All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: bhelgaas@google.com, imx@lists.linux.dev, kw@linux.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org, lpieralisi@kernel.org,
	minghuan.Lian@nxp.com, mingkai.hu@nxp.com, robh@kernel.org,
	roy.zang@nxp.com
Subject: Re: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a
Date: Mon, 4 Dec 2023 16:29:31 +0530	[thread overview]
Message-ID: <20231204105931.GB35383@thinkpad> (raw)
In-Reply-To: <20231201161712.1645987-3-Frank.Li@nxp.com>

On Fri, Dec 01, 2023 at 11:17:10AM -0500, Frank Li wrote:
> Add suspend/resume support for Layerscape LS1021a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to
> check if the controller has received the PME_To_Ack from the endpoint or
> not. So to be on the safer side, the driver just waits for
> PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
> bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
> state depending on the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a
> software reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

One comment below. With that addressed,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---
> 
> Notes:
>     Change from v4 to v5
>     - update comit message
>     - remove a empty line
>     - use comments
>     /* Reset the PEX wrapper to bring the link out of L2 */
>     - pci->pp.ops = pcie->drvdata->ops,
>     ls_pcie_host_ops to the "ops" member of layerscape_drvdata.
>     - don't set pcie->scfg = NULL at error path
>     
>     Change from v3 to v4
>     - update commit message.
>     - it is reset a glue logic part for PCI controller.
>     - use regmap_write_bits() to reduce code change.
>     
>     Change from v2 to v3
>     - update according to mani's feedback
>     change from v1 to v2
>     - change subject 'a' to 'A'
> 
>  drivers/pci/controller/dwc/pci-layerscape.c | 81 ++++++++++++++++++++-
>  1 file changed, 80 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index aea89926bcc4f..8bdaae9be7d56 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -35,11 +35,19 @@
>  #define PF_MCR_PTOMR		BIT(0)
>  #define PF_MCR_EXL2S		BIT(1)
>  
> +/* LS1021A PEXn PM Write Control Register */
> +#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
> +#define PMXMTTURNOFF		BIT(31)
> +#define SCFG_PEXSFTRSTCR	0x190
> +#define PEXSR(idx)		BIT(idx)
> +
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
>  	const u32 pf_off;
> +	const struct dw_pcie_host_ops *ops;
>  	int (*exit_from_l2)(struct dw_pcie_rp *pp);
> +	bool scfg_support;
>  	bool pm_support;
>  };
>  
> @@ -47,6 +55,8 @@ struct ls_pcie {
>  	struct dw_pcie *pci;
>  	const struct ls_pcie_drvdata *drvdata;
>  	void __iomem *pf_base;
> +	struct regmap *scfg;
> +	int index;
>  	bool big_endian;
>  };
>  
> @@ -171,18 +181,70 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
>  	return 0;
>  }
>  
> +static void scfg_pcie_send_turnoff_msg(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Send PME_Turn_Off message */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +
> +	/*
> +	 * There is no specific register to check for PME_To_Ack from endpoint.
> +	 * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
> +	 */
> +	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> +
> +	/*
> +	 * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
> +	 * to complete the PME_Turn_Off handshake.
> +	 */
> +	regmap_write_bits(scfg, reg, mask, 0);
> +}
> +
> +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), PMXMTTURNOFF);
> +}
> +
> +static int scfg_pcie_exit_from_l2(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Reset the PEX wrapper to bring the link out of L2 */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +	regmap_write_bits(scfg, reg, mask, 0);
> +
> +	return 0;
> +}
> +
> +static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
> +}
> +
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>  	.host_init = ls_pcie_host_init,
>  	.pme_turn_off = ls_pcie_send_turnoff_msg,
>  };
>  
> +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> +	.host_init = ls_pcie_host_init,
> +	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> +};
> +
>  static const struct ls_pcie_drvdata ls1021a_drvdata = {
> -	.pm_support = false,
> +	.pm_support = true,
> +	.scfg_support = true,
> +	.ops = &ls1021a_pcie_host_ops,
> +	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
>  };
>  
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
>  	.pf_off = 0xc0000,
>  	.pm_support = true,
> +	.ops = &ls_pcie_host_ops;
>  	.exit_from_l2 = ls_pcie_exit_from_l2,
>  };
>  
> @@ -205,6 +267,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	struct dw_pcie *pci;
>  	struct ls_pcie *pcie;
>  	struct resource *dbi_base;
> +	u32 index[2];
> +	int ret;
>  
>  	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>  	if (!pcie)
> @@ -220,6 +284,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	pci->pp.ops = &ls_pcie_host_ops;

This should be removed now.

