From: Florian Fainelli <florian.fainelli@broadcom.com>
To: Stefan Wahren <wahrenst@gmx.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: bcm-kernel-feedback-list@broadcom.com,
Cyril Brulebois <kibi@debian.org>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH V4 3/3] ARM: dts: bcm2711: Add BCM2711 xHCI support
Date: Tue, 5 Dec 2023 14:53:56 -0800 [thread overview]
Message-ID: <ae9171c1-af2c-4bd2-82f4-a7598aa92959@broadcom.com> (raw)
In-Reply-To: <20231205200531.8232-4-wahrenst@gmx.net>
[-- Attachment #1: Type: text/plain, Size: 452 bytes --]
On 12/5/23 12:05, Stefan Wahren wrote:
> The BCM2711 SoC also has a mostly generic xHCI. The USB port is
> currently only usable on the Compute Module 4 (e.g. via IO board).
> Because DWC2 and xHCI share the same PHY, we let the bootloader
> enable it on demand.
>
> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
--
Florian
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4221 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <florian.fainelli@broadcom.com>
To: Stefan Wahren <wahrenst@gmx.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: bcm-kernel-feedback-list@broadcom.com,
Cyril Brulebois <kibi@debian.org>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH V4 3/3] ARM: dts: bcm2711: Add BCM2711 xHCI support
Date: Tue, 5 Dec 2023 14:53:56 -0800 [thread overview]
Message-ID: <ae9171c1-af2c-4bd2-82f4-a7598aa92959@broadcom.com> (raw)
In-Reply-To: <20231205200531.8232-4-wahrenst@gmx.net>
[-- Attachment #1.1: Type: text/plain, Size: 452 bytes --]
On 12/5/23 12:05, Stefan Wahren wrote:
> The BCM2711 SoC also has a mostly generic xHCI. The USB port is
> currently only usable on the Compute Module 4 (e.g. via IO board).
> Because DWC2 and xHCI share the same PHY, we let the bootloader
> enable it on demand.
>
> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
--
Florian
[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4221 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-05 22:53 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-05 20:05 [PATCH V4 0/3] ARM: dts: bcm2711: Add BCM2711 xHCI support Stefan Wahren
2023-12-05 20:05 ` Stefan Wahren
2023-12-05 20:05 ` [PATCH V4 1/3] dt-bindings: usb: xhci: Add support for BCM2711 Stefan Wahren
2023-12-05 20:05 ` Stefan Wahren
2023-12-05 22:51 ` Florian Fainelli
2023-12-05 22:51 ` Florian Fainelli
2023-12-05 20:05 ` [PATCH V4 2/3] usb: xhci: xhci-plat: " Stefan Wahren
2023-12-05 20:05 ` Stefan Wahren
2023-12-05 22:53 ` Florian Fainelli
2023-12-05 22:53 ` Florian Fainelli
2023-12-05 20:05 ` [PATCH V4 3/3] ARM: dts: bcm2711: Add BCM2711 xHCI support Stefan Wahren
2023-12-05 20:05 ` Stefan Wahren
2023-12-05 22:53 ` Florian Fainelli [this message]
2023-12-05 22:53 ` Florian Fainelli
2023-12-12 19:09 ` [PATCH V4 0/3] " Cyril Brulebois
2023-12-12 19:09 ` Cyril Brulebois
2023-12-12 19:16 ` Stefan Wahren
2023-12-12 19:16 ` Stefan Wahren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ae9171c1-af2c-4bd2-82f4-a7598aa92959@broadcom.com \
--to=florian.fainelli@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kibi@debian.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=robh+dt@kernel.org \
--cc=wahrenst@gmx.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.