From: "João Rodrigues" <jrodrigues@ubimet.com>
Cc: "João Rodrigues" <jrodrigues@ubimet.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1] ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)
Date: Thu, 2 Nov 2023 23:11:30 +0100 [thread overview]
Message-ID: <20231102231130.13ca0513@pcn112> (raw)
From: João Rodrigues <jrodrigues@ubimet.com>
TQMa7x (revision 01xxx) uses a LM75A temperature sensor.
The two sensors use different I2C addresses, so we can set both sensors
simultaneously.
Signed-off-by: João Rodrigues <jrodrigues@ubimet.com>
---
arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index fe42b0a4683..3fc3130f9de 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -128,11 +128,16 @@ vgen6_reg: vldo4 {
};
};
- /* NXP SE97BTP with temperature sensor + eeprom */
+ /* LM75A temperature sensor, TQMa7x 01xx */
+ lm75a: temperature-sensor@48 {
+ compatible = "national,lm75a";
+ reg = <0x48>;
+ };
+
+ /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
se97b: temperature-sensor-eeprom@1e {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x1e>;
- status = "okay";
};
/* ST M24C64 */
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: "João Rodrigues" <jrodrigues@ubimet.com>
Cc: "João Rodrigues" <jrodrigues@ubimet.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1] ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)
Date: Thu, 2 Nov 2023 23:11:30 +0100 [thread overview]
Message-ID: <20231102231130.13ca0513@pcn112> (raw)
From: João Rodrigues <jrodrigues@ubimet.com>
TQMa7x (revision 01xxx) uses a LM75A temperature sensor.
The two sensors use different I2C addresses, so we can set both sensors
simultaneously.
Signed-off-by: João Rodrigues <jrodrigues@ubimet.com>
---
arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index fe42b0a4683..3fc3130f9de 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -128,11 +128,16 @@ vgen6_reg: vldo4 {
};
};
- /* NXP SE97BTP with temperature sensor + eeprom */
+ /* LM75A temperature sensor, TQMa7x 01xx */
+ lm75a: temperature-sensor@48 {
+ compatible = "national,lm75a";
+ reg = <0x48>;
+ };
+
+ /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
se97b: temperature-sensor-eeprom@1e {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x1e>;
- status = "okay";
};
/* ST M24C64 */
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: "João Rodrigues" <jrodrigues@ubimet.com>
To: unlisted-recipients:; (no To-header on input)
Cc: "João Rodrigues" <jrodrigues@ubimet.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1] ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)
Date: Thu, 2 Nov 2023 23:11:30 +0100 [thread overview]
Message-ID: <20231102231130.13ca0513@pcn112> (raw)
From: João Rodrigues <jrodrigues@ubimet.com>
TQMa7x (revision 01xxx) uses a LM75A temperature sensor.
The two sensors use different I2C addresses, so we can set both sensors
simultaneously.
Signed-off-by: João Rodrigues <jrodrigues@ubimet.com>
---
arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index fe42b0a4683..3fc3130f9de 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -128,11 +128,16 @@ vgen6_reg: vldo4 {
};
};
- /* NXP SE97BTP with temperature sensor + eeprom */
+ /* LM75A temperature sensor, TQMa7x 01xx */
+ lm75a: temperature-sensor@48 {
+ compatible = "national,lm75a";
+ reg = <0x48>;
+ };
+
+ /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
se97b: temperature-sensor-eeprom@1e {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x1e>;
- status = "okay";
};
/* ST M24C64 */
--
2.25.1
next reply other threads:[~2023-11-02 22:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-02 22:11 João Rodrigues [this message]
2023-11-02 22:11 ` [PATCH v1] ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx) João Rodrigues
2023-11-02 22:11 ` João Rodrigues
2023-11-03 21:07 ` Fabio Estevam
2023-11-03 21:07 ` Fabio Estevam
2023-11-07 6:34 ` Alexander Stein
2023-11-07 6:34 ` Alexander Stein
2023-11-09 6:57 ` Alexander Stein
2023-11-09 6:57 ` Alexander Stein
2023-11-09 9:26 ` jrodrigues
2023-11-09 9:26 ` jrodrigues
2023-11-08 22:51 ` Bruno Thomsen
2023-11-08 22:51 ` Bruno Thomsen
2023-11-09 8:49 ` jrodrigues
2023-11-09 8:49 ` jrodrigues
2023-12-05 12:14 ` Shawn Guo
2023-12-05 12:14 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231102231130.13ca0513@pcn112 \
--to=jrodrigues@ubimet.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.