From: Daniel Thompson <daniel.thompson@linaro.org>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org,
linux-kernel@vger.kernel.org, Lee Jones <lee@kernel.org>,
Jingoo Han <jingoohan1@gmail.com>, Helge Deller <deller@gmx.de>
Subject: Re: [PATCH v1 1/4] backlight: hx8357: Make use of device properties
Date: Wed, 24 Jan 2024 17:19:53 +0000 [thread overview]
Message-ID: <20240124171953.GA15539@aspen.lan> (raw)
In-Reply-To: <20240114152759.1040563-2-andriy.shevchenko@linux.intel.com>
On Sun, Jan 14, 2024 at 05:25:08PM +0200, Andy Shevchenko wrote:
> Convert the module to be property provider agnostic and allow
> it to be used on non-OF platforms.
>
> Include mod_devicetable.h explicitly to replace the dropped of.h
> which included mod_devicetable.h indirectly.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> drivers/video/backlight/hx8357.c | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
> index bf18337ff0c2..c7fd10d55c5d 100644
> --- a/drivers/video/backlight/hx8357.c
> +++ b/drivers/video/backlight/hx8357.c
> @@ -8,9 +8,9 @@
> #include <linux/delay.h>
> #include <linux/gpio/consumer.h>
> #include <linux/lcd.h>
> +#include <linux/mod_devicetable.h>
> #include <linux/module.h>
> -#include <linux/of.h>
> -#include <linux/of_device.h>
> +#include <linux/property.h>
> #include <linux/spi/spi.h>
>
> #define HX8357_NUM_IM_PINS 3
> @@ -564,6 +564,8 @@ static struct lcd_ops hx8357_ops = {
> .get_power = hx8357_get_power,
> };
>
> +typedef int (*hx8357_init)(struct lcd_device *);
> +
> static const struct of_device_id hx8357_dt_ids[] = {
> {
> .compatible = "himax,hx8357",
> @@ -582,7 +584,7 @@ static int hx8357_probe(struct spi_device *spi)
> struct device *dev = &spi->dev;
> struct lcd_device *lcdev;
> struct hx8357_data *lcd;
> - const struct of_device_id *match;
> + hx8357_init init;
As somewhere else in this thread, I'd find this a lot more readable
as:
hx8357_init_fn init_fn;
Other than that, LGTM.
Daniel.
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Thompson <daniel.thompson@linaro.org>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-fbdev@vger.kernel.org, Jingoo Han <jingoohan1@gmail.com>,
Helge Deller <deller@gmx.de>, Lee Jones <lee@kernel.org>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v1 1/4] backlight: hx8357: Make use of device properties
Date: Wed, 24 Jan 2024 17:19:53 +0000 [thread overview]
Message-ID: <20240124171953.GA15539@aspen.lan> (raw)
In-Reply-To: <20240114152759.1040563-2-andriy.shevchenko@linux.intel.com>
On Sun, Jan 14, 2024 at 05:25:08PM +0200, Andy Shevchenko wrote:
> Convert the module to be property provider agnostic and allow
> it to be used on non-OF platforms.
>
> Include mod_devicetable.h explicitly to replace the dropped of.h
> which included mod_devicetable.h indirectly.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> drivers/video/backlight/hx8357.c | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
> index bf18337ff0c2..c7fd10d55c5d 100644
> --- a/drivers/video/backlight/hx8357.c
> +++ b/drivers/video/backlight/hx8357.c
> @@ -8,9 +8,9 @@
> #include <linux/delay.h>
> #include <linux/gpio/consumer.h>
> #include <linux/lcd.h>
> +#include <linux/mod_devicetable.h>
> #include <linux/module.h>
> -#include <linux/of.h>
> -#include <linux/of_device.h>
> +#include <linux/property.h>
> #include <linux/spi/spi.h>
>
> #define HX8357_NUM_IM_PINS 3
> @@ -564,6 +564,8 @@ static struct lcd_ops hx8357_ops = {
> .get_power = hx8357_get_power,
> };
>
> +typedef int (*hx8357_init)(struct lcd_device *);
> +
> static const struct of_device_id hx8357_dt_ids[] = {
> {
> .compatible = "himax,hx8357",
> @@ -582,7 +584,7 @@ static int hx8357_probe(struct spi_device *spi)
> struct device *dev = &spi->dev;
> struct lcd_device *lcdev;
> struct hx8357_data *lcd;
> - const struct of_device_id *match;
> + hx8357_init init;
As somewhere else in this thread, I'd find this a lot more readable
as:
hx8357_init_fn init_fn;
Other than that, LGTM.
Daniel.
next prev parent reply other threads:[~2024-01-24 17:19 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-14 15:25 [PATCH v1 0/4] backlight: hx8357: Clean up and make OF-independent Andy Shevchenko
2024-01-14 15:25 ` Andy Shevchenko
2024-01-14 15:25 ` [PATCH v1 1/4] backlight: hx8357: Make use of device properties Andy Shevchenko
2024-01-14 15:25 ` Andy Shevchenko
2024-01-15 8:20 ` Javier Martinez Canillas
2024-01-21 13:48 ` Andy Shevchenko
2024-01-21 13:48 ` Andy Shevchenko
2024-01-22 10:35 ` Daniel Thompson
2024-01-22 10:35 ` Daniel Thompson
2024-01-24 17:19 ` Daniel Thompson [this message]
2024-01-24 17:19 ` Daniel Thompson
2024-01-28 14:38 ` Andy Shevchenko
2024-01-28 14:38 ` Andy Shevchenko
2024-01-14 15:25 ` [PATCH v1 2/4] backlight: hx8357: Move OF table closer to its consumer Andy Shevchenko
2024-01-14 15:25 ` Andy Shevchenko
2024-01-15 8:22 ` Javier Martinez Canillas
2024-01-21 13:49 ` Andy Shevchenko
2024-01-21 13:49 ` Andy Shevchenko
2024-01-22 10:43 ` Daniel Thompson
2024-01-22 10:43 ` Daniel Thompson
2024-01-24 17:21 ` Daniel Thompson
2024-01-24 17:21 ` Daniel Thompson
2024-01-14 15:25 ` [PATCH v1 3/4] backlight: hx8357: Make use of dev_err_probe() Andy Shevchenko
2024-01-14 15:25 ` Andy Shevchenko
2024-01-15 8:24 ` Javier Martinez Canillas
2024-01-24 17:24 ` Daniel Thompson
2024-01-24 17:24 ` Daniel Thompson
2024-01-14 15:25 ` [PATCH v1 4/4] backlight: hx8357: Utilise temporary variable for struct device Andy Shevchenko
2024-01-14 15:25 ` Andy Shevchenko
2024-01-15 8:27 ` Javier Martinez Canillas
2024-01-24 17:25 ` Daniel Thompson
2024-01-24 17:25 ` Daniel Thompson
2024-01-28 14:39 ` Andy Shevchenko
2024-01-28 14:39 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240124171953.GA15539@aspen.lan \
--to=daniel.thompson@linaro.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=deller@gmx.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=jingoohan1@gmail.com \
--cc=lee@kernel.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.