- Mani

>  
>  	pcie->pci = pci;
> +	pci->pp.ops = pcie->drvdata->ops;
>  
>  	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
>  	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> @@ -230,6 +295,20 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  
>  	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
>  
> +	if (pcie->drvdata->scfg_support) {
> +		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> +		if (IS_ERR(pcie->scfg)) {
> +			dev_err(dev, "No syscfg phandle specified\n");
> +			return PTR_ERR(pcie->scfg);
> +		}
> +
> +		ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
> +		if (ret)
> +			return ret;
> +
> +		pcie->index = index[1];
> +	}
> +
>  	if (!ls_pcie_is_bridge(pcie))
>  		return -ENODEV;
>  
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

WARNING: multiple messages have this Message-ID (diff)
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: imx@lists.linux.dev, kw@linux.com, linux-pci@vger.kernel.org,
	lpieralisi@kernel.org, linux-kernel@vger.kernel.org,
	minghuan.Lian@nxp.com, mingkai.hu@nxp.com, roy.zang@nxp.com,
	bhelgaas@google.com, linuxppc-dev@lists.ozlabs.org,
	robh@kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a
Date: Mon, 4 Dec 2023 16:29:31 +0530	[thread overview]
Message-ID: <20231204105931.GB35383@thinkpad> (raw)
In-Reply-To: <20231201161712.1645987-3-Frank.Li@nxp.com>

On Fri, Dec 01, 2023 at 11:17:10AM -0500, Frank Li wrote:
> Add suspend/resume support for Layerscape LS1021a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to
> check if the controller has received the PME_To_Ack from the endpoint or
> not. So to be on the safer side, the driver just waits for
> PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
> bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
> state depending on the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a
> software reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

One comment below. With that addressed,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---
> 
> Notes:
>     Change from v4 to v5
>     - update comit message
>     - remove a empty line
>     - use comments
>     /* Reset the PEX wrapper to bring the link out of L2 */
>     - pci->pp.ops = pcie->drvdata->ops,
>     ls_pcie_host_ops to the "ops" member of layerscape_drvdata.
>     - don't set pcie->scfg = NULL at error path
>     
>     Change from v3 to v4
>     - update commit message.
>     - it is reset a glue logic part for PCI controller.
>     - use regmap_write_bits() to reduce code change.
>     
>     Change from v2 to v3
>     - update according to mani's feedback
>     change from v1 to v2
>     - change subject 'a' to 'A'
> 
>  drivers/pci/controller/dwc/pci-layerscape.c | 81 ++++++++++++++++++++-
>  1 file changed, 80 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index aea89926bcc4f..8bdaae9be7d56 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -35,11 +35,19 @@
>  #define PF_MCR_PTOMR		BIT(0)
>  #define PF_MCR_EXL2S		BIT(1)
>  
> +/* LS1021A PEXn PM Write Control Register */
> +#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
> +#define PMXMTTURNOFF		BIT(31)
> +#define SCFG_PEXSFTRSTCR	0x190
> +#define PEXSR(idx)		BIT(idx)
> +
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
>  	const u32 pf_off;
> +	const struct dw_pcie_host_ops *ops;
>  	int (*exit_from_l2)(struct dw_pcie_rp *pp);
> +	bool scfg_support;
>  	bool pm_support;
>  };
>  
> @@ -47,6 +55,8 @@ struct ls_pcie {
>  	struct dw_pcie *pci;
>  	const struct ls_pcie_drvdata *drvdata;
>  	void __iomem *pf_base;
> +	struct regmap *scfg;
> +	int index;
>  	bool big_endian;
>  };
>  
> @@ -171,18 +181,70 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
>  	return 0;
>  }
>  
> +static void scfg_pcie_send_turnoff_msg(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Send PME_Turn_Off message */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +
> +	/*
> +	 * There is no specific register to check for PME_To_Ack from endpoint.
> +	 * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
> +	 */
> +	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> +
> +	/*
> +	 * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
> +	 * to complete the PME_Turn_Off handshake.
> +	 */
> +	regmap_write_bits(scfg, reg, mask, 0);
> +}
> +
> +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), PMXMTTURNOFF);
> +}
> +
> +static int scfg_pcie_exit_from_l2(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Reset the PEX wrapper to bring the link out of L2 */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +	regmap_write_bits(scfg, reg, mask, 0);
> +
> +	return 0;
> +}
> +
> +static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
> +}
> +
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>  	.host_init = ls_pcie_host_init,
>  	.pme_turn_off = ls_pcie_send_turnoff_msg,
>  };
>  
> +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> +	.host_init = ls_pcie_host_init,
> +	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> +};
> +
>  static const struct ls_pcie_drvdata ls1021a_drvdata = {
> -	.pm_support = false,
> +	.pm_support = true,
> +	.scfg_support = true,
> +	.ops = &ls1021a_pcie_host_ops,
> +	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
>  };
>  
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
>  	.pf_off = 0xc0000,
>  	.pm_support = true,
> +	.ops = &ls_pcie_host_ops;
>  	.exit_from_l2 = ls_pcie_exit_from_l2,
>  };
>  
> @@ -205,6 +267,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	struct dw_pcie *pci;
>  	struct ls_pcie *pcie;
>  	struct resource *dbi_base;
> +	u32 index[2];
> +	int ret;
>  
>  	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>  	if (!pcie)
> @@ -220,6 +284,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	pci->pp.ops = &ls_pcie_host_ops;

