From: Anup Patel <apatel@ventanamicro.com>
To: Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Frank Rowand <frowand.list@gmail.com>,
Conor Dooley <conor+dt@kernel.org>
Cc: "Anup Patel" <apatel@ventanamicro.com>,
devicetree@vger.kernel.org,
"Saravana Kannan" <saravanak@google.com>,
"Marc Zyngier" <maz@kernel.org>,
"Anup Patel" <anup@brainfault.org>,
linux-kernel@vger.kernel.org, "Björn Töpel" <bjorn@kernel.org>,
"Atish Patra" <atishp@atishpatra.org>,
linux-riscv@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
"Andrew Jones" <ajones@ventanamicro.com>
Subject: [PATCH v13 03/13] irqchip/riscv-intc: Add support for RISC-V AIA
Date: Tue, 20 Feb 2024 11:37:08 +0530 [thread overview]
Message-ID: <20240220060718.823229-4-apatel@ventanamicro.com> (raw)
In-Reply-To: <20240220060718.823229-1-apatel@ventanamicro.com>
The RISC-V advanced interrupt architecture (AIA) extends the per-HART
local interrupts in following ways:
1. Minimum 64 local interrupts for both RV32 and RV64
2. Ability to process multiple pending local interrupts in same
interrupt handler
3. Priority configuration for each local interrupts
4. Special CSRs to configure/access the per-HART MSI controller
We add support for #1 and #2 described above in the RISC-V intc driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
drivers/irqchip/irq-riscv-intc.c | 34 ++++++++++++++++++++++++++------
1 file changed, 28 insertions(+), 6 deletions(-)
diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index e8d01b14ccdd..bab536bbaf2c 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/smp.h>
+#include <asm/hwcap.h>
static struct irq_domain *intc_domain;
@@ -30,6 +31,15 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
generic_handle_domain_irq(intc_domain, cause);
}
+static asmlinkage void riscv_intc_aia_irq(struct pt_regs *regs)
+{
+ unsigned long topi;
+
+ while ((topi = csr_read(CSR_TOPI)))
+ generic_handle_domain_irq(intc_domain,
+ topi >> TOPI_IID_SHIFT);
+}
+
/*
* On RISC-V systems local interrupts are masked or unmasked by writing
* the SIE (Supervisor Interrupt Enable) CSR. As CSRs can only be written
@@ -39,12 +49,18 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
static void riscv_intc_irq_mask(struct irq_data *d)
{
- csr_clear(CSR_IE, BIT(d->hwirq));
+ if (IS_ENABLED(CONFIG_32BIT) && d->hwirq >= BITS_PER_LONG)
+ csr_clear(CSR_IEH, BIT(d->hwirq - BITS_PER_LONG));
+ else
+ csr_clear(CSR_IE, BIT(d->hwirq));
}
static void riscv_intc_irq_unmask(struct irq_data *d)
{
- csr_set(CSR_IE, BIT(d->hwirq));
+ if (IS_ENABLED(CONFIG_32BIT) && d->hwirq >= BITS_PER_LONG)
+ csr_set(CSR_IEH, BIT(d->hwirq - BITS_PER_LONG));
+ else
+ csr_set(CSR_IE, BIT(d->hwirq));
}
static void riscv_intc_irq_eoi(struct irq_data *d)
@@ -115,16 +131,20 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
static int __init riscv_intc_init_common(struct fwnode_handle *fn)
{
- int rc;
+ int rc, nr_irqs = riscv_isa_extension_available(NULL, SxAIA) ?
