All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
	devicetree@vger.kernel.org, andi.shyti@kernel.org,
	eajames@linux.ibm.com, alistair@popple.id.au, joel@jms.id.au,
	jk@ozlabs.org, robh@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
	lakshmiy@us.ibmcom
Subject: [PATCH v2 13/31] fsi: hub: Use common initialization and link enable
Date: Mon, 26 Feb 2024 10:53:03 -0600	[thread overview]
Message-ID: <20240226165321.91976-14-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240226165321.91976-1-eajames@linux.ibm.com>

Set up an FSI regmap for the hub master to use the new common
master initialization and link enable procedures.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 drivers/fsi/fsi-master-hub.c | 141 ++++++-----------------------------
 1 file changed, 23 insertions(+), 118 deletions(-)

diff --git a/drivers/fsi/fsi-master-hub.c b/drivers/fsi/fsi-master-hub.c
index 111bf7a11458..92aa07055c56 100644
--- a/drivers/fsi/fsi-master-hub.c
+++ b/drivers/fsi/fsi-master-hub.c
@@ -9,6 +9,7 @@
 #include <linux/fsi.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 
 #include "fsi-master.h"
@@ -16,8 +17,6 @@
 
 #define FSI_ENGID_HUB_MASTER		0x1c
 
-#define FSI_LINK_ENABLE_SETUP_TIME	10	/* in mS */
-
 /*
  * FSI hub master support
  *
@@ -78,134 +77,33 @@ static int hub_master_break(struct fsi_master *master, int link)
 	return hub_master_write(master, link, 0, addr, &cmd, sizeof(cmd));
 }
 
-static int hub_master_link_enable(struct fsi_master *master, int link,
-				  bool enable)
-{
-	struct fsi_master_hub *hub = to_fsi_master_hub(master);
-	int idx, bit;
-	__be32 reg;
-	int rc;
-
-	idx = link / 32;
-	bit = link % 32;
-
-	reg = cpu_to_be32(0x80000000 >> bit);
-
-	if (!enable)
-		return fsi_device_write(hub->upstream, FSI_MCENP0 + (4 * idx),
-					&reg, 4);
-
-	rc = fsi_device_write(hub->upstream, FSI_MSENP0 + (4 * idx), &reg, 4);
-	if (rc)
-		return rc;
-
-	mdelay(FSI_LINK_ENABLE_SETUP_TIME);
-
-	return 0;
-}
-
 static void hub_master_release(struct device *dev)
 {
 	struct fsi_master_hub *hub = to_fsi_master_hub(to_fsi_master(dev));
 
+	regmap_exit(hub->master.map);
 	kfree(hub);
 }
 
-/* mmode encoders */
-static inline u32 fsi_mmode_crs0(u32 x)
-{
-	return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
-}
-
-static inline u32 fsi_mmode_crs1(u32 x)
-{
-	return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
-}
-
-static int hub_master_init(struct fsi_master_hub *hub)
-{
-	struct fsi_device *dev = hub->upstream;
-	__be32 reg;
-	int rc;
-
-	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
-			| FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
-	rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
-	if (rc)
-		return rc;
-
-	/* Initialize the MFSI (hub master) engine */
-	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
-			| FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
-	rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
-	if (rc)
-		return rc;
-
-	reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
-	rc = fsi_device_write(dev, FSI_MECTRL, &reg, sizeof(reg));
-	if (rc)
-		return rc;
-
-	reg = cpu_to_be32(FSI_MMODE_EIP | FSI_MMODE_ECRC | FSI_MMODE_EPC
-			| fsi_mmode_crs0(1) | fsi_mmode_crs1(1)
-			| FSI_MMODE_P8_TO_LSB);
-	rc = fsi_device_write(dev, FSI_MMODE, &reg, sizeof(reg));
-	if (rc)
-		return rc;
-
-	reg = cpu_to_be32(0xffff0000);
-	rc = fsi_device_write(dev, FSI_MDLYR, &reg, sizeof(reg));
-	if (rc)
-		return rc;
-
-	reg = cpu_to_be32(~0);
-	rc = fsi_device_write(dev, FSI_MSENP0, &reg, sizeof(reg));
-	if (rc)
-		return rc;
-
-	/* Leave enabled long enough for master logic to set up */
-	mdelay(FSI_LINK_ENABLE_SETUP_TIME);
-
-	rc = fsi_device_write(dev, FSI_MCENP0, &reg, sizeof(reg));
-	if (rc)
-		return rc;
-
-	rc = fsi_device_read(dev, FSI_MAEB, &reg, sizeof(reg));
-	if (rc)
-		return rc;
-
-	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK);
-	rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
-	if (rc)
-		return rc;
-
-	rc = fsi_device_read(dev, FSI_MLEVP0, &reg, sizeof(reg));
-	if (rc)
-		return rc;
-
-	/* Reset the master bridge */
-	reg = cpu_to_be32(FSI_MRESB_RST_GEN);
-	rc = fsi_device_write(dev, FSI_MRESB0, &reg, sizeof(reg));
-	if (rc)
-		return rc;
-
-	reg = cpu_to_be32(FSI_MRESB_RST_ERR);
-	return fsi_device_write(dev, FSI_MRESB0, &reg, sizeof(reg));
-}
-
 static int hub_master_probe(struct device *dev)
 {
+	struct regmap_config hub_master_regmap_config;
 	struct fsi_device *fsi_dev = to_fsi_dev(dev);
 	struct fsi_master_hub *hub;
+	struct regmap *map;
 	uint32_t reg, links;
-	__be32 __reg;
 	int rc;
 