This should be removed now.

- Mani

>  
>  	pcie->pci = pci;
> +	pci->pp.ops = pcie->drvdata->ops;
>  
>  	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
>  	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> @@ -230,6 +295,20 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  
>  	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
>  
> +	if (pcie->drvdata->scfg_support) {
> +		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> +		if (IS_ERR(pcie->scfg)) {
> +			dev_err(dev, "No syscfg phandle specified\n");
> +			return PTR_ERR(pcie->scfg);
> +		}
> +
> +		ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
> +		if (ret)
> +			return ret;
> +
> +		pcie->index = index[1];
> +	}
> +
>  	if (!ls_pcie_is_bridge(pcie))
>  		return -ENODEV;
>  
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

WARNING: multiple messages have this Message-ID (diff)
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: bhelgaas@google.com, imx@lists.linux.dev, kw@linux.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org, lpieralisi@kernel.org,
	minghuan.Lian@nxp.com, mingkai.hu@nxp.com, robh@kernel.org,
	roy.zang@nxp.com
Subject: Re: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a
Date: Mon, 4 Dec 2023 16:29:31 +0530	[thread overview]
Message-ID: <20231204105931.GB35383@thinkpad> (raw)
In-Reply-To: <20231201161712.1645987-3-Frank.Li@nxp.com>

On Fri, Dec 01, 2023 at 11:17:10AM -0500, Frank Li wrote:
> Add suspend/resume support for Layerscape LS1021a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to
> check if the controller has received the PME_To_Ack from the endpoint or
> not. So to be on the safer side, the driver just waits for
> PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
> bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
> state depending on the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a
> software reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

One comment below. With that addressed,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---
> 
> Notes:
>     Change from v4 to v5
>     - update comit message
>     - remove a empty line
>     - use comments
>     /* Reset the PEX wrapper to bring the link out of L2 */
>     - pci->pp.ops = pcie->drvdata->ops,
>     ls_pcie_host_ops to the "ops" member of layerscape_drvdata.
>     - don't set pcie->scfg = NULL at error path
>     
>     Change from v3 to v4
>     - update commit message.
>     - it is reset a glue logic part for PCI controller.
>     - use regmap_write_bits() to reduce code change.
>     
>     Change from v2 to v3
>     - update according to mani's feedback
>     change from v1 to v2
>     - change subject 'a' to 'A'
> 
>  drivers/pci/controller/dwc/pci-layerscape.c | 81 ++++++++++++++++++++-
>  1 file changed, 80 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index aea89926bcc4f..8bdaae9be7d56 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -35,11 +35,19 @@
>  #define PF_MCR_PTOMR		BIT(0)
>  #define PF_MCR_EXL2S		BIT(1)
>  
> +/* LS1021A PEXn PM Write Control Register */
> +#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
> +#define PMXMTTURNOFF		BIT(31)
> +#define SCFG_PEXSFTRSTCR	0x190
> +#define PEXSR(idx)		BIT(idx)
> +
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
>  	const u32 pf_off;
> +	const struct dw_pcie_host_ops *ops;
>  	int (*exit_from_l2)(struct dw_pcie_rp *pp);
> +	bool scfg_support;
>  	bool pm_support;
>  };
>  
> @@ -47,6 +55,8 @@ struct ls_pcie {
>  	struct dw_pcie *pci;
>  	const struct ls_pcie_drvdata *drvdata;
>  	void __iomem *pf_base;
> +	struct regmap *scfg;
> +	int index;
>  	bool big_endian;
>  };
>  
> @@ -171,18 +181,70 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
>  	return 0;
>  }
>  
> +static void scfg_pcie_send_turnoff_msg(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Send PME_Turn_Off message */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +
> +	/*
> +	 * There is no specific register to check for PME_To_Ack from endpoint.
> +	 * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
> +	 */
> +	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> +
> +	/*
> +	 * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
> +	 * to complete the PME_Turn_Off handshake.
> +	 */
> +	regmap_write_bits(scfg, reg, mask, 0);
> +}
> +
> +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), PMXMTTURNOFF);
> +}
> +
> +static int scfg_pcie_exit_from_l2(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Reset the PEX wrapper to bring the link out of L2 */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +	regmap_write_bits(scfg, reg, mask, 0);
> +
> +	return 0;
> +}
> +
> +static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
> +}
> +
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>  	.host_init = ls_pcie_host_init,
>  	.pme_turn_off = ls_pcie_send_turnoff_msg,
>  };
>  
> +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> +	.host_init = ls_pcie_host_init,
> +	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> +};
> +
>  static const struct ls_pcie_drvdata ls1021a_drvdata = {
> -	.pm_support = false,
> +	.pm_support = true,
> +	.scfg_support = true,
> +	.ops = &ls1021a_pcie_host_ops,
> +	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
>  };
>  
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
>  	.pf_off = 0xc0000,
>  	.pm_support = true,
> +	.ops = &ls_pcie_host_ops;
>  	.exit_from_l2 = ls_pcie_exit_from_l2,
>  };
>  
> @@ -205,6 +267,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	struct dw_pcie *pci;
>  	struct ls_pcie *pcie;
>  	struct resource *dbi_base;
> +	u32 index[2];
> +	int ret;
>  
>  	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>  	if (!pcie)
> @@ -220,6 +284,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	pci->pp.ops = &ls_pcie_host_ops;