+ 64 : BITS_PER_LONG;
- intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
+ intc_domain = irq_domain_create_linear(fn, nr_irqs,
&riscv_intc_domain_ops, NULL);
if (!intc_domain) {
pr_err("unable to add IRQ domain\n");
return -ENXIO;
}
- rc = set_handle_irq(&riscv_intc_irq);
+ if (riscv_isa_extension_available(NULL, SxAIA))
+ rc = set_handle_irq(&riscv_intc_aia_irq);
+ else
+ rc = set_handle_irq(&riscv_intc_irq);
if (rc) {
pr_err("failed to set irq handler\n");
return rc;
@@ -132,7 +152,9 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
- pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+ pr_info("%d local interrupts mapped%s\n",
+ nr_irqs, riscv_isa_extension_available(NULL, SxAIA) ?
+ " using AIA" : "");
return 0;
}
--
2.34.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Anup Patel <apatel@ventanamicro.com>
To: Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Frank Rowand <frowand.list@gmail.com>,
Conor Dooley <conor+dt@kernel.org>
Cc: "Marc Zyngier" <maz@kernel.org>, "Björn Töpel" <bjorn@kernel.org>,
"Atish Patra" <atishp@atishpatra.org>,
"Andrew Jones" <ajones@ventanamicro.com>,
"Sunil V L" <sunilvl@ventanamicro.com>,
"Saravana Kannan" <saravanak@google.com>,
"Anup Patel" <anup@brainfault.org>,
linux-riscv@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
"Anup Patel" <apatel@ventanamicro.com>
Subject: [PATCH v13 03/13] irqchip/riscv-intc: Add support for RISC-V AIA
Date: Tue, 20 Feb 2024 11:37:08 +0530 [thread overview]
Message-ID: <20240220060718.823229-4-apatel@ventanamicro.com> (raw)
In-Reply-To: <20240220060718.823229-1-apatel@ventanamicro.com>
The RISC-V advanced interrupt architecture (AIA) extends the per-HART
local interrupts in following ways:
1. Minimum 64 local interrupts for both RV32 and RV64
2. Ability to process multiple pending local interrupts in same
interrupt handler
3. Priority configuration for each local interrupts
4. Special CSRs to configure/access the per-HART MSI controller
We add support for #1 and #2 described above in the RISC-V intc driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
drivers/irqchip/irq-riscv-intc.c | 34 ++++++++++++++++++++++++++------
1 file changed, 28 insertions(+), 6 deletions(-)
diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index e8d01b14ccdd..bab536bbaf2c 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/smp.h>
+#include <asm/hwcap.h>
static struct irq_domain *intc_domain;
@@ -30,6 +31,15 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
generic_handle_domain_irq(intc_domain, cause);
}
+static asmlinkage void riscv_intc_aia_irq(struct pt_regs *regs)
+{
+ unsigned long topi;
+
+ while ((topi = csr_read(CSR_TOPI)))
+ generic_handle_domain_irq(intc_domain,
+ topi >> TOPI_IID_SHIFT);
+}
+
/*
* On RISC-V systems local interrupts are masked or unmasked by writing
* the SIE (Supervisor Interrupt Enable) CSR. As CSRs can only be written
@@ -39,12 +49,18 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
static void riscv_intc_irq_mask(struct irq_data *d)
{
- csr_clear(CSR_IE, BIT(d->hwirq));
+ if (IS_ENABLED(CONFIG_32BIT) && d->hwirq >= BITS_PER_LONG)
+ csr_clear(CSR_IEH, BIT(d->hwirq - BITS_PER_LONG));
+ else
+ csr_clear(CSR_IE, BIT(d->hwirq));
}
static void riscv_intc_irq_unmask(struct irq_data *d)
{
- csr_set(CSR_IE, BIT(d->hwirq));
+ if (IS_ENABLED(CONFIG_32BIT) && d->hwirq >= BITS_PER_LONG)
+ csr_set(CSR_IEH, BIT(d->hwirq - BITS_PER_LONG));
+ else
+ csr_set(CSR_IE, BIT(d->hwirq));
}
static void riscv_intc_irq_eoi(struct irq_data *d)
@@ -115,16 +131,20 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
static int __init riscv_intc_init_common(struct fwnode_handle *fn)
{
- int rc;
+ int rc, nr_irqs = riscv_isa_extension_available(NULL, SxAIA) ?
