All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
	devicetree@vger.kernel.org, andi.shyti@kernel.org,
	eajames@linux.ibm.com, alistair@popple.id.au, joel@jms.id.au,
	jk@ozlabs.org, robh@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
	lakshmiy@us.ibmcom
Subject: [PATCH v2 12/31] fsi: core: Add common regmap master functions
Date: Mon, 26 Feb 2024 10:53:02 -0600	[thread overview]
Message-ID: <20240226165321.91976-13-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240226165321.91976-1-eajames@linux.ibm.com>

For hardware FSI masters (Aspeed and hub at the moment), the
initialization, link enable, and error recovery procedures are
common. Add a regmap pointer to the master structure so that master
drivers can let the common code handle these procedures.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 drivers/fsi/Kconfig        |   2 +
 drivers/fsi/fsi-core.c     | 161 ++++++++++++++++++++++++++++++++++++-
 drivers/fsi/fsi-master.h   |  16 ++++
 include/trace/events/fsi.h |  17 ++++
 4 files changed, 194 insertions(+), 2 deletions(-)

diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
index 79a31593618a..a6760870538d 100644
--- a/drivers/fsi/Kconfig
+++ b/drivers/fsi/Kconfig
@@ -7,6 +7,7 @@ menuconfig FSI
 	tristate "FSI support"
 	depends on OF
 	select CRC4
+	select REGMAP
 	help
 	  FSI - the FRU Support Interface - is a simple bus for low-level
 	  access to POWER-based hardware.
@@ -37,6 +38,7 @@ config FSI_MASTER_GPIO
 
 config FSI_MASTER_HUB
 	tristate "FSI hub master"
+	select REGMAP_FSI
 	help
 	This option enables a FSI hub master driver.  Hub is a type of FSI
 	master that is connected to the upstream master via a slave.  Hubs
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 8ad4feb71c8e..ce463ff8ef70 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -18,6 +18,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/bitops.h>
 #include <linux/cdev.h>
@@ -1148,18 +1149,50 @@ static int fsi_master_write(struct fsi_master *master, int link,
 	return rc;
 }
 
+int fsi_master_link_enable(struct fsi_master *master, int link, bool enable)
+{
+	u32 msiep = 0x80000000 >> (4 * (link % 8));
+	u32 menp = 0x80000000 >> (link % 32);
+	int enable_idx = 4 * (link / 32);
+	int irq_idx = 4 * (link / 8);
+	int rc;
+
+	if (enable) {
+		rc = regmap_write(master->map, FSI_MSENP0 + enable_idx, menp);
+		if (rc)
+			return rc;
+
+		mdelay(FSI_LINK_ENABLE_SETUP_TIME);
+
+		rc = regmap_write(master->map, FSI_MSSIEP0 + irq_idx, msiep);
+	} else {
+		rc = regmap_write(master->map, FSI_MCSIEP0 + irq_idx, msiep);
+		if (rc)
+			return rc;
+
+		rc = regmap_write(master->map, FSI_MCENP0 + enable_idx, menp);
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(fsi_master_link_enable);
+
 static int fsi_master_link_disable(struct fsi_master *master, int link)
 {
 	if (master->link_enable)
 		return master->link_enable(master, link, false);
+	else if (master->map)
+		return fsi_master_link_enable(master, link, false);
 
 	return 0;
 }
 
-static int fsi_master_link_enable(struct fsi_master *master, int link)
+static int _fsi_master_link_enable(struct fsi_master *master, int link)
 {
 	if (master->link_enable)
 		return master->link_enable(master, link, true);
+	else if (master->map)
+		return fsi_master_link_enable(master, link, true);
 
 	return 0;
 }
@@ -1187,7 +1220,7 @@ static int fsi_master_scan(struct fsi_master *master)
 
 	trace_fsi_master_scan(master, true);
 	for (link = 0; link < master->n_links; link++) {
-		rc = fsi_master_link_enable(master, link);
+		rc = _fsi_master_link_enable(master, link);
 		if (rc) {
 			dev_dbg(&master->dev,
 				"enable link %d failed: %d\n", link, rc);
@@ -1284,6 +1317,130 @@ static struct class fsi_master_class = {
 	.dev_groups = master_groups,
 };
 