This should be removed now.

- Mani

>  
>  	pcie->pci = pci;
> +	pci->pp.ops = pcie->drvdata->ops;
>  
>  	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
>  	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> @@ -230,6 +295,20 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  
>  	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
>  
> +	if (pcie->drvdata->scfg_support) {
> +		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> +		if (IS_ERR(pcie->scfg)) {
> +			dev_err(dev, "No syscfg phandle specified\n");
> +			return PTR_ERR(pcie->scfg);
> +		}
> +
> +		ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
> +		if (ret)
> +			return ret;
> +
> +		pcie->index = index[1];
> +	}
> +
>  	if (!ls_pcie_is_bridge(pcie))
>  		return -ENODEV;
>  
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-12-04 10:59 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-01 16:17 [PATCH v5 0/4] PCI: layerscape: Add suspend/resume support for ls1043 and ls1021 Frank Li
2023-12-01 16:17 ` Frank Li
2023-12-01 16:17 ` Frank Li
2023-12-01 16:17 ` [PATCH v5 1/4] PCI: layerscape: Add function pointer for exit_from_l2() Frank Li
2023-12-01 16:17   ` Frank Li
2023-12-01 16:17   ` Frank Li
2023-12-01 16:55   ` Roy Zang
2023-12-01 16:55     ` Roy Zang
2023-12-01 16:55     ` Roy Zang
2023-12-01 16:17 ` [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a Frank Li
2023-12-01 16:17   ` Frank Li
2023-12-01 16:17   ` Frank Li
2023-12-01 16:57   ` Roy Zang
2023-12-01 16:57     ` Roy Zang
2023-12-01 16:57     ` Roy Zang
2023-12-04 10:59   ` Manivannan Sadhasivam [this message]
2023-12-04 10:59     ` Manivannan Sadhasivam
2023-12-04 10:59     ` Manivannan Sadhasivam
2023-12-01 16:17 ` [PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_* Frank Li
2023-12-01 16:17   ` Frank Li
2023-12-01 16:17   ` Frank Li
2023-12-01 16:58   ` Roy Zang
2023-12-01 16:58     ` Roy Zang
2023-12-01 16:58     ` Roy Zang
2023-12-04 11:02   ` Manivannan Sadhasivam
2023-12-04 11:02     ` Manivannan Sadhasivam
2023-12-04 11:02     ` Manivannan Sadhasivam
2023-12-01 16:17 ` [PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a Frank Li
2023-12-01 16:17   ` Frank Li
2023-12-01 16:17   ` Frank Li
2023-12-01 17:00   ` Roy Zang
2023-12-01 17:00     ` Roy Zang
2023-12-01 17:00     ` Roy Zang
2023-12-04 11:03   ` Manivannan Sadhasivam
2023-12-04 11:03     ` Manivannan Sadhasivam
2023-12-04 11:03     ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231204105931.GB35383@thinkpad \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=Frank.Li@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=imx@lists.linux.dev \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=lpieralisi@kernel.org \
    --cc=minghuan.Lian@nxp.com \
    --cc=mingkai.hu@nxp.com \
    --cc=robh@kernel.org \
    --cc=roy.zang@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.