-	rc = fsi_device_read(fsi_dev, FSI_MVER, &__reg, sizeof(__reg));
+	fsi_master_regmap_config(&hub_master_regmap_config);
+	hub_master_regmap_config.reg_base = fsi_dev->addr;
+	map = regmap_init_fsi(fsi_dev, &hub_master_regmap_config);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	rc = regmap_read(map, FSI_MVER, &reg);
 	if (rc)
-		return rc;
+		goto err_regmap;
 
-	reg = be32_to_cpu(__reg);
 	links = (reg >> 8) & 0xff;
 	dev_dbg(dev, "hub version %08x (%d links)\n", reg, links);
 
@@ -213,7 +111,7 @@ static int hub_master_probe(struct device *dev)
 			FSI_HUB_LINK_SIZE * links);
 	if (rc) {
 		dev_err(dev, "can't claim slave address range for links");
-		return rc;
+		goto err_regmap;
 	}
 
 	hub = kzalloc(sizeof(*hub), GFP_KERNEL);
@@ -229,22 +127,25 @@ static int hub_master_probe(struct device *dev)
 	hub->master.dev.parent = dev;
 	hub->master.dev.release = hub_master_release;
 	hub->master.dev.of_node = of_node_get(dev_of_node(dev));
+	hub->master.map = map;
 
 	hub->master.lbus_divider = 1;
 	hub->master.idx = fsi_dev->slave->link + 1;
 	hub->master.n_links = links;
+	hub->master.flags = FSI_MASTER_FLAG_INTERRUPT;
 	hub->master.read = hub_master_read;
 	hub->master.write = hub_master_write;
 	hub->master.send_break = hub_master_break;
-	hub->master.link_enable = hub_master_link_enable;
 
 	dev_set_drvdata(dev, hub);
 
-	hub_master_init(hub);
+	rc = fsi_master_init(&hub->master, fsi_device_local_bus_frequency(fsi_dev));
+	if (rc)
+		goto err_free;
 
 	rc = fsi_master_register(&hub->master);
 	if (rc)
-		goto err_release;
+		goto err_free;
 
 	/* At this point, fsi_master_register performs the device_initialize(),
 	 * and holds the sole reference on master.dev. This means the device
@@ -256,9 +157,13 @@ static int hub_master_probe(struct device *dev)
 	get_device(&hub->master.dev);
 	return 0;
 
+err_free:
+	kfree(hub);
 err_release:
 	fsi_slave_release_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
 			FSI_HUB_LINK_SIZE * links);
+err_regmap:
+	regmap_exit(map);
 	return rc;
 }
 
