[PATCH v5 2/5] dt-bindings: phy: hisi-inno-usb2: convert to YAML

[Yang Xiwen <forbidden405@outlook.com>]

convert the legacy text binding to YAML. While at it, remove
"hisilicon,inno-usb2-phy" fallback compatible.

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
---
 .../bindings/phy/hisilicon,inno-usb2-phy.yaml      | 91 ++++++++++++++++++++++
 .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 71 -----------------
 2 files changed, 91 insertions(+), 71 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml
new file mode 100644
index 000000000000..ba82405ddf51
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,inno-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon HiSTB SoCs INNO USB2 PHY device
+
+maintainers:
+  - Yang Xiwen <forbidden405@outlook.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - hisilicon,hi3798cv200-usb2-phy
+
+  reg:
+    maxItems: 1
+    description: Should be the address space for PHY configuration register in
+      peripheral controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC,
+      or direct MMIO address space.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    maxItems: 1
+    description: reference clock
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  'phy@[0-9a-f]+':
+    type: object
+    additionalProperties: false
+    description: individual ports provided by INNO PHY
+
+    properties:
+      reg:
+        maxItems: 1
+        description: should be the port index (if under a perictrl node)
+          or port address space
+
+      '#phy-cells':
+        const: 0
+
+      resets:
+        maxItems: 1
+
+    required:
+      - reg
+      - '#phy-cells'
+      - resets
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    usb2-phy@120 {
+        compatible = "hisilicon,hi3798cv200-usb2-phy";
+        reg = <0x120 0x4>;
+        clocks = <&clk_ref>;
+        resets = <&crg 0xbc 4>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy@0 {
+            reg = <0>;
+            #phy-cells = <0>;
+            resets = <&crg 0xbc 8>;
+        };
+
+        phy@1 {
+            reg = <1>;
+            #phy-cells = <0>;
+            resets = <&crg 0xbc 9>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
deleted file mode 100644
index 104953e849e7..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-Device tree bindings for HiSilicon INNO USB2 PHY
-
-Required properties:
-- compatible: Should be one of the following strings:
-	"hisilicon,inno-usb2-phy",
-	"hisilicon,hi3798cv200-usb2-phy".
-- reg: Should be the address space for PHY configuration register in peripheral
-  controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC.
-- clocks: The phandle and clock specifier pair for INNO USB2 PHY device
-  reference clock.
-- resets: The phandle and reset specifier pair for INNO USB2 PHY device reset
-  signal.
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-
-The INNO USB2 PHY device should be a child node of peripheral controller that
-contains the PHY configuration register, and each device supports up to 2 PHY
-ports which are represented as child nodes of INNO USB2 PHY device.
-
-Required properties for PHY port node:
-- reg: The PHY port instance number.
-- #phy-cells: Defined by generic PHY bindings.  Must be 0.
-- resets: The phandle and reset specifier pair for PHY port reset signal.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties
-
-Example:
-
-perictrl: peripheral-controller@8a20000 {
-	compatible = "hisilicon,hi3798cv200-perictrl", "simple-mfd";
-	reg = <0x8a20000 0x1000>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x0 0x8a20000 0x1000>;
-
-	usb2_phy1: usb2-phy@120 {
-		compatible = "hisilicon,hi3798cv200-usb2-phy";
-		reg = <0x120 0x4>;
-		clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
-		resets = <&crg 0xbc 4>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb2_phy1_port0: phy@0 {
-			reg = <0>;
-			#phy-cells = <0>;
-			resets = <&crg 0xbc 8>;
-		};
-
-		usb2_phy1_port1: phy@1 {
-			reg = <1>;
-			#phy-cells = <0>;
-			resets = <&crg 0xbc 9>;
-		};
-	};
-
-	usb2_phy2: usb2-phy@124 {
-		compatible = "hisilicon,hi3798cv200-usb2-phy";
-		reg = <0x124 0x4>;
-		clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
-		resets = <&crg 0xbc 6>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb2_phy2_port0: phy@0 {
-			reg = <0>;
-			#phy-cells = <0>;
-			resets = <&crg 0xbc 10>;
-		};
-	};
-};

-- 
2.43.0