+ 64 : BITS_PER_LONG;
- intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
+ intc_domain = irq_domain_create_linear(fn, nr_irqs,
&riscv_intc_domain_ops, NULL);
if (!intc_domain) {
pr_err("unable to add IRQ domain\n");
return -ENXIO;
}
- rc = set_handle_irq(&riscv_intc_irq);
+ if (riscv_isa_extension_available(NULL, SxAIA))
+ rc = set_handle_irq(&riscv_intc_aia_irq);
+ else
+ rc = set_handle_irq(&riscv_intc_irq);
if (rc) {
pr_err("failed to set irq handler\n");
return rc;
@@ -132,7 +152,9 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
- pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+ pr_info("%d local interrupts mapped%s\n",
+ nr_irqs, riscv_isa_extension_available(NULL, SxAIA) ?
+ " using AIA" : "");
return 0;
}
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Anup Patel <apatel@ventanamicro.com>
To: Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Frank Rowand <frowand.list@gmail.com>,
Conor Dooley <conor+dt@kernel.org>
Cc: "Marc Zyngier" <maz@kernel.org>, "Björn Töpel" <bjorn@kernel.org>,
"Atish Patra" <atishp@atishpatra.org>,
"Andrew Jones" <ajones@ventanamicro.com>,
"Sunil V L" <sunilvl@ventanamicro.com>,
"Saravana Kannan" <saravanak@google.com>,
"Anup Patel" <anup@brainfault.org>,
linux-riscv@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
"Anup Patel" <apatel@ventanamicro.com>
Subject: [PATCH v13 03/13] irqchip/riscv-intc: Add support for RISC-V AIA
Date: Tue, 20 Feb 2024 11:37:08 +0530 [thread overview]
Message-ID: <20240220060718.823229-4-apatel@ventanamicro.com> (raw)
In-Reply-To: <20240220060718.823229-1-apatel@ventanamicro.com>
The RISC-V advanced interrupt architecture (AIA) extends the per-HART
local interrupts in following ways:
1. Minimum 64 local interrupts for both RV32 and RV64
2. Ability to process multiple pending local interrupts in same
interrupt handler
3. Priority configuration for each local interrupts
4. Special CSRs to configure/access the per-HART MSI controller
We add support for #1 and #2 described above in the RISC-V intc driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
drivers/irqchip/irq-riscv-intc.c | 34 ++++++++++++++++++++++++++------
1 file changed, 28 insertions(+), 6 deletions(-)
diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index e8d01b14ccdd..bab536bbaf2c 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/smp.h>
+#include <asm/hwcap.h>
static struct irq_domain *intc_domain;
@@ -30,6 +31,15 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
generic_handle_domain_irq(intc_domain, cause);
}
+static asmlinkage void riscv_intc_aia_irq(struct pt_regs *regs)
+{
+ unsigned long topi;
+
+ while ((topi = csr_read(CSR_TOPI)))
+ generic_handle_domain_irq(intc_domain,
+ topi >> TOPI_IID_SHIFT);
+}
+
/*
* On RISC-V systems local interrupts are masked or unmasked by writing
* the SIE (Supervisor Interrupt Enable) CSR. As CSRs can only be written
@@ -39,12 +49,18 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
static void riscv_intc_irq_mask(struct irq_data *d)
{
- csr_clear(CSR_IE, BIT(d->hwirq));
+ if (IS_ENABLED(CONFIG_32BIT) && d->hwirq >= BITS_PER_LONG)
+ csr_clear(CSR_IEH, BIT(d->hwirq - BITS_PER_LONG));
+ else
+ csr_clear(CSR_IE, BIT(d->hwirq));
}
static void riscv_intc_irq_unmask(struct irq_data *d)
{
- csr_set(CSR_IE, BIT(d->hwirq));
+ if (IS_ENABLED(CONFIG_32BIT) && d->hwirq >= BITS_PER_LONG)
+ csr_set(CSR_IEH, BIT(d->hwirq - BITS_PER_LONG));
+ else
+ csr_set(CSR_IE, BIT(d->hwirq));
}
static void riscv_intc_irq_eoi(struct irq_data *d)
@@ -115,16 +131,20 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
static int __init riscv_intc_init_common(struct fwnode_handle *fn)
{
- int rc;
+ int rc, nr_irqs = riscv_isa_extension_available(NULL, SxAIA) ?
