From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
devicetree@vger.kernel.org, andi.shyti@kernel.org,
eajames@linux.ibm.com, alistair@popple.id.au, joel@jms.id.au,
jk@ozlabs.org, robh@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
lakshmiy@us.ibmcom
Subject: [PATCH v2 30/31] i2c: fsi: Add boolean for skip stop command on abort
Date: Mon, 26 Feb 2024 10:53:20 -0600 [thread overview]
Message-ID: <20240226165321.91976-31-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240226165321.91976-1-eajames@linux.ibm.com>
In preparation for interrupt support, store whether to skip the
final stop command during the abort procedure instead of checking
the previously read status register in the abort function.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
drivers/i2c/busses/i2c-fsi.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
index 5f524fb6f0f8..33f4e64cb60b 100644
--- a/drivers/i2c/busses/i2c-fsi.c
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -116,6 +116,9 @@
#define I2C_STAT_ANY_RESP (I2C_STAT_ERR | \
I2C_STAT_DAT_REQ | \
I2C_STAT_CMD_COMP)
+#define I2C_STAT_SKIP_STOP (I2C_STAT_PARITY | \
+ I2C_STAT_LOST_ARB | \
+ I2C_STAT_STOP_ERR)
/* extended status register */
#define I2C_ESTAT_FIFO_SZ GENMASK(31, 24)
@@ -150,6 +153,7 @@ struct fsi_i2c_master {
struct mutex lock;
u32 clock_div;
u8 fifo_size;
+ bool skip_stop;
};
struct fsi_i2c_port {
@@ -459,31 +463,30 @@ static int fsi_i2c_reset_engine(struct fsi_i2c_master *i2c, u16 port)
return 0;
}
-static int fsi_i2c_abort(struct fsi_i2c_port *port, u32 status)
+static int fsi_i2c_abort(struct fsi_i2c_port *port)
{
struct fsi_i2c_master *i2c = port->master;
u32 cmd = I2C_CMD_WITH_STOP;
unsigned long start;
- u32 stat;
+ u32 status;
int rc;
rc = fsi_i2c_reset_engine(i2c, port->port);
if (rc)
return rc;
- rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_STAT, &stat);
+ rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_STAT, &status);
if (rc)
return rc;
/* if sda is low, peform full bus reset */
- if (!(stat & I2C_STAT_SDA_IN)) {
+ if (!(status & I2C_STAT_SDA_IN)) {
rc = fsi_i2c_reset_bus(i2c, port);
if (rc)
return rc;
}
- /* skip final stop command for these errors */
- if (status & (I2C_STAT_PARITY | I2C_STAT_LOST_ARB | I2C_STAT_STOP_ERR))
+ if (i2c->skip_stop)
return 0;
/* write stop command */
@@ -534,7 +537,8 @@ static int fsi_i2c_handle_status(struct fsi_i2c_port *port,
int rc;
if (status & I2C_STAT_ERR) {
- rc = fsi_i2c_abort(port, status);
+ port->master->skip_stop = status & I2C_STAT_SKIP_STOP;
+ rc = fsi_i2c_abort(port);
if (rc)
return rc;
--
2.39.3
next prev parent reply other threads:[~2024-02-26 16:54 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-26 16:52 [PATCH v2 00/31] fsi: Interrupt support Eddie James
2024-02-26 16:52 ` [PATCH v2 01/31] fsi: Move slave definitions to fsi-slave.h Eddie James
2024-02-26 16:52 ` [PATCH v2 02/31] fsi: Improve master indexing Eddie James
2024-02-26 16:52 ` [PATCH v2 03/31] fsi: Use a defined value for default echo delay Eddie James
2024-02-26 16:52 ` [PATCH v2 04/31] fsi: Expose master-specific local bus clock divider Eddie James
2024-02-26 16:52 ` [PATCH v2 05/31] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency Eddie James
2024-02-26 16:52 ` [PATCH v2 06/31] fsi: core: Improve master read/write/error traces Eddie James
2024-02-26 16:52 ` [PATCH v2 07/31] fsi: core: Add slave error trace Eddie James
2024-02-26 16:52 ` [PATCH v2 08/31] dt-bindings: fsi: Add AST2700 compatible Eddie James
2024-02-27 7:14 ` Krzysztof Kozlowski
2024-02-28 15:47 ` Rob Herring
2024-02-26 16:52 ` [PATCH v2 09/31] fsi: aspeed: Add AST2700 support Eddie James
2024-02-26 16:53 ` [PATCH v2 10/31] fsi: core: Add slave spinlock Eddie James
2024-02-26 16:53 ` [PATCH v2 11/31] fsi: core: Allow cfam device type aliases Eddie James
2024-02-26 16:53 ` [PATCH v2 12/31] fsi: core: Add common regmap master functions Eddie James
2024-02-26 16:53 ` [PATCH v2 13/31] fsi: hub: Use common initialization and link enable Eddie James
2024-02-26 16:53 ` [PATCH v2 14/31] fsi: aspeed: " Eddie James
2024-02-26 16:53 ` [PATCH v2 15/31] fsi: aspeed: Remove cfam reset sysfs file in error path and remove Eddie James
2024-02-26 16:53 ` [PATCH v2 16/31] fsi: aspeed: Refactor trace functions Eddie James
2024-02-26 16:53 ` [PATCH v2 17/31] fsi: aspeed: Don't clear all IRQs during OPB transfers Eddie James
2024-02-26 16:53 ` [PATCH v2 18/31] fsi: aspeed: Only read result register for successful read Eddie James
2024-02-26 16:53 ` [PATCH v2 19/31] fsi: aspeed: Switch to spinlock Eddie James
2024-02-26 16:53 ` [PATCH v2 20/31] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset Eddie James
2024-02-26 16:53 ` [PATCH v2 21/31] fsi: aspeed: Use common master error handler Eddie James
2024-02-26 16:53 ` [PATCH v2 22/31] fsi: core: Add interrupt support Eddie James
2024-02-26 16:53 ` [PATCH v2 23/31] fsi: aspeed: " Eddie James
2024-02-26 16:53 ` [PATCH v2 24/31] fsi: hub: " Eddie James
2024-02-26 16:53 ` [PATCH v2 25/31] i2c: fsi: Calculate clock divider from local bus frequency Eddie James
2024-04-15 22:11 ` Andi Shyti
2024-04-16 18:09 ` Eddie James
2024-04-16 21:20 ` Guenter Roeck
2024-04-17 13:50 ` Eddie James
2024-02-26 16:53 ` [PATCH v2 26/31] i2c: fsi: Improve formatting Eddie James
2024-04-15 22:13 ` Andi Shyti
2024-02-26 16:53 ` [PATCH v2 27/31] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer Eddie James
2024-02-26 16:53 ` [PATCH v2 28/31] i2c: fsi: Remove list structure of ports Eddie James
2024-02-26 16:53 ` [PATCH v2 29/31] i2c: fsi: Define a function to check status error bits Eddie James
2024-02-26 16:53 ` Eddie James [this message]
2024-02-26 16:53 ` [PATCH v2 31/31] i2c: fsi: Add interrupt support Eddie James
2024-02-27 13:44 ` [PATCH v2 00/31] fsi: Interrupt support Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240226165321.91976-31-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=alistair@popple.id.au \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jk@ozlabs.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lakshmiy@us.ibmcom \
--cc=linux-fsi@lists.ozlabs.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.