From: Stefan Wahren <wahrenst@gmx.net>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Florian Fainelli <florian.fainelli@broadcom.com>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: bcm-kernel-feedback-list@broadcom.com,
Cyril Brulebois <kibi@debian.org>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH V4 0/3] ARM: dts: bcm2711: Add BCM2711 xHCI support
Date: Tue, 5 Dec 2023 21:05:28 +0100 [thread overview]
Message-ID: <20231205200531.8232-1-wahrenst@gmx.net> (raw)
In contrast to the Raspberry Pi 4, the Compute Module 4 or the IO board
does not have a VL805 USB 3.0 host controller, which is connected via
PCIe. Instead, the Compute Module provides the built-in
xHCI of the BCM2711 SoC.
Changes in V4:
- use "brcm,xhci-brcm-v2" as fallback compatible as suggested by
Conor & Florian
Changes in V3:
- introduce a new compatible for BCM2711 in order to make the
power domain dependency SoC specific, which also results in
a driver change
Changes in V2:
- adjust xHCI compatible as suggested by Justin & Florian
- keep xHCI disabled in order to let the bootloader decide which
USB block should be enabled, which result in a drop of patch 3
Stefan Wahren (3):
dt-bindings: usb: xhci: add support for BCM2711
usb: xhci: xhci-plat: Add support for BCM2711
ARM: dts: bcm2711: Add BCM2711 xHCI support
.../devicetree/bindings/usb/generic-xhci.yaml | 25 ++++++++++++++++---
arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi | 5 ++++
arch/arm/boot/dts/broadcom/bcm2711.dtsi | 14 +++++++++++
drivers/usb/host/xhci-plat.c | 3 +++
4 files changed, 44 insertions(+), 3 deletions(-)
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <wahrenst@gmx.net>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Florian Fainelli <florian.fainelli@broadcom.com>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: bcm-kernel-feedback-list@broadcom.com,
Cyril Brulebois <kibi@debian.org>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH V4 0/3] ARM: dts: bcm2711: Add BCM2711 xHCI support
Date: Tue, 5 Dec 2023 21:05:28 +0100 [thread overview]
Message-ID: <20231205200531.8232-1-wahrenst@gmx.net> (raw)
In contrast to the Raspberry Pi 4, the Compute Module 4 or the IO board
does not have a VL805 USB 3.0 host controller, which is connected via
PCIe. Instead, the Compute Module provides the built-in
xHCI of the BCM2711 SoC.
Changes in V4:
- use "brcm,xhci-brcm-v2" as fallback compatible as suggested by
Conor & Florian
Changes in V3:
- introduce a new compatible for BCM2711 in order to make the
power domain dependency SoC specific, which also results in
a driver change
Changes in V2:
- adjust xHCI compatible as suggested by Justin & Florian
- keep xHCI disabled in order to let the bootloader decide which
USB block should be enabled, which result in a drop of patch 3
Stefan Wahren (3):
dt-bindings: usb: xhci: add support for BCM2711
usb: xhci: xhci-plat: Add support for BCM2711
ARM: dts: bcm2711: Add BCM2711 xHCI support
.../devicetree/bindings/usb/generic-xhci.yaml | 25 ++++++++++++++++---
arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi | 5 ++++
arch/arm/boot/dts/broadcom/bcm2711.dtsi | 14 +++++++++++
drivers/usb/host/xhci-plat.c | 3 +++
4 files changed, 44 insertions(+), 3 deletions(-)
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-12-05 20:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-05 20:05 Stefan Wahren [this message]
2023-12-05 20:05 ` [PATCH V4 0/3] ARM: dts: bcm2711: Add BCM2711 xHCI support Stefan Wahren
2023-12-05 20:05 ` [PATCH V4 1/3] dt-bindings: usb: xhci: Add support for BCM2711 Stefan Wahren
2023-12-05 20:05 ` Stefan Wahren
2023-12-05 22:51 ` Florian Fainelli
2023-12-05 22:51 ` Florian Fainelli
2023-12-05 20:05 ` [PATCH V4 2/3] usb: xhci: xhci-plat: " Stefan Wahren
2023-12-05 20:05 ` Stefan Wahren
2023-12-05 22:53 ` Florian Fainelli
2023-12-05 22:53 ` Florian Fainelli
2023-12-05 20:05 ` [PATCH V4 3/3] ARM: dts: bcm2711: Add BCM2711 xHCI support Stefan Wahren
2023-12-05 20:05 ` Stefan Wahren
2023-12-05 22:53 ` Florian Fainelli
2023-12-05 22:53 ` Florian Fainelli
2023-12-12 19:09 ` [PATCH V4 0/3] " Cyril Brulebois
2023-12-12 19:09 ` Cyril Brulebois
2023-12-12 19:16 ` Stefan Wahren
2023-12-12 19:16 ` Stefan Wahren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231205200531.8232-1-wahrenst@gmx.net \
--to=wahrenst@gmx.net \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=florian.fainelli@broadcom.com \
--cc=gregkh@linuxfoundation.org \
--cc=kibi@debian.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.