+ 64 : BITS_PER_LONG;
- intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
+ intc_domain = irq_domain_create_linear(fn, nr_irqs,
&riscv_intc_domain_ops, NULL);
if (!intc_domain) {
pr_err("unable to add IRQ domain\n");
return -ENXIO;
}
- rc = set_handle_irq(&riscv_intc_irq);
+ if (riscv_isa_extension_available(NULL, SxAIA))
+ rc = set_handle_irq(&riscv_intc_aia_irq);
+ else
+ rc = set_handle_irq(&riscv_intc_irq);
if (rc) {
pr_err("failed to set irq handler\n");
return rc;
@@ -132,7 +152,9 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
- pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+ pr_info("%d local interrupts mapped%s\n",
+ nr_irqs, riscv_isa_extension_available(NULL, SxAIA) ?
+ " using AIA" : "");
return 0;
}
--
2.34.1
next prev parent reply other threads:[~2024-02-20 6:08 UTC|newest]
Thread overview: 123+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-20 6:07 [PATCH v13 00/13] Linux RISC-V AIA Support Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` [PATCH v13 01/13] irqchip/sifive-plic: Convert PLIC driver into a platform driver Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 10:09 ` Thomas Gleixner
2024-02-20 10:09 ` Thomas Gleixner
2024-02-20 10:09 ` Thomas Gleixner
2024-02-22 9:25 ` Anup Patel
2024-02-22 9:25 ` Anup Patel
2024-02-22 9:25 ` Anup Patel
2024-02-20 6:07 ` [PATCH v13 02/13] irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 10:11 ` Thomas Gleixner
2024-02-20 10:11 ` Thomas Gleixner
2024-02-20 10:11 ` Thomas Gleixner
2024-02-21 13:35 ` Anup Patel
2024-02-21 13:35 ` Anup Patel
2024-02-21 13:35 ` Anup Patel
2024-02-20 6:07 ` Anup Patel [this message]
2024-02-20 6:07 ` [PATCH v13 03/13] irqchip/riscv-intc: Add support for RISC-V AIA Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 10:13 ` Thomas Gleixner
2024-02-20 10:13 ` Thomas Gleixner
2024-02-20 10:13 ` Thomas Gleixner
2024-02-21 13:32 ` Anup Patel
2024-02-21 13:32 ` Anup Patel
2024-02-21 13:32 ` Anup Patel
2024-02-20 6:07 ` [PATCH v13 04/13] dt-bindings: interrupt-controller: Add RISC-V incoming MSI controller Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` [PATCH v13 05/13] genirq/matrix: Dynamic bitmap allocation Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` [PATCH v13 06/13] irqchip: Add RISC-V incoming MSI controller early driver Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 11:52 ` Björn Töpel
2024-02-20 11:52 ` Björn Töpel
2024-02-20 11:52 ` Björn Töpel
2024-02-20 13:00 ` Anup Patel
2024-02-20 13:00 ` Anup Patel
2024-02-20 13:00 ` Anup Patel
2024-02-21 11:59 ` Björn Töpel
2024-02-21 11:59 ` Björn Töpel
2024-02-21 11:59 ` Björn Töpel
2024-02-21 12:23 ` Anup Patel
2024-02-21 12:23 ` Anup Patel
2024-02-21 12:23 ` Anup Patel
2024-02-21 17:22 ` Björn Töpel
2024-02-21 17:22 ` Björn Töpel
2024-02-21 17:22 ` Björn Töpel
2024-02-20 11:53 ` Björn Töpel
2024-02-20 11:53 ` Björn Töpel
2024-02-20 11:53 ` Björn Töpel
2024-02-20 13:15 ` Anup Patel
2024-02-20 13:15 ` Anup Patel
2024-02-20 13:15 ` Anup Patel
2024-02-20 13:15 ` Thomas Gleixner
2024-02-20 13:15 ` Thomas Gleixner
2024-02-20 13:15 ` Thomas Gleixner
2024-02-20 16:33 ` Anup Patel
2024-02-20 16:33 ` Anup Patel
2024-02-20 16:33 ` Anup Patel
2024-02-20 6:07 ` [PATCH v13 07/13] irqchip/riscv-imsic: Add device MSI domain support for platform devices Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 11:53 ` Björn Töpel
2024-02-20 11:53 ` Björn Töpel
2024-02-20 11:53 ` Björn Töpel
2024-02-20 16:39 ` Anup Patel
2024-02-20 16:39 ` Anup Patel
2024-02-20 16:39 ` Anup Patel
2024-02-20 13:32 ` Thomas Gleixner
2024-02-20 13:32 ` Thomas Gleixner
2024-02-20 13:32 ` Thomas Gleixner
2024-02-20 16:52 ` Anup Patel
2024-02-20 16:52 ` Anup Patel
2024-02-20 16:52 ` Anup Patel
2024-02-20 17:12 ` Thomas Gleixner
2024-02-20 17:12 ` Thomas Gleixner
2024-02-20 17:12 ` Thomas Gleixner
2024-02-20 6:07 ` [PATCH v13 08/13] irqchip/riscv-imsic: Add device MSI domain support for PCI devices Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 13:35 ` Thomas Gleixner
2024-02-20 13:35 ` Thomas Gleixner
2024-02-20 13:35 ` Thomas Gleixner
2024-02-20 17:21 ` Anup Patel
2024-02-20 17:21 ` Anup Patel
2024-02-20 17:21 ` Anup Patel
2024-02-20 20:03 ` Thomas Gleixner
2024-02-20 20:03 ` Thomas Gleixner
2024-02-20 20:03 ` Thomas Gleixner
2024-02-20 6:07 ` [PATCH v13 09/13] dt-bindings: interrupt-controller: Add RISC-V advanced PLIC Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` [PATCH v13 10/13] irqchip: Add RISC-V advanced PLIC driver for direct-mode Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 13:40 ` Thomas Gleixner
2024-02-20 13:40 ` Thomas Gleixner
2024-02-20 13:40 ` Thomas Gleixner
2024-02-21 5:42 ` Anup Patel
2024-02-21 5:42 ` Anup Patel
2024-02-21 5:42 ` Anup Patel
2024-02-20 6:07 ` [PATCH v13 11/13] irqchip/riscv-aplic: Add support for MSI-mode Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` [PATCH v13 12/13] RISC-V: Select APLIC and IMSIC drivers Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` [PATCH v13 13/13] MAINTAINERS: Add entry for RISC-V AIA drivers Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 6:07 ` Anup Patel
2024-02-20 11:52 ` [PATCH v13 00/13] Linux RISC-V AIA Support Björn Töpel
2024-02-20 11:52 ` Björn Töpel
2024-02-20 11:52 ` Björn Töpel
2024-02-20 13:09 ` Anup Patel
2024-02-20 13:09 ` Anup Patel
2024-02-20 13:09 ` Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240220060718.823229-4-apatel@ventanamicro.com \
--to=apatel@ventanamicro.com \
--cc=ajones@ventanamicro.com \
--cc=anup@brainfault.org \
--cc=atishp@atishpatra.org \
--cc=bjorn@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=maz@kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=saravanak@google.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.