+void fsi_master_error(struct fsi_master *master, int link)
+{
+	u32 bits = FSI_MMODE_EIP | FSI_MMODE_RELA;
+	bool mmode = master->mmode & bits;
+
+	if (trace_fsi_master_error_regs_enabled()) {
+		unsigned int mesrb = 0xffffffff;
+		unsigned int mstap = 0xffffffff;
+
+		regmap_read(master->map, FSI_MESRB0, &mesrb);
+		regmap_read(master->map, FSI_MSTAP0 + (link * 4), &mstap);
+
+		trace_fsi_master_error_regs(master->idx, mesrb, mstap);
+	}
+
+	if (mmode)
+		regmap_write(master->map, FSI_MMODE, master->mmode & ~bits);
+
+	regmap_write(master->map, FSI_MRESP0, FSI_MRESP_RST_ALL_MASTER);
+
+	if (mmode)
+		regmap_write(master->map, FSI_MMODE, master->mmode);
+}
+EXPORT_SYMBOL_GPL(fsi_master_error);
+
+static inline u32 fsi_mmode_crs0(u32 x)
+{
+	return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
+}
+
+static inline u32 fsi_mmode_crs1(u32 x)
+{
+	return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
+}
+
+int fsi_master_init(struct fsi_master *master, unsigned long parent_clock_frequency)
+{
+	unsigned int mlevp;
+	unsigned int maeb;
+	int div = 1;
+	int rc;
+
+	if (parent_clock_frequency) {
+		u32 clock_frequency = parent_clock_frequency;
+
+		if (!device_property_read_u32(&master->dev, "clock-frequency", &clock_frequency)) {
+			if (!clock_frequency)
+				clock_frequency = parent_clock_frequency;
+		}
+
+		div = (parent_clock_frequency + (clock_frequency - 1)) / clock_frequency;
+		master->clock_frequency = parent_clock_frequency / div;
+	}
+
+	rc = regmap_write(master->map, FSI_MRESP0, FSI_MRESP_RST_ALL_MASTER |
+			  FSI_MRESP_RST_ALL_LINK | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(master->map, FSI_MECTRL, FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
+	if (rc)
+		return rc;
+
+	master->mmode = FSI_MMODE_ECRC | FSI_MMODE_EPC | fsi_mmode_crs0(div) |
+		fsi_mmode_crs1(div) | FSI_MMODE_P8_TO_LSB;
+	rc = regmap_write(master->map, FSI_MMODE, master->mmode);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(master->map, FSI_MDLYR, 0xffff0000);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(master->map, FSI_MSENP0, 0xffffffff);
+	if (rc)
+		return rc;
+
+	mdelay(FSI_LINK_ENABLE_SETUP_TIME);
+
+	rc = regmap_write(master->map, FSI_MCENP0, 0xffffffff);
+	if (rc)
+		return rc;
+
+	rc = regmap_read(master->map, FSI_MAEB, &maeb);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(master->map, FSI_MRESP0, FSI_MRESP_RST_ALL_MASTER |
+			  FSI_MRESP_RST_ALL_LINK);
+	if (rc)
+		return rc;
+
+	rc = regmap_read(master->map, FSI_MLEVP0, &mlevp);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(master->map, FSI_MRESB0, FSI_MRESB_RST_GEN);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(master->map, FSI_MRESB0, FSI_MRESB_RST_ERR);
+	if (rc)
+		return rc;
+
+	if (master->flags & FSI_MASTER_FLAG_INTERRUPT)
+		master->mmode |= FSI_MMODE_EIP;
+	if (master->flags & FSI_MASTER_FLAG_RELA)
+		master->mmode |= FSI_MMODE_RELA;
+	return regmap_write(master->map, FSI_MMODE, master->mmode);
+}
+EXPORT_SYMBOL_GPL(fsi_master_init);
+
+void fsi_master_regmap_config(struct regmap_config *config)
+{
+	config->reg_bits = 32;
+	config->val_bits = 32;
+	config->disable_locking = true;	// master driver will lock
+	config->fast_io = true;
+	config->cache_type = REGCACHE_NONE;
+	config->val_format_endian = REGMAP_ENDIAN_NATIVE;
+	config->can_sleep = false;
+}
+EXPORT_SYMBOL_GPL(fsi_master_regmap_config);
+
 int fsi_master_register(struct fsi_master *master)
 {
 	int rc;
diff --git a/drivers/fsi/fsi-master.h b/drivers/fsi/fsi-master.h
index 26e636ad9ef6..f4cecdff3834 100644
--- a/drivers/fsi/fsi-master.h
+++ b/drivers/fsi/fsi-master.h
@@ -27,6 +27,9 @@
 #define FSI_MLEVP0		0x18		/* R: plug detect */
 #define FSI_MSENP0		0x18		/* S: Set enable */
 #define FSI_MCENP0		0x20		/* C: Clear enable */
+#define FSI_MSIEP0		0x30		/* R/W: interrupt enable */
+#define FSI_MSSIEP0		0x50		/* S: Set interrupt enable */
+#define FSI_MCSIEP0		0x70		/* C: Clear interrupt enable */
 #define FSI_MAEB		0x70		/* R: Error address */
 #define FSI_MVER		0x74		/* R: master version/type */
 #define FSI_MSTAP0		0xd0		/* R: Port status */
@@ -108,9 +111,15 @@
 
