Re: [PATCH v3 2/3] dt-bindings: atmel,hlcdc: convert pwm bindings to json-schema

From: Rob Herring <robh@kernel.org>
To: Dharma Balasubiramani <dharma.b@microchip.com>
Cc: conor.dooley@microchip.com, sam@ravnborg.org,
	bbrezillon@kernel.org, maarten.lankhorst@linux.intel.com,
	mripard@kernel.org, tzimmermann@suse.de, airlied@gmail.com,
	daniel@ffwll.ch, krzysztof.kozlowski+dt@linaro.org,
	conor+dt@kernel.org, nicolas.ferre@microchip.com,
	alexandre.belloni@bootlin.com, claudiu.beznea@tuxon.dev,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, lee@kernel.org,
	thierry.reding@gmail.com, u.kleine-koenig@pengutronix.de,
	linux-pwm@vger.kernel.org, linux4microchip@microchip.com
Subject: Re: [PATCH v3 2/3] dt-bindings: atmel,hlcdc: convert pwm bindings to json-schema
Date: Fri, 19 Jan 2024 13:45:34 -0600	[thread overview]
Message-ID: <20240119194534.GA938671-robh@kernel.org> (raw)
In-Reply-To: <20240118092612.117491-3-dharma.b@microchip.com>

On Thu, Jan 18, 2024 at 02:56:11PM +0530, Dharma Balasubiramani wrote:
> Convert device tree bindings for Atmel's HLCDC PWM controller to YAML
> format.
> 
> Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> changelog
> v2 -> v3
> - Remove '|' in description, as there is no formatting to preserve.
> - Delete the description for pwm-cells.
> - Drop the label for pwm node as it not used.
> v1 -> v2
> - Remove the explicit copyrights.
> - Modify title (not include words like binding/driver).
> - Modify description actually describing the hardware and not the driver.
> - Remove pinctrl properties which aren't required.
> - Drop parent node and it's other sub-device node which are not related here.
> ---
>  .../bindings/pwm/atmel,hlcdc-pwm.yaml         | 44 +++++++++++++++++++
>  .../bindings/pwm/atmel-hlcdc-pwm.txt          | 29 ------------
>  2 files changed, 44 insertions(+), 29 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml
>  delete mode 100644 Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
> 
> diff --git a/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml
> new file mode 100644
> index 000000000000..4f4cc21fe4f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml
> @@ -0,0 +1,44 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/atmel,hlcdc-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel's HLCDC's PWM controller
> +
> +maintainers:
> +  - Nicolas Ferre <nicolas.ferre@microchip.com>
> +  - Alexandre Belloni <alexandre.belloni@bootlin.com>
> +  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
> +
> +description:
> +  The LCDC integrates a Pulse Width Modulation (PWM) Controller. This block
> +  generates the LCD contrast control signal (LCD_PWM) that controls the
> +  display's contrast by software. LCDC_PWM is an 8-bit PWM signal that can be
> +  converted to an analog voltage with a simple passive filter. LCD display
> +  panels have different backlight specifications in terms of minimum/maximum
> +  values for PWM frequency. If the LCDC PWM frequency range does not match the
> +  LCD display panel, it is possible to use the standalone PWM Controller to
> +  drive the backlight.
> +
> +properties:
> +  compatible:
> +    const: atmel,hlcdc-pwm
> +
> +  "#pwm-cells":
> +    const: 3
> +
> +required:
> +  - compatible
> +  - "#pwm-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pwm {
> +      compatible = "atmel,hlcdc-pwm";
> +      pinctrl-names = "default";
> +      pinctrl-0 = <&pinctrl_lcd_pwm>;
> +      #pwm-cells = <3>;
> +    };

Move the example to the MFD schema. Or just drop if already there.

Rob