-- 
2.39.3


  parent reply	other threads:[~2024-02-26 16:53 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-26 16:52 [PATCH v2 00/31] fsi: Interrupt support Eddie James
2024-02-26 16:52 ` [PATCH v2 01/31] fsi: Move slave definitions to fsi-slave.h Eddie James
2024-02-26 16:52 ` [PATCH v2 02/31] fsi: Improve master indexing Eddie James
2024-02-26 16:52 ` [PATCH v2 03/31] fsi: Use a defined value for default echo delay Eddie James
2024-02-26 16:52 ` [PATCH v2 04/31] fsi: Expose master-specific local bus clock divider Eddie James
2024-02-26 16:52 ` [PATCH v2 05/31] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency Eddie James
2024-02-26 16:52 ` [PATCH v2 06/31] fsi: core: Improve master read/write/error traces Eddie James
2024-02-26 16:52 ` [PATCH v2 07/31] fsi: core: Add slave error trace Eddie James
2024-02-26 16:52 ` [PATCH v2 08/31] dt-bindings: fsi: Add AST2700 compatible Eddie James
2024-02-27  7:14   ` Krzysztof Kozlowski
2024-02-28 15:47   ` Rob Herring
2024-02-26 16:52 ` [PATCH v2 09/31] fsi: aspeed: Add AST2700 support Eddie James
2024-02-26 16:53 ` [PATCH v2 10/31] fsi: core: Add slave spinlock Eddie James
2024-02-26 16:53 ` [PATCH v2 11/31] fsi: core: Allow cfam device type aliases Eddie James
2024-02-26 16:53 ` [PATCH v2 12/31] fsi: core: Add common regmap master functions Eddie James
2024-02-26 16:53 ` Eddie James [this message]
2024-02-26 16:53 ` [PATCH v2 14/31] fsi: aspeed: Use common initialization and link enable Eddie James
2024-02-26 16:53 ` [PATCH v2 15/31] fsi: aspeed: Remove cfam reset sysfs file in error path and remove Eddie James
2024-02-26 16:53 ` [PATCH v2 16/31] fsi: aspeed: Refactor trace functions Eddie James
2024-02-26 16:53 ` [PATCH v2 17/31] fsi: aspeed: Don't clear all IRQs during OPB transfers Eddie James
2024-02-26 16:53 ` [PATCH v2 18/31] fsi: aspeed: Only read result register for successful read Eddie James
2024-02-26 16:53 ` [PATCH v2 19/31] fsi: aspeed: Switch to spinlock Eddie James
2024-02-26 16:53 ` [PATCH v2 20/31] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset Eddie James
2024-02-26 16:53 ` [PATCH v2 21/31] fsi: aspeed: Use common master error handler Eddie James
2024-02-26 16:53 ` [PATCH v2 22/31] fsi: core: Add interrupt support Eddie James
2024-02-26 16:53 ` [PATCH v2 23/31] fsi: aspeed: " Eddie James
2024-02-26 16:53 ` [PATCH v2 24/31] fsi: hub: " Eddie James
2024-02-26 16:53 ` [PATCH v2 25/31] i2c: fsi: Calculate clock divider from local bus frequency Eddie James
2024-04-15 22:11   ` Andi Shyti
2024-04-16 18:09     ` Eddie James
2024-04-16 21:20       ` Guenter Roeck
2024-04-17 13:50         ` Eddie James
2024-02-26 16:53 ` [PATCH v2 26/31] i2c: fsi: Improve formatting Eddie James
2024-04-15 22:13   ` Andi Shyti
2024-02-26 16:53 ` [PATCH v2 27/31] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer Eddie James
2024-02-26 16:53 ` [PATCH v2 28/31] i2c: fsi: Remove list structure of ports Eddie James
2024-02-26 16:53 ` [PATCH v2 29/31] i2c: fsi: Define a function to check status error bits Eddie James
2024-02-26 16:53 ` [PATCH v2 30/31] i2c: fsi: Add boolean for skip stop command on abort Eddie James
2024-02-26 16:53 ` [PATCH v2 31/31] i2c: fsi: Add interrupt support Eddie James
2024-02-27 13:44 ` [PATCH v2 00/31] fsi: Interrupt support Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240226165321.91976-14-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=alistair@popple.id.au \
    --cc=andi.shyti@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jk@ozlabs.org \
    --cc=joel@jms.id.au \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lakshmiy@us.ibmcom \
    --cc=linux-fsi@lists.ozlabs.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.