 /* Misc */
 #define	FSI_CRC_SIZE		4
+#define FSI_LINK_ENABLE_SETUP_TIME	10	/* in mS */
 
 /* fsi-master definition and flags */
 #define FSI_MASTER_FLAG_SWCLOCK		0x1
+#define FSI_MASTER_FLAG_INTERRUPT	0x2
+#define FSI_MASTER_FLAG_RELA		0x4
+
+struct regmap;
+struct regmap_config;
 
 /*
  * Structures and function prototypes
@@ -120,6 +129,8 @@
 
 struct fsi_master {
 	struct device	dev;
+	struct regmap	*map;
+	u32		mmode;
 	unsigned long	clock_frequency;
 	int		lbus_divider;
 	int		idx;
@@ -140,6 +151,11 @@ struct fsi_master {
 
 #define to_fsi_master(d) container_of(d, struct fsi_master, dev)
 
+void fsi_master_error(struct fsi_master *master, int link);
+int fsi_master_init(struct fsi_master *master, unsigned long parent_clock_frequency);
+int fsi_master_link_enable(struct fsi_master *master, int link, bool enable);
+void fsi_master_regmap_config(struct regmap_config *config);
+
 /**
  * fsi_master registration & lifetime: the fsi_master_register() and
  * fsi_master_unregister() functions will take ownership of the master, and
diff --git a/include/trace/events/fsi.h b/include/trace/events/fsi.h
index 5509afc98ee8..da977d59e163 100644
--- a/include/trace/events/fsi.h
+++ b/include/trace/events/fsi.h
@@ -67,6 +67,23 @@ TRACE_EVENT(fsi_master_error,
 		  &__entry->data, __entry->ret)
 );
 
+TRACE_EVENT(fsi_master_error_regs,
+	TP_PROTO(int master_idx, uint32_t mesrb, uint32_t mstap),
+	TP_ARGS(master_idx, mesrb, mstap),
+	TP_STRUCT__entry(
+		__field(int, master_idx)
+		__field(uint32_t, mesrb)
+		__field(uint32_t, mstap)
+	),
+	TP_fast_assign(
+		__entry->master_idx = master_idx;
+		__entry->mesrb = mesrb;
+		__entry->mstap = mstap;
+	),
+	TP_printk("fsi%d mesrb:%08x mstap:%08x", __entry->master_idx, __entry->mesrb,
+		  __entry->mstap)
+);
+
 TRACE_EVENT(fsi_master_break,
 	TP_PROTO(const struct fsi_master *master, int link),
 	TP_ARGS(master, link),
-- 
2.39.3


