Rex Zhang @ 2023-10-25 8:52 UTC (permalink / raw)
To: fenghua.yu, ramesh.thomas, rex.zhang, tony.zhu, accel-config
Previous code missed verifying the result of decompression, add the
verification as a complement.
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
---
test/iaa.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/test/iaa.c b/test/iaa.c
index 42cf6fb..44eea97 100644
--- a/test/iaa.c
+++ b/test/iaa.c
@@ -2000,7 +2000,7 @@ int iaa_decrypto_multi_task_nodes(struct acctest_context *ctx)
/* mismatch_expected: expect mismatched buffer with success status 0x1 */
int iaa_task_result_verify(struct task *tsk, int mismatch_expected)
{
- int ret = ACCTEST_STATUS_OK;
+ int ret = ACCTEST_STATUS_FAIL;
info("verifying task result for %#lx\n", tsk);
@@ -2008,6 +2008,9 @@ int iaa_task_result_verify(struct task *tsk, int mismatch_expected)
return tsk->comp->status;
switch (tsk->opcode) {
+ case IAX_OPCODE_NOOP:
+ ret = ACCTEST_STATUS_OK;
+ break;
case IAX_OPCODE_CRC64:
ret = task_result_verify_crc64(tsk, mismatch_expected);
break;
@@ -2032,6 +2035,9 @@ int iaa_task_result_verify(struct task *tsk, int mismatch_expected)
case IAX_OPCODE_COMPRESS:
ret = task_result_verify_compress(tsk, mismatch_expected);
break;
+ case IAX_OPCODE_DECOMPRESS:
+ ret = task_result_verify_decompress(tsk, mismatch_expected);
+ break;
case IAX_OPCODE_SCAN:
ret = task_result_verify_scan(tsk, mismatch_expected);
break;
--
2.39.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-10-25 8:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-10-25 8:52 [Accel-config] [PATCH v1 1/2] accel-config/test: Add parameter for specifying dev and wq Rex Zhang
2023-10-25 8:52 ` [Accel-config] [PATCH v1 2/2] accel-config/test: Fix bug about checking result of decompression Rex Zhang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.