  parent reply	other threads:[~2024-02-26 16:53 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-26 16:52 [PATCH v2 00/31] fsi: Interrupt support Eddie James
2024-02-26 16:52 ` [PATCH v2 01/31] fsi: Move slave definitions to fsi-slave.h Eddie James
2024-02-26 16:52 ` [PATCH v2 02/31] fsi: Improve master indexing Eddie James
2024-02-26 16:52 ` [PATCH v2 03/31] fsi: Use a defined value for default echo delay Eddie James
2024-02-26 16:52 ` [PATCH v2 04/31] fsi: Expose master-specific local bus clock divider Eddie James
2024-02-26 16:52 ` [PATCH v2 05/31] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency Eddie James
2024-02-26 16:52 ` [PATCH v2 06/31] fsi: core: Improve master read/write/error traces Eddie James
2024-02-26 16:52 ` [PATCH v2 07/31] fsi: core: Add slave error trace Eddie James
2024-02-26 16:52 ` [PATCH v2 08/31] dt-bindings: fsi: Add AST2700 compatible Eddie James
2024-02-27  7:14   ` Krzysztof Kozlowski
2024-02-28 15:47   ` Rob Herring
2024-02-26 16:52 ` [PATCH v2 09/31] fsi: aspeed: Add AST2700 support Eddie James
2024-02-26 16:53 ` [PATCH v2 10/31] fsi: core: Add slave spinlock Eddie James
2024-02-26 16:53 ` [PATCH v2 11/31] fsi: core: Allow cfam device type aliases Eddie James
2024-02-26 16:53 ` Eddie James [this message]
2024-02-26 16:53 ` [PATCH v2 13/31] fsi: hub: Use common initialization and link enable Eddie James
2024-02-26 16:53 ` [PATCH v2 14/31] fsi: aspeed: " Eddie James
2024-02-26 16:53 ` [PATCH v2 15/31] fsi: aspeed: Remove cfam reset sysfs file in error path and remove Eddie James
2024-02-26 16:53 ` [PATCH v2 16/31] fsi: aspeed: Refactor trace functions Eddie James
2024-02-26 16:53 ` [PATCH v2 17/31] fsi: aspeed: Don't clear all IRQs during OPB transfers Eddie James
2024-02-26 16:53 ` [PATCH v2 18/31] fsi: aspeed: Only read result register for successful read Eddie James
2024-02-26 16:53 ` [PATCH v2 19/31] fsi: aspeed: Switch to spinlock Eddie James
2024-02-26 16:53 ` [PATCH v2 20/31] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset Eddie James
2024-02-26 16:53 ` [PATCH v2 21/31] fsi: aspeed: Use common master error handler Eddie James
2024-02-26 16:53 ` [PATCH v2 22/31] fsi: core: Add interrupt support Eddie James
2024-02-26 16:53 ` [PATCH v2 23/31] fsi: aspeed: " Eddie James
2024-02-26 16:53 ` [PATCH v2 24/31] fsi: hub: " Eddie James
2024-02-26 16:53 ` [PATCH v2 25/31] i2c: fsi: Calculate clock divider from local bus frequency Eddie James
2024-04-15 22:11   ` Andi Shyti
2024-04-16 18:09     ` Eddie James
2024-04-16 21:20       ` Guenter Roeck
2024-04-17 13:50         ` Eddie James
2024-02-26 16:53 ` [PATCH v2 26/31] i2c: fsi: Improve formatting Eddie James
2024-04-15 22:13   ` Andi Shyti
2024-02-26 16:53 ` [PATCH v2 27/31] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer Eddie James
2024-02-26 16:53 ` [PATCH v2 28/31] i2c: fsi: Remove list structure of ports Eddie James
2024-02-26 16:53 ` [PATCH v2 29/31] i2c: fsi: Define a function to check status error bits Eddie James
2024-02-26 16:53 ` [PATCH v2 30/31] i2c: fsi: Add boolean for skip stop command on abort Eddie James
2024-02-26 16:53 ` [PATCH v2 31/31] i2c: fsi: Add interrupt support Eddie James
2024-02-27 13:44 ` [PATCH v2 00/31] fsi: Interrupt support Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240226165321.91976-13-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=alistair@popple.id.au \
    --cc=andi.shyti@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jk@ozlabs.org \
    --cc=joel@jms.id.au \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lakshmiy@us.ibmcom \
    --cc=linux-fsi@lists.